|
| 1 | e/w in surface excavation not exceeding 30 cm in depth but exceeding 1.5 mtr width as well as 10 sqmt on plan including getting out and disposal of excavated earth upto 50 mtr and lift upto 1.5 mtr as directed by engineer-in-charge 2.1.1 all kind of soil. Chaptter-4 Sr No.1 Ref to DSR/PWD 2.6(2.6.1) |
| 2 | p/l in position cement concrete of specified grade excluding the cost of shuttering all work upto plinth level 1:4:8 (stone aggregate 40mm nominal size) Chapter No. 5 Sl. 1 Ref to DSR/PWED 4.1.8 |
| 3 | p/l in position cement concrete of specified grade excluding the cost of shuttering all work upto plinth level 1:2:4 (1 cement : 2 corsesand Zone III : 4 grade stone aggregate 20mm nominal size) Chapter No. 5 Sl. 1 Ref to DSR/PWED 4.1.3 |
| 4 | Centing and shuttering including shuttering propering etc. and removal of form work for (upto 5th floor) Foundations, footing, base for columns, Chapter-5 Sl No. 3 Ref. to DSR/PWD 4.3.1 |
| 5 | M.S (Tor steel or plain ) in plain work such as R.C.C or R.B work including cutting / bending for proper shape as necessary including supply of all steel & wastage ,bend ,hook & authorised overlapping shall be measured … complete item. (A/R) |
| 6 | 12 mm thick cement plaster in single coat of fair side wall with 1 :4 cement & fine sand including all labours, materials, T&P etc all complete. (PWD Sch 13 SL No. 1 ref. to DSR/PWD13.1.1 |
| 7 | Brick work with common burnt clay (Non Modular) Bricks of class-150 in foundation and plinth in: cement mortar 1:6 DSR 6.1.2 |
| 8 | S/f of MS anchor bolt with nut 20 mm dia 60cm long with hold fast . |
| 9 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.DSR 10.16.1 |
| 10 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.D.S.R.10.2 |
| 11 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. D.S.R 12.50 |
| 12 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : |
| 13 | Painging and varnishing on iron works in small areas or new wood work with one coat of ready mixed priming paint & one coat of approved superiod quality ready mixed paint of clear synthetic varnish including supply of all materials labour and T & P etc. required for proper completion of the work paint to be used should confirm to the DSR 13.53.1 |
| 14 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade includingrubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent DSR 11.55.1 |
| 15 | Supply installation testing and commissioning of ceilinf fan….completeitem DSR 9.2.3 |
| 16 | Led flood light powder coated pressure die cast aluminium (system lumen efficary_> 120 and 130 135 im/watt) DSR 8.16.3 |
| 17 | wiring for light point/fan point …..complete item DSR 1.10.1 |
| 18 | supplying and drwaing following size of frls/hffr pvc ….complete item DSR 1.17.29 (2 x 6 sqmm) |
| 19 | S/F of 4x2.5 feet size granite stone at site including writing painting with graving and cartage up to site complete/ Please Enable Macros to View BoQ information |
