|
| 1 | Providing and fitting fixing steel sheet enclosed switch fuse unit (suitable for DIN fuses), triple pole with Neutral Link (TPN), 415/500 Volt, L & T / Havells / BCH make etc. complete as per specification and direction of the Engineer-in-charge. |
| 2 | i) 63 amps |
| 3 | ii) 100 amps |
| 4 | Providing and fitting fixing of Fully Automatic Star Delta type Motor starter ( 3 ph. 50 Hz, 415V, in Steel Sheet Enclosures with Contractors and Timer etc. complete suitable for submersible Pump L & T, BCH, ABB make as per specification and direction of the Engineer-in-charge.i) 25 HP / 18.5 kw Relay range within 13-21 + 10% |
| 5 | Providing and fitting fixing of 6 feet x 4 feet x 1 inch (thickness ) Gamair wood panel board for fitting fixing of electrical items,including 2 nos. MS angle post (size 2 inch x 2inch x 9 feet, nuts & bolts etc. for irrection of the same by 1:1.5:3 cement concrete casting ( 1feet x1feet x 2feet) below the ground level & painting two or more coats and Plastic paints as per specification and direction of the Engineer - in - charge. |
| 6 | Providing and fitting fixing of iron type, Range 0-500 Volts , 96 mm x 96 mm size AC Voltmeter ( L&T/ AE make) with selector switch as a electrical instrument of the pannel board as per specification and direction of the Engineer - in - charge. |
| 7 | Providing & fitting fixing of moving iron type, Range 0- 100/0-200 amps , 96 mm x 96 mm size AC Amps meter direct reading type ( L&T /AE make ) with selector switch & CT coil as a electrical instrument of the pannel board as per specification and direction of the Engineer - in - charge. |
| 8 | Providing & fitting fixing of Moulded Case Circuit Breaker ( MCCB) of thermal release range,415+Volt, 50 Hz. (L&T , BCH, ABB make) as per specification and direction of the Engineer - in - charge. |
| 9 | i) 32-40 Amps |
| 10 | ii) 63-80 Amps |
| 11 | Providing and fitting fixing of PVC insulated 3 core flat Copper cable conforming to relevant IS code for submersible motor with all necessary equipments and fittings as required as per specification and direction of the Engineer-in-charge. |
| 12 | i) 4.0 sqmm |
| 13 | ii) 6.0 sqmm |
| 14 | Providing & fitting fixing with PVC insulated single core multistrand Copper cable confirming to IS 694 for inter connection with all electrical equipment of the pannel board as specification and direction of the Engineer - in - charge. i) 16 sqmm |
| 15 | Providing and Fitting Fixing of Single phasing Preventer +selectable under voltage +selectable over voltage on delay 5 Sec & off Delay 15 sec phase asymmetry 10% L&T/BCH/HAVELS/ Siemens etc. make complete as per specifiction and direction of the Engineer-in-charge. |
| 16 | Providing & supplying of Kit-kat Rewireable Porcelain Fuse (Cut-Out) carrier & base of Havell's made ( Delux Quality) |
| 17 | a) 63Amps/415 Volt |
| 18 | b)100Amps/415 Volt |
| 19 | Providing and fitting fixing of spare contact kit without coil (L&T make) for Auto Star Delta Starter |
| 20 | a) ML-2 type |
| 21 | b) ML-1.5 type |
| 22 | Providing and fitting fixing of standard operating coil L&T make for Auto star delta starter. |
| 23 | a) ML-2 type |
| 24 | b) ML-1.5 type |
| 25 | Providing & fitting fixing thermal overload relay for automatic star delta starter of L&T make of relay range 28-12 Amps /14-21 A/ 21-28 A . |
| 26 | Providing and Fitting fixing of Motor Protection Circuit Breaker(MPCB) 24-32 (MOG H1) amps in/c UV/OV release |
| 27 | Supplying and fitting fixing of 3 pole power Contractor (Type-ML) suitable for 10 HP to 25 HP motor.Type ML-2 (For L&T Make Starter) |
| 28 | Providing and fitting fixing heavy duty box type (Resinfilled) power factor correction capacitor L&Tmakeetc.complete as per specification and direction of the Engineer-in-charge.i. 5-15 kVAr 440 V Please Enable Macros to View BoQ information |
