|
| 1 | Taking down of chowkhat with shutter (without taking off shutters from the frame) area n-exc 1.50 sqm each complete all as specified and directed |
| 2 | All as per item No 1.00 here-in-before but area exc 1.50 Sqm but n-exc 4.0 Sqm each |
| 3 | Taking down of sutters of any description exc 1.0 sqm but n-exc 2 Sqm each complete all as specified and directed |
| 4 | M&L for 30 mm thick flush shutters, solid core construction, with block board core and plywood face, pannels, commercial type on both sides including provision of suitable blocks for taking mortice locks, latches or other fittings complete all as specified and directed. |
| 5 | Supply and fixing aluminium anodised barrel tower bolts of extruded section and fixed of 200mm long complete all as specified and directed |
| 6 | Supply and fixing aluminium alloy anodised sliding door bolt 300mm long with haps staple bolt type and fixing clips of sheet etc complete all as specified and directed |
| 7 | Supply and fixing 150mm long aluminium handles cast type anodized complete all as specified and directed |
| 8 | Supply and fixing powder coated aluminium window/ventilator, openable type(double shutter, one glass and one wiremesh), frame and shutter made out of hollow extruded aluminium sections, as approved and fixed with and including 3 to 4mm thick tinted/froasted/black glass with glazing clips rubber beading/gasket, s/s wiremesh shutter, anodised aluminium beading screws, 100mm hinges, 150mm handles, and making provosion for fixing of exaust fan, etc complete all as specified and directed |
| 9 | M&L Framed work such as grills, gratings, etc.. with ends of bars, shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk, ways; railings; framework of, water tanks and similar work, conforming to Fe.290.Gde-E-165 complete all as specified and directed |
| 10 | Supply and fixing for Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed |
| 11 | S&F, Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame complete all as specified and directed |
| 12 | Supply and fixing for 100mm long but hinges heavy duty cold rolled mild steel medium weight complete all as specified and directed |
| 13 | S&F anodised aluminium door shutters, with and including anodised aluminium frame with one or more rebates, both with aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as aluminium handle 2 No's in each door, hinges, and including 5 to 6 mm thick glass (black)/aluminium composit pannelas directed and aluminium grill fixed to frame complete all as specified and directed |
| 14 | M&L, 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed |
| 15 | All as per item No 14.00 here-in-before but in repair |
| 16 | Hacking out old broken glasses (any thickness) size quality or description from wooden/steel frame complete all as specified and directed |
| 17 | Supply & fix 3mm thick sheet glass, ordinary quality glazing with oil putty or fixed with wooden beads or in steel windows in square n.exc. 0.50sqm each pane incl one coat of synthetic enamel paint to oil putty complete all as specified and directed |
| 18 | Supply & fix in repair Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and verage width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed |
| 19 | Resecuring or easying and adjusting without taking down shutters of any description(door/window) exe 1 sq.m but n exe 2.0 sqm each complete all as specified and directed |
| 20 | Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed |
| 21 | S&F, Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed |
| 22 | Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed |
| 23 | S&F rolled mild steel in roof trusses, (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee,angle,channel or flat sections) including distance pieces, cleats etc conforming to Fe-410-W Gde E-250 quality A complete all as specified and directed. |
| 24 | M&L preparation of new or previously untreated wooden surfaces of any description, not other wise described over 10cm width or girth and apply two coat of synthetic enamel paint over and including a coat of pink primer (by spraying) complete all as specified and directed |
| 25 | Material and labour for two coats of synthetic enamel paint over one coat of red oxide primer on new or previously untreated steel surfaces of any description incl preparation of surface over 10cm width or girth complete all as specified and directed |
| 26 | S&F in repairs bib taps, cast copper alloy , fancy type, chromium plated, long body with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule or to GI socket complete all as specified and directed. |
| 27 | S&F in repairs pillar taps, cast copper alloy, with capston heads, fancy type chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and fly nuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed. |
| 28 | M&L 15mm bore, senser based, touchless (automatic type), pillar tap, cast copper alloy, with capston heads, fancy type chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and fly nuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed |
| 29 | S&F in repair angular stop cock with wall flange, cast copper alloy , fancy type, chromium plated with crutch or butterfly handles, screwed down, screwed both ends for 15 mm bore GI pipe or for brass ferrule or to GI socket complete all as specified and directed. |
| 30 | S&F in repair for 600x450mm bevelled edge looking mirror of selected quality glass 4 mm thick mounted on 6mm thick AC building board or commercial ply wood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified & directed. |
| 31 | Supply and fixing in repair PVC connections 15mm bore, 450 mm length with PTMT nuts complete all as specified and directed |
| 32 | Description all as per item No 43.00 here-in-before but length 600mm. complete all as specified and directed |
| 33 | S&F in repair tubular towel rail , brass, chromium plated, fancy type, min 60 cm long between flanges fixed with and including CP brass screws, rawl plug etc complete all as specified and directed |
| 34 | S&F in repair soap dish/plate , 3mm thick stainess steel of size 300 x 100mm, fancy type , with impression/mould for soap, paste etc alongwith adequet perforations, holes for tooth brush fixed to wall with rawl plugs and chromium plated screws complete all as specified and directed. |
| 35 | Supply and fixing in repair PVC valveless, syphonic action type, flushing cistern, 10 ltr capacity, low level, white, with inlet, ball valve, float and handle including brackets and PVC bend including connection to IWC/EWC and fixing on wall with brackets complete all as specified and directed |
| 36 | S&F in repairs vitreous china squatting pan ' Orissa pattern' size 580 x 440 mm, white with integral foot rest (excluding flushing cistern and flush pipe) with cast iron ' P ' trap and including connecting to trap and flushing pipe, anti syphonage pipe etc complete & including making good to floor complete all as specified and directed. |
| 37 | Supply and fixing in repair vitreous china wash down water closet pan (Pedestal Pattern) white excluding flushing cistern but including flush pipe, plastic water closet seat white/black, connection to out going pipe and flushing pipe complete all as specified and directed |
| 38 | S&F in repair vitreous china wash hand basin (flat back) of size 580x450mm excluding taps, waste,chain and plug and porcelain stopper but including one number waste fittings, 32 mm dia, brass, chromium plated with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, with & including 32 mm dia PVC waste pipe 610 mm long with connector,with and including MS brackets and cutting for and pinning in ends of brackets complete all as specified and directed. |
| 39 | Ditto all as per item No 52.00 above but oval type, fixing with granite platform, complete all as specified and directed |
| 40 | Taking down steel tubing and connections incl cleaning for refixing or removal from site for 15 mm bore pipe complete all as specified and directed |
| 41 | All as per item No 40.00 here-in-before but for 20 mm bore pipe |
| 42 | Supply and fixing 15 mm bore tubes medium grade galvanized with all fittings and fixed complete to walls and ceilings or laid in floors of any length complete all as specified and directed |
| 43 | All as per item No 42.00 here-in-before but for 20 mm dia |
| 44 | Supply and fixed in repair vitreous china urinal, full stall type, white including grating, union for discharge pipe, waste pipe and fixed with and including S&F, fully automatic, touchless, wall mounted, stianless steel urinal flusher with sensor with and including supply and fixing of all connected/necessary items, including fixing plugs beading urinal against wall in CM 1:2, securing urinal to plugs with brass screws 60 mm long, pointing around urinal in white cement, other electrical items complete all as specified and directed |
| 45 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect including necessary fixing arrangement as per manufactures instructions complete all as specified and directed. |
| 46 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 47 | M&L for non skid coloured Ceramic tiles,first quality( of approved class , colour and design/ shade ) 7 to 8 mm thick (Square/ rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floor surface etc set and jointed in neat cement slurry and pointed in coloured cement to match with shade of coloured tiles over and including 15 mm thick screed bed in Cement mortar 1: 6 Complete all as specified and directed. |
| 48 | M&L for glazed coloured ceramic tiles ,first quality ( of approved class , colour and design/ shade ) of size 450 x 300 x 7 to 8 mm thick in vertical surfaces, as in dado / skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with shade of coloured tiles, over and including 10 mm thick rendering in cement mortar (1:4), rough finish to receive the tiles complete all as specified and directed. |
| 49 | M&L for vitrefied coloured Ceramic tiles,first quality( of approved class ,light Shade, double charged ), 8 to 10 mm thick (Square/ rectangular),polished, area of each tiles not exceeding 0.36 sqm, as in floor surface etc set and jointed in neat cement slurry and pointed in coloured cement to match with shade of coloured tiles over and including 15 mm thick screed bed in Cement mortar 1: 6 Complete all as specified and directed. |
| 50 | M&L for vitrefied coloured Ceramic tiles,first quality( of approved class ,dark Shade), 10 mm thick (Square/ rectangular),polished, area of each tiles not exceeding 0.36 sqm, ,(cut in required size), fixed on vertical surfaces, as in dado / skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with shade of coloured tiles, over and including 10 mm thick rendering in cement mortar (1:4), rough finish to receive the tiles complete all as specified and directed. |
| 51 | M&L for granite stone black machine cut 18 to 20 mm thick fixed on any surface ie steps, jambs,pillar window cills, cooking platform and the like etc set in cement mortar 1:4 and pointed with white cement (1:2) using marble dust and admixture of pigment to match with shade of stone including grinding, rubbing and polishing mirror finish and half rounding of the exposed faces of stone , with and including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed. |
| 52 | M&L 75 mm thick cement concrete type C-2, 1:3:6 using 40mm graded stone aggregates as in plinth protection finishing cement concrete even and smooth without using extra cement complete all as specified and directed. |
| 53 | Taking down cement or cement lime plaster of any description including racking out joints, hacking for keys ,scrubbing down with water etc complete all as specified and directed. |
| 54 | Material and labour for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished fair and even as in wall complete all as specified and directed. |
| 55 | Material and labour for rendering 15 mm thick using ready mix plaster bags on brick work or concrete surfaces, finished surface even and smooth as in wall complete all as specified and directed. |
| 56 | M&L Rendering 5 mm thick in cement mortar (1:3), on fair faces of concrete surfaces, finished even and smooth, over and including fixing of chicken wiremesh with nails and set with cement slurry and paste before plastering on ceiling complete all as specified & directed. |
| 57 | M&L for preparing new plastered or un-plastered surfaces, & applying wall care putty 1.5 to 2 mm thick on prepared surface for smooth finishing and applying two coats of oil emulsion distemper with using roller, over a coat of suitable primering as a base coat as per manufacturer's instructions with using rollar, complete all as specified and directed. |
| 58 | M&L for preparing new plastered or un-plastered surfaces & applying 1.5 to 2 mm thick exterior grade wall care putty on existing prepared surface for smooth finishing and applying two coats of weather proof exterior emulsion paint silicon based with using roller, over a coat of water based suitable primering as a base coat as per manufacturer's instructions with using roller, complete all as specified and directed. |
| 59 | Demolition of brick or stone boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone works and precast concrete articles, complete all as specified and directed |
| 60 | M&L Brick work with sub class 'B' bricks, old size straight or curved on plan exc 6m mean radius built in CM 1:6 Complete all as Specified and directed |
| 61 | M&L for brick work (except bricks), old size straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar 1:6 complete all as specified and directed. |
| 62 | M&L Brickwork with sub- class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed. |
| 63 | S&F in repair PVC (SWR) pipe 110 mm bore, single socketed, in any length with rubber ring joints including jointed with approved adhesive and fixed to wall/ under floor with suitable clamps complete all as specified and directed. |
| 64 | S&F in repair PVC (SWR) pipe 75 mm bore, single socketed, in any length with rubber ring joints including jointed with approved adhesive and fixed to wall/ under floor with suitable clamps complete all as specified and directed. |
| 65 | S&F in repair PVC (SWR) bend 75 mm bore, any radius as required and jointed with approved adhesive complete all as specified & directed. |
| 66 | S&F in repair PVC (SWR) branch piece,75 mm bore, single (single Y) equal or unequal and jointed with approved adhesive complete all as specified & directed. |
| 67 | S&F in repair PVC (SWR) bend 110 mm bore, any radius as required and jointed with approved adhesive complete all as specified & directed. |
| 68 | S&F in repair PVC (SWR) branch piece,110 mm bore, single (single Y) equal or unequal and jointed with approved adhesive complete all as specified & directed. |
| 69 | Supply & fix in repair PVC (SWR) vent cowl 110 mm bore, and jointed with approved adhesive complete all as specified & directed. |
| 70 | M&L, 75mm dia, PVC (SWR) multi floor trap, with grating including jointing with solvent cement, complete all as specified & directed. |
| 71 | Disconnecting & taking down existing water tank any type and S&F rotational moulded polyethylene water storage tanks 500 liter capacity (cylindrical vertical with closed top) with and including ball brass valves high pressure with polythene float and fly nut, complete screwed for iron pipe or for brass ferrule, hoisted and fixed in position all as specified in SSR Part I 2009 complete all as specified & directed. |
| 72 | All as per item no 71 but water storage tanks 1000 liter capacity complete all as specified and directed. |
| 73 | S&F in repair 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified & directed. |
| 74 | Material & labour for sunken slab treatment comprising of the following :-(a) Taking out/ down old existing sunken slab treatment and cleaning the old RCC surfaces of sunken slab including removal of the rubbish from the site of work putside of defence land.(b) Material & labour for 50mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) over cleaned sunken slab surfaces.(c) Material & labour for applying bituminous priming coat/tack coat over PCC surfaces @ 0.30 Kg per square metre of surfaces. (d) Material & labour for applying bitumin grade 85/25 over priming coat @ 1.20 Kg per Square metre. (e) Material & labour for 25mm thick plastering in CM 1:4 using water proofing compound (WPC) @ 3% by weight of cement. on wall of sunken floor (f) Material & labour for suitable thickness of PCC 1:5:10 type E-2 (using 40mm graded broken brick aggregate) for filling in the sunken portion of slab up to its floor level.(g) Supply & fix PVC (SWR) floor trap of 75/110mm dia and 32mm dia GI pipe medium grade, 450m long (for draining out the water) complete all as specified and directed |
| 75 | Material and labour for cleaning of sewage lines from manholes to manhole of any length (Manhole to manhole consider Each Job) for any depth by rodding and well flushing the sewage lines after removing sludge including taking off the manhole covers and refixing after cleaning of manhole of any size and depth. The manhole lines to be cleaned by mechanical sludge trailor and all sludge to be removed a distance of 500m outside of the Cantt area (Note -: (a) The contractor shall provide sufficient labours everyday to clear for all types sewage line blockage complaints, (b) The period of completion for each complaints shall be 24 Hours (c) It will be the responsibility of the contractor to get the complaints completed with in stipulated period the labour shall be made available during the office hours for any complaints(d) The payment shall be made to the contractor on the basis of job done on complaints slip for each complaint. No payment shall be done for any incomplete work .The contractor to quote the rates accordingly). |
| 76 | Cleaning/Clearing blokage of WC's/traps(any type) upto & incl 1st Manhole etc complete all as specified and directed |
| 77 | Dewatering of soak well/soak pit including connected septic tank by discharging the sewage water into a sealed tanker with pipe system including vehicle and other arrangements and disposing outside cantt area, complete all as specified and directedNote: 4000 Ltr capacity tank shall be measured as one unit) |
| 78 | Demolition of RCC of any description and in any position not otherwise specifically provided for complete all as specified and directed |
| 79 | M & L PCC (1:2:4) Type B-1 using (20mm graded stone aggregate) as in precast cover slabs for man holes/Soakage Well/Septic Tank, set in cement mortar 1:4, with and including necessary form work, placing in desired position, complete all as specified and directed. |
| 80 | M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed |
| 81 | M&L for RCC NP3 150mm diameter pipes laid on 150mm thick bed with and including excavation in any type of soil, RFR, removing of surplus soil, including construction of manholes/drop manhole of standard size as directed, made of Brick masonry in cm 1:4 and covered with RCC covers, including all items and activities to execute and make sewer line functional up to 1.50m depth , complete all as specified and directed |
| 82 | Labour only, desilting, completely removing of vegitation growth, cleaning of surfacecs, etc of existing drain of any section, and thrown away out of defence land, complete all as specified and directed |
| 83 | Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and directed |
| 84 | S&F in repair for 1200x450mm looking mirror of selected quality glass 4 mm thick mounted on 6mm thick AC building board or commercial ply wood and fixed to wooden plugs with chromium plated brass screws and cup washers, with and including LED based illuminating background light, complete all as specified and directed Please Enable Macros to View BoQ information |
