|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : Garrison Engineer Kapurthala Name of Work : Repair to barbed wire fencing, chain link fencing, security wall, hardstanding, path, certain protective works for various and repairs to drain, sewage line, septic tank, soakage pit etc; including smart periodical in APS and ADVS Beas area under GE Kapurthala Contract No : GE KPT- /2026-27 Bidder Name : SCHEDULE OF WORKS(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # S.No Description of work Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Figures To be entered by the Bidder Rs. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Dismantling posts or struts (wood, steel or RCC) embedded in concrete, brick work, masonary etc of any section including taking out embedded portion and making good disturbed ground, complete all as specified and as directed. |
| 3 | Dismantling of galvanised mild steel barbed wire of any description from fencing post (RCC or Steel) complete all as specified and as directed. |
| 4 | Dismantling of fencing wire mesh of any type complete all as specified and as directed. |
| 5 | Excavation in post holes (or similar holes) each not exceeding 0.50 Cum, and getting out & removing surplus soil not exceeding 50m and making good surface in loose/soft soil complete all as specified and as directed. |
| 6 | M&L for cement concrete 1:3:6 (40mm graded stone aggregate),type C-2, as in foundation, filling and mass concrete complete all as specified and as directed. |
| 7 | S&F of mild steel works as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc including all necessary drilling, bolting or riveting, flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed. |
| 8 | Supply only GI chain link fencing of any size or type complete all as specified and as directed. |
| 9 | Fixing only GI chain link fencing of any size or type including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire, complete all as specified and as directed. |
| 10 | S&F of mild steel screw bolts (machine made) with hexagonal or Square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washer and one hexagonal or square nut, exceeding 5cm but not exceeding 10cm long, dia of shank 11 to 15 mm, complete all as specified and as directed. |
| 11 | M&L for mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 12 | S&F of galvanised 2 strand, barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire with staples or steel, complete all as specified and as directed. |
| 13 | Demolition of PCC in ground floors/ PCC path/plinth protection and paving not exceeding 15cm thickness (below or above ground level) etc; complete all asspecified. |
| 14 | M&L for cement concrete type D-2, 1:4:8 (40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed. |
| 15 | M&L for cement concrete type D2, 1:3:6(40mm graded stone aggregate) as in foundations, filling and mass concrete, complete all as specified and directed |
| 16 | M&L for sand under floors or in foundations including watering and consolidation, complete all as specified and as directed. |
| 17 | M&L for machine pressed precast concrete interlocking paver block, 60mm thick, any shape and size, confirming to IS-15658-2006, M-40 grade, with grey cement and no pigment complete all as specified and as directed. |
| 18 | M&L for machine pressed precast concrete interlocking paver block, 100mm thick, any shape and size, confirming to IS-15658-2006, M-50 grade, with grey cement and no pigment complete all as specified and directed |
| 19 | M&L for providing cement concrete 1:2:4, Type B-1 (20 mm graded stone aggregates) as in bed blocks, coping, etc complete all as specified and as directed. |
| 20 | M&L for chequered cement concrete tiles 30cm x 30cm x 22mm thick, set, jointed and pointed in neat cement slurry as in floors/path with grey cement and no pigment to match over and including screed bed or bedding layer of mortar 20mm thick in cement mortar 1:4 complete all as specified and as directed. |
| 21 | Dismantling of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and as directed. |
| 22 | M&L for brick work with sub class 'B' bricks using old size bricks straight or curved on plan exceeding 6m mean radious built in cement mortar 1:4 complete all as specified and as directed. |
| 23 | M&L for brick work with subclass ‘B’ bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6, complete all as specified and as directed. |
| 24 | - ditto - all as per item No 22 above but except bricks including cleaning mortar etc; complete all as specified and as directed. |
| 25 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed. |
| 26 | M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:6 on walls finished even and fair without using extra cement, complete all as specified and as directed. |
| 27 | M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:4 on walls finished even and smooth without using extra cement, complete all as specified and as directed. |
| 28 | M&L fo rendering 5mm thick in cement mortar 1:3 on ceiling surfaces, finished even and smooth without using extra cement complete all as specified and directed. |
| 29 | M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over and including a coat of primer, complete all asspecified. |
| 30 | M&L for preparation of new plastered surfaces and distempering walls with two coats of distemper oil emulsion, white or tinted over and including 1mm thick wall care putty including primer, complete all as specified. |
| 31 | M&L for preparation of newly plastered surface of walls and applying two coats of exterior emulsion paint on walls over and including a coat of primer, complete all as specified. |
| 32 | M&L fo preparation of new plastered and unplastered surfaces of ceiling and applying two coats oil bound distemper complete all as specified and directed. |
| 33 | M&L fo preparation of new plastered surface of walls and applying two coats of plastic Emulsion paint over a coat of alkali resistant primer complete all as specified and directed. |
| 34 | M&L for preparation of new plastered surfaces of wall, any description over 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed. |
| 35 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all asspecified. |
| 36 | M&L 75mm thick PCC 1:4:8, type D-2 as in sub base for pavement, path etc, complete all as specified and directed. |
| 37 | M&L for machine cut kota stone slab flooring 18-20mm thick over and incl 15mm thick rendering in cement and sand motar 1:4 laid with cement slurry mixed with pigment to match the shade of the shade of the slab incl rubbing and polishing complete all as specified and directed. |
| 38 | M&L for coloured glazed ceramic tiles in vertical surface 450 X 300 X 7mm thick laid over and including 10mm thick screed bed in cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed. |
| 39 | M&L for granite 16-18mm thick work in steps, jambs, pillars, window cills, cooking platform and like in cement mortar(1:4) including pointing in white cement (1:2) including 15mm thick bedding layer in cement mortar 1:6 complete all as specified and directed. |
| 40 | M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations, complete all as specified and directed. |
| 41 | Dismantling plain or corrugated asbestos cement (corrugated, semi-corrugated,etc) sheets in roof coverings complete all as specified. |
| 42 | M&L for rolled mild steel work in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed |
| 43 | M&L for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 44 | M&L for pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed .. |
| 45 | S&F of Fibre glass Reinforced translucent corrugated sheeting 2mm thick with two corrugations sides lap fixed coach screw and washer in roof, wall etc, complete all as specified and directed |
| 46 | M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over and including a coat of red oxide primer complete all asspecified. |
| 47 | M&L for precast cement concrete type B-1, 1:2:4 as in cover slabs over drain/manholes etc. including necessary formwork, complete all as specified. |
| 48 | M&L for clearing blockage of Gully, floor and any type of traps upto first manhole by Roding/ pressure to clear blockage and making the site neat & tidy complete all as specified and as directed.Note :- (a) In case of cleaning the blockage of IWC/ EWC & GT, FT to first manhole gets blocked within seven days then payment of later complaints shall not be allowed.(b) Executives are responsible for checking the actual position and payment irrespective of Nos of Complaints.(c) In case clearing of blockage of sewage line not attended/ cleared by the contractor within 24 hours then recovery of Rs.150/- each job shall be recovered from contractor. |
| 49 | M&L for clearing sewage lines dia 150mm or 200mm or 300mm for depth not exceeding 1.5m starting from GL as in sewage system by Roding and other mechanical methods and make it functional by removing & taken out sludge & also dispose off sludge outside defence land complete all as specified and as directed. Note :- (a) Length of line shall be measured from manhole to manhole. In case of cleaning the blockage gets blocked within seven days then payment of later complaints shall not be allowed.(b) Executives are responsible for checking the actual position and payment irrespective of Nos of Complaints.(c) In case clearing of blockage of sewage line not attended/ cleared by the contractor within 24 hours then recovery of Rs.150/- each job shall be recovered from contractor. |
| 50 | M&L for clearing blockage of manholes by pressure pumping / Roding and removing the garbage out of the cantonment area making the site neat & tidy complete all as specified and directed.Note :- (a) In case of cleaning the blockage of manhole gets blocked within seven days then payment of later complaints shall not be allowed.(b) Executives are responsible for checking the actual position and payment irrespective of Nos of Complaints.(c) In case clearing of blockage of manhole not attended/ cleared by the contractor within 24 hours then recovery of Rs.150/- each job shall be recovered from contractor. |
| 51 | M&L for soakage wells of size 2.4m dia & 3.00 m deep, excavation, in any type of soil, foundation in PCC 1:3:6, wells of honey combed and solid brick masonry in cement mortar 1:4 and cover slab in RCC 1:1 1/2 : 3, type A-1 using 20mm graded crushed stone aggregate, PCC band in type B-1 (1:2:4) including interconnecting pipes, filling with brick bats complete all asspecified. |
| 52 | Demolition and breaking up 200mm bore drain pipes (salt glazed ware or AC pipe) set in cement mortar and taking out from trenches complete all asspecified. |
| 53 | Excavation in trenches in soft / loose soil not exceeding 1.5 metre wide and not exceeding 1.5 metre deep for foundation, laying of pipes and for manholes not exceeding 10 Sq.m area on plan and for similar works and getting out complete all as specified. |
| 54 | M&L for lean cement concrete 1:5:10 type E-2 using 40 mm graded stone aggregate as in filling and mass concrete complete all as specified. |
| 55 | M&L for cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregates) as in drains, coping, benching, water troughs, including weathering , slightly rounded or chamfered, and throating including form work complete all as specified. |
| 56 | M&L for for Reinforced cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregates) as in slab of old septic tank, soak well, cover slab etc supported on walls, beams & columns in floors, roofs, landings, balconies, canopies, deckslabs & in shelves & the like etc complete all as specified. |
| 57 | Use and waste of formwork with fair finished flat concrete surfaces such as soffits of suspended slab, such as roof slabs, floor slabs, landings & similar work, n exc 200mm thick, horizontal or sloping complete all as specified. |
| 58 | Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified. |
| 59 | M&L for Mild steel TMT bars 8 to 12 mm dia cut to length, bent to shape including cranking bending and binding with MS wire (annealed) not less than 0.9 mm dia complete all as specified. |
| 60 | M&L for concrete bed to 200mm dia drain pipes in cement concrete (1 : 4 : 8) type D-2 using 40mm graded crushed stone aggregate including packing under and haunching against the sides of pipe after they are laid and tested complete all as specified. |
| 61 | M&L for reinforced concrete 200mm dia pipes, class NP2, laid and jointed complete with collars in trenches, on concrete bed to required slope, jointed and tested complete all as specified. (Excavation, Earth work and concrete bed shall be measured and paid for separately under appropriate items of Sch 'A') |
| 62 | Returning filling in trenches including spreading leveling watering and well ramming in layers each not exc 25cm complete all as specified. |
| 63 | Removal of surplus soil to a distance n.exc 50m away and depositing where directed at a level n.exc 1.50 m above the starting point complete all as specified. |
| 64 | M&L for extra forming, fair, finished, drain or channel, 30cm inner girth in cement concrete using extra cement complete all as specified. |
| 65 | M&L for cutting into existing manholes for connecting new drains, of any dia making good to pipe and rendering , cutting out existing benching for and forming branch channel (1/2 round or ¾ section) in cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregates) finished smooth and reforming benching as required for 200 mm dia SGSW pipe complete all as specified. |
| 66 | S&F of rotational moulded polyethlene water storage tanks of capacity 1000 litres three layers (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of existing PVC tank of any capacity complete all as specified and directed. |
| 67 | S&F of rotational moulded polyethlene water storage tanks of capacity 500 litres three layers (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of existing PVC tank of any capacity complete all as specified and directed. |
| 68 | S&F of 20mm dia ball valves, high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 210gms) complete all as specified and directed. |
| 69 | S&F of PVC (SWR) 110mm bore pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified. |
| 70 | S&F of PVC (SWR) 75mm bore pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified. |
| 71 | S&F of PVC (SWR) pipe, 110mm dia pipe, single socketed in any length with rubber ring joints, laid in trenches or in floors etc complete all as specified. |
| 72 | S&F of PVC (SWR) bends ( any radius ) diminishing pleces or tapers 110mm bore complete all as specified. |
| 73 | S&F of PVC (SWR) bends ( any radius ) diminishing pieces or tapers 75mm bore complete all as specified. |
| 74 | S&F of 110mm bore PVC (SWRl) junction, single 'T' equal or unequal with access door complete all as specified. |
| 75 | S&F of 110mm bore PVC (SWR) couplers/ socket complete all as specified. |
| 76 | S&F of PVC (SWR) floor trap 75mm dia including jointing to waste pipe fixed in cement concrete 1:2:4 type B1 (including cutting in existing walls, removing the old and place the new pieces and making good the disturbed portion) complete all as specified. |
| 77 | S&F of PVC cowl 75mm bore fixed, with pipe complete all asspecified. |
| 78 | M&L for complete removal of existing treatment and scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots including cleaning of any mortar drops, fungus efflorescent salts etc on wall,ceiling, roof projections including facia, cornices and make to surface clean,free from dust, loose paint etc by skilled labour complete all as specified and directed. Note:- Cost of Scaffolding upto 10m height of building shall be incl in the quoted rate. |
| 79 | M&L for waterproof cement based putty of thickness 1mm over the plastered/old painted wall/celling after scrapping and prepare the surface even and smooth complete and sanding of the putty surface to make the surface free from dust etc. by skilled labour. Allow 6-8 hrs time to dry the putty surface. complete all as specified and directed by Eng-In-Charge Note:- Cost of Scaffolding upto 10m height of building shall be incl in the quoted rate |
| 80 | M&L for applying two coats of oil bound distemper on walls using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed. Note:- Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. Proper masking to be carried out before primer and paint application) complete all as specified and directed by Eng-In-Charge.Cost of Scaffolding upto 10m height of building shall be incl in the quoted rate |
| 81 | M&L for two coat water based premium acrylic smooth exterior emulsion on walls of approved colour with silicon additive & Color stay Technology, Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both the coats of paint complete all as specified and directed.Note:- (a) The work pertaining to periodical services & Water Proofing shall be executed by authorized applicator through manufacturer of which the materials .i.e. Paint, Distemper, Putty etc. is proposed to be used by the contractor and approved by GE.(b) Cost of scaffolding upto 10m height of building shall be included in the quoted rate, complete all as specified and directed by Eng-In-Charge |
| 82 | M&L for preparation of old decorated surfaces of walls and cornics by complete removal of existing treatment by applying water and scrapping of entire thickness of existing treatment with using steel scraper and thereafter applying 2mm wall care putty to achieve smooth finish complete all as specified and directed. |
| 83 | M&L for preparation of old plaster surfaces and applying two coat of Oil bound distemper complete all as specified and directed. Note :- OBD to be done by Roller. |
| 84 | M&L for preparation of old plastered surface of walls and applying two coats of plastic Emulsion paint over a coat of alkali resistant primer complete all as specified and directed. |
| 85 | M&L for preparation of old painted surfaces of wall and applying two coat of synthetic enamel paint complete all as specified and directed. |
| 86 | M&L for preparation of old wooden surfaces of any description and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 87 | M&L for preparation of old steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 88 | M&L for preparation of old decorated surfaces of walls by complete removal of existing treatment by applying water and scrapping of entire thickness of existing treatment with using steel scraper and thereafter, applying two coat of exterior emuslion paint/weather proof coat, complete all as specified and directed. Note:- Exterior emulsion paint to be done by Roller. |
| 89 | M&L for preparation of old surfaces shall include brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots (complete removal of existing treatment) and applying two coats of cement based paint complete all as specified and directed. |
| 90 | M&L for preparation of old surfaces of ceiling and applying two coats of white wash complete all as specified and directed. |
| 91 | M&L for ATT treatment to the soil along with external perimeter of building at rate of 2.25 litre of emulsion per meter of perimeter wall complete all as specified and directed. |
| 92 | M&L for ATT treatment of soil under existing floors using emulsion @ one litre per holes 300mm apart including drilling and plugging 12mm dia holes with cement motar 1:2 (1 cement :2 coarse sand) to match the shade with existing floor complete all as specifed and directed. |
| 93 | M&L for ATT treatment at point of contact of wood work by chemical emulsion ( in oil or kerosene base solution) @0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified. |
| 94 | M&L for ranking out joints/pointing to cement motar on brick work in walls etc; complete all as specifed and directed |
| 95 | M&L for flush pointing using 1:4 cement motar to brick walls, complete all as specifed and directed. |
| 96 | M&L for new pointing surface applying two coats of waterproof exterior emulsion terracotta colored paint over a coat of alkali resistant primer on walls complete all as specified and directed. |
| 97 | M&L for preparation of old pointing surface and applying two coats of waterproof exterior emulsion paint over a coat of alkali resistant primer on walls, complete all as specified and directed. |
| 98 | Use and waste of formwork to chajjas and similar items including edges rough finished complete all as specified and directed. |
| 99 | M&L for TMT bars 10mm dia and over, cut to length bent to shape required, including cranking, bending hooking etc; and binding with mild steel binding steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 100 | M&L for RCC 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate as in chajjas etc. complete all as specified and directed. |
| 101 | M&L for dugging out average 10mm thick on disturbed chajja beam, slab portion, parapet and applying chicken wire mesh over disturbed portion fixed with drilling, bolting etc after anti corrosion treatment of steel bar and finally finished with 10mm thick (1:3) cement plaster mixed with WPC @3% by the weight of cement all as specified and directed.Note:- (a) The bars which are corroded badly needs to be strengthen by placing new bars by means of proper splicing and will be measured and paid separately under appropriate item.(b) RCC 1:2:4 type B-0 to be measured and paid seprately(ii) The rate of item includes necessary shuttering, scaffholding, staging etc all as specified and directed. |
| 102 | M&L for PCC type B-0 (1:2:4) (Using 12.5mm graded crushed stone aggregate) as in parapets walls , benching, coping and filling at junction of brickworks and the like incl weathering, slighty rounded or chamfered angles and throating,as directed complete incl use of formworks (straight or curved), complete all as specifed and directed |
| 103 | M&L for preparation of old decorated concrete surface of road sides kerb stone and applying two coat of coloured road paint over a coat of appropriate primer, complete all as specified and directed |
| 104 | M&L for complete removal of existing treatment and scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots including cleaning of any mortar drops, fungus efflorescent salts etc on wall,ceiling, roof projections including facia, cornices etc; on building exceeding 5mtr but n.exc.12mtr height and applying two coat of exterior emuslion paint/weather proof paint over a coat of primer complete all as specified and directed by Eng-in-Charge. Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
