|
| 1 | Supplying, Installation, Testing & Commissioning of LED Recessed/ surface Down lighter (Round/ square/ Rectangular) SMD type of following body material with PMMA and prismatic diffuser and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -50C to 400C, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free (flicker should be below 5%), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K /4000°K / 5700°K / 6500°K (As per ANSI Bin), SDCM (Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be confirming to relevant BIS standards. Manufactures Word Mark / Name Engraved/ Embossing/ Screen printing on housing Complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 and <120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C) |
| 2 | 18 watt |
| 3 | Supplying, Installation, Testing & Commissioning of Flood Light, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMI-EMC as per CISPR -15, lenses for beam angle 30 deg-120deg as per the application and the project requirement., suitable tilt able fitting, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin) , SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output .LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in- Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). |
| 4 | 150 watt |
| 5 | Supplying, installation, Testing & Commissioning of Street light LED fixture powder coated pressure die cast aluminium body with driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMIEMC As per CISPR -15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin),SDCM (Standard Deviation Colour Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output .LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). |
| 6 | 25 watt |
| 7 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/ RCCB / Isolator). |
| 8 | 4 way (4 + 12), Double door |
| 9 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. |
| 10 | Upto 35 sq. mm |
| 11 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. |
| 12 | Upto 35 sq. mm (clamped with 1mm thick saddle) |
| 13 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. |
| 14 | 63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 15 | Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. |
| 16 | 25 mm |
| 17 | 32 mm |
| 18 | Supplying and making outdoor end termination with cast resin compound including aluminium lugs and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. |
| 19 | 4 X 16 sq. mm |
| 20 | 4 X 25 sq. mm |
| 21 | Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 22 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required |
| 23 | Single pole |
| 24 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 25 | Supplying & fixing of pole window cover made of G.I of 3mm thickness with sleeve type arrangement on existing pole whose cover is missing i/c welding of sleeve around pole, providing and fixing allen bolt of suitable size as per direction of Engineer-in-charge. (Note: Sample must approved before installation at site). |
| 26 | SITC of 25 Amp Three Pole (ML-1.5 or equivalent) Power Contactor in the existing panel i/c connection cable and thimbling etc complete as required. |
| 27 | SITC of Digital Type Timer in the existing panel i/c connection cable and thimbling etc complete as required. |
| 28 | Fabrication, Supplying and fixing of wiremesh frame work made out of 40 mmx40mm x5mm thick Angle iron having 40x6mm flat strip & wiremesh 6 swg dia m.s wire with 25mmx75mm space in between mesh & providing top cover for rain protection made out by 16 SWG MS Sheet and making main door gate having suitable locking arrangement with godown lock i/c grouting with cement concrete & primer and spray painting with super synthetic enamel paint of approved colour quality etc complete as reqd. |
| 29 | Providing & laying of copper flexible FRLS PVC insulated PVC sheathed copper conductor cable unarmoured for split AC making connection complete etc as reqd. |
| 30 | 3 x 4 sqmm |
| 31 | SITC of weather proof pole box made out of hot moulded SMC sheet clamp /fastner Complete with inter connection with copper wire, earthing etc complete as required. |
| 32 | (Approx Box Size 400 x 300 x 190) |
| 33 | SITC of weather proof pole box made out of hot moulded SMC sheet with 6 Amp SP MCB, din channel, connector plate, clamp /fastener Complete with inter connection with copper wire, earthing etc complete as required. |
| 34 | (Approx Box Size -155 x 100 x 60) |
| 35 | Fabrication, supplying and erection of following size Pole made out of G.I Pipe medium class i/c cutting, welding, as per site requirement and fixing with suitable size clamp & welding with existing structure complete etc as required |
| 36 | 50 mm |
| 37 | 32 mm |
| 38 | Installation of Decorative LED Post Top fittings on the existing decorative pole & fixing with suitable size reducer as per dia of the pole i/c making connection testing, commissioning etc complete as required. |
| 39 | Less credit for old dismantle and unserviceable material |
| 40 | Assorted size light fittings |
| 41 | Brunt out / damaged aluminium cable |
| 42 | Brunt out / damaged copper cable |
| 43 | Design, Fabrication, supply, installation, testing and commissioning of 3 dimensional LED Acrylic wall/ stand mount signage board with backlit outdoor type display signage board in English language & as per approved colour and design, content \\"PWD and logo of PWD \\" symbol shall be as per direction of engineer-in-charge, embossed letter having height up to 4ft, Front line view width of letter up to 4\\" to 6\\" and depth up to 3\\" to 4\\" fabricated out Acrylic sheet of 3mm thick in front, back and side wall made out board of SS 304 of thickness 2 mm approved quality and colour as per embossed letter pattern and joints to be filled up with water proof silicon where ever required to make the whole structure water proof and dust proof & shall be fixed in such a way to give uniform bright light in sun also to the characters and with inbuilt protection to make the light disturbance free and having operating temperature -10° C to 50°C, LED driver shall be pasted in the letters with IP-66 or more grade protection i/c wiring the entire board with specially designed power cables for power LED shall be outdoor grade etc. complete as reqd. be of different sizes as per the requirements complete etc. as required. |
| 44 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 45 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc., up to floor five level, excluding the cost of centering, shuttering and finishing : |
| 46 | 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 47 | SITC of weather proof pole box made out of hot moulded SMC sheet with 6 Amp SP MCB, din channel, connector plate, clamp /fastner Complete with inter connection with copper wire, earthing etc complete as required. |
| 48 | (Approx Box Size -200 x 140 x 95) |
| 49 | Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. |
| 50 | 32 mm |
| 51 | Supplying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade aluminium armoured cable of following size for connection of the fitting to the pole as required. |
| 52 | 3 x 6 Sq.mm Please Enable Macros to View BoQ information |
