|
| 1 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven storied height made with 40 mm dia M.S tube 1.5 m Centre to Centre, horizontal & vertical tubes joining with cup & lock system with M. S tubes, M. S tube challis, M. S clamps and M.S staircase system in the scaffolding for working platform etc. and maintaining in a serviceable condition for the required duration at approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc. wherever required for inspection of work at Garbhagriha, Natamandapa, Bhoga mandapa, bhoga passage etc with essential safety features for the workmen etc. Complete as per direction and approval of engineer-in-charge |
| 2 | Providing and fixing wooden plank heavy rigid platform at various stages scaffolding for smooth execution of inspection work and conservation work with all complete as per direction of Engineer In charge. |
| 3 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 4 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre |
| 5 | Finishing wall with acrylic smooth exterior paint of required shade old work two or more coat applied @ 1.67 ltr /10sqm on existing cement paint surface |
| 6 | Removing decayed enamel painting by scarping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. |
| 7 | Provision for ready mixed red oxide zinc chromate primer of approved brand and manufacture for priming of scaffolding material like tubular pipes , MS ladders, clamps, base etc. to protect from corrosion in saline climate like Puri. |
| 8 | Painting with synthetic enamel paint of approved brand & manufacture of required color to give an even shade (One or more coat coats on Old work) |
| 9 | Provision for Dry cleaning of surface / stainless steel jally of ceiling with stick broom, hand cloth, water etc. and cleaning of joints of Natamandapa, Bhogamandapa, and bimana of Shree Jagannath temple. |
| 10 | Raking out joints of stone masonry surface to the required width and depth with due care and precaution by mechanical/manual means, including preparing and cleaning the surface for re-pointing /refilling of joints, including disposal of rubbish to the dumping ground within 50 mtr. Lead etc., complete as directed by the Engineer in-charge of work.. |
| 11 | Pointing of joints with polymer modified Cementous (PMC) joint sealant with 8% polymer loading .The sealant mix should be Ordinary Portland cement (OPC) , khandolite stone dust and acrylic based polymer emulsion in the ratio of 1:2.2 by weight appropriate dose of Non shrink compound .The solid resin content in the acrylic based resin emulsion should be minimum of 40 %. |
| 12 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead. |
| 13 | Taking out carefully damaged brick work manually including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of engineer-in-charge |
| 14 | Restoration of the missing damaged and dislodged stone members in the walls, corbels, ceiling, challi with good quality dressed khondolite stone blocks obtained from approved quarry/ OMC stockyard in the combination mortar 1:2 (I Lime : 2 sand) and fixed with as per the original texture |
| 15 | Providing and fixing of 20 mm dia S.S threaded bar 304 L grade after drilling with 25 mm dia drilling bit through existing stone masonry and thoroughly cleaning the same following proper method (Air blow, Brush) & finally 20mm dia bar to be fixed and bolt should be fixed with high performance injectable stone adhesive for proper filling of void (HIT-V-R-M20X 380 RE10 or HILTI or equivalent.) [Cost includes charges of required manpower and materials, excluding the cost of scaffoldings] |
| 16 | Lime terracing on slopped Pidha stone layers with lime concrete, 2:2:7 (2 lime putty : 2 surkhi : 7 brick khoa ) laid to proper slope, thoroughly beaten and cured including top finishing on Pidha stone layers etc., shaping and finishing complete as per direction of site in- charge. |
| 17 | Provision of composite cement plastering with modified styrene butadiene emulsion polymer in a composition of (1:4) for the sloping or vertical surface above ground level in cement sand of 20mm layers. |
| 18 | Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/ by mechanical means including stacking of serviceable and disposal of unserviceable material within 50 metres lead.. |
| 19 | Providing and laying of dressed and machine cut khondolite stone plates of Avg size (40-50x30x10) CM obtained from Govt. approved khondolite stone quarry including transportation, loading unloading charges up to the inside the temple, laying and finishing with 25 mm of cement- sand mortar (1:4) etc. complete as per the direction of the site in-charge. |
| 20 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meters lead. |
| 21 | Providing and laying khondolite stone flooring in required design and patterns, with 40 mm thick stone slab over 25 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the engineer-in-Charge. |
| 22 | Provision for shifting and cleaning of debris , broken stone pieces , dead lime plaster OR disposable item from the Shree Jagannath Temple premises to outside of temple by head load and then shifting to the municipality dumping ground 15 km by tractor etc as per direction of engineer in charge . |
| 23 | Provision for plastering of (20-40 mm ) avg thick with Lime, sand, stone dust composite mortar in 1:1:1 ratio (1 Lime: 1 Sand : 1 khondolite stone dust) added with modified emulsion polymer by 10% of mortar weight with desired coat to match the original texture Please Enable Macros to View BoQ information |
