Tender For Special Repair /Replacement Of Asbestos Roof Sheets And Allied Wks In Bldg No E-110 Of Pine Offrs Mess Under Ge (South) Meerut Cantt
Tender Value
47.32 Lakhs
Estimated cost
Bid Submission
09 Jul 2026
1 days left
EMD
94640
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Meerut → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair /Replacement Of Asbestos Roof Sheets And Allied Wks In Bldg No E-110 Of Pine Offrs Mess Under Ge (South) Meerut Cantt
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified directed. |
| 2 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified directed. |
| 3 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified directed. |
| 4 | Dismantling timber framed work scantlings 40 sq. cm and over in section, in any position complete all as specified directed. |
| 5 | M&L Second class hard-wood in scantlings timber framed and fixed wrought complete all as specified directed. |
| 6 | Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with cresosote oil complete all as specified directed. |
| 7 | S&F Fe-290 (Gde E-165) mild steel Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats, nut bolts, MS plate etc complete all as specified directed. |
| 8 | Applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome complete all as specified directed. |
| 9 | Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets etc complete all as specified directed. |
| 10 | S&F aluminium anodised snap grid (Size of grid 605 x 605mm) frame work for false ceiling incl 2mm dia GI hanging wire etc. Complete all as specified and directed. |
| 11 | M&L for 4mm thick non asbesots fibre cement building boards fixed or laid/inserted to timber/GI/Aluminium framework with screws etc complete all as specified directed. |
| 12 | Demolition of Brickwork or stone/ boulder masonry, built in built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified directed. |
| 13 | M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified directed. |
| 14 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.complete all as specified directed. |
| 15 | M&L for applying 15mm thick rendering using ready mix plaster bags on brick or concrete surface of external/internal wall finished even and smooth. Note: contractor is required to deposite ready mix bags for 100% CA quantity to Engr-in-Charge with in 15 days of acceptance of contract. complete all as specified directed. |
| 16 | M&L of new plastered surfaces of wall and applying two coat of oil bound distemper incl 1 mm thick wall care putty. Complete all as specified and directed. |
| 17 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified directed. |
| 18 | M&L of old plastered surfaces of wall and applying two coat of oil bound distemper incl 1 mm thick wall care putty. Complete all as specified and directed. |
| 19 | S&F 1.00MM thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified directed. |
| 20 | S&F 110mm dia PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to walls etc complete all as specified directed. |
| 21 | S&F 110mm dia PVC (SWR) bends any radius. complete all as specified directed. |
| 22 | Taking down chowkats or frames exc 1.5 sq. m but n exc 4 sq m each (without taking off shutters from the frames) complete all as specified directed. |
| 23 | Taking down chowkats or frames not exc 1.5 sq. m each (without taking off shutters from the frames) complete all as specified directed. |
| 24 | S&F factory made single extruded WPC (wood polymer composite) solid door frames of chokhat of size 65x100mm comprising of virgin PVC Poymer of K VALUE 58-60 (Suspension grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC aolvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750kg/cum, screw withdrawal strength of 2200 N (face) & 1100 N (edge), minimum compressive strength of 58 N/mm², moduiles of elasticity 900 N/mm² and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified directed. |
| 25 | S&F factory made single extruded WPC (wood polymer composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibres (wood powder/rice husk/whear husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (face) & 900 N (dege), minimum compressive strength of 50 N(Face) & 900 N (edge) minimum compressive strength 50 N./sqmm, modulus of elasticity 850 N/sqmm and resistance to spread of flame of class A Category with property of being termite/borer proof, water/moisiture proof and fire retardant and fixing with stainless steel butt hinge of required size with necessary full body threaded star headed counter sunk SS Screws complete all as specified directed.Note: stainless steel butt hinge and necessary SS screws shall be paind separately) |
| 26 | S&F Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified directed. |
| 27 | S&F Aluminium handles 150mm size, cast type, anodised complete all as specified directed. |
| 28 | S&F in repair overall length of cover plate 150mm long Floor door stopper of aluminium alloy body & tongue, anodised, with hard drawn steel spring fixed complete all as specified directed. |
| 29 | S&F 100mm long stainless steel butt hinges. Complete all as specified and directed. |
| 30 | M&L for vitrified ceramic tiles light shade 10mm thick (square/rectangular) polished area of each tiles nexc 0.36 sqm in floors set and joined in neat cement slurry and pointed in white or .coloured cement to match and incl 15mm thick CM 1:6 screed bed or bedding layer of mortar for laying floor finishes incl dismantling of floor tiles. Complete all as specified and directed |
| 31 | M&L for vetrified ceramic tiles light shade 10mm thick (square/rectangular) polished area of each tiles nexc 0.36 sqm in skirting/dado set and joined in neat cement slurry and pointed in white or .coloured cement to match and incl 10mm thick CM 1:4 screed bed for skirting/dados incl dismantling of wall tiles. Complete all as specified and directed |
| 32 | S&F Coloured Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM(1:6) incl dismantling of tiles. complete all as specified directed. |
| 33 | S&F Coloured Glazed ceramic tiles in vertical surfaces 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick plaster in CM(1:4) on fair face of brick or concrete surface incl dismanting of tiles.complete all as specified directed. |
| 34 | Taking up or down 15mm bore of pipe steel tubing and connections, including cleaning for re-fixing or removal to store. Complete all as specified and directed. |
| 35 | S&F 20mm (outer diameter of pipes) 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified directed. |
| 36 | Cutting chases, pinning in, making good to facings where required and pointing in CM(1:3) to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in brick wall complete all as specified directed. |
| 37 | Taking up or down 20mm bore of pipe steel tubing and connections, including cleaning for re-fixing or removal to store. Complete all as specified and directed. |
| 38 | S&F 25mm (outer diameter of pipes) 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified directed. |
| 39 | S&F 25MM (outer diameter of pipes) PP-R Gate valves (brass insert) as per requirement of the site complete all as specified directed. |
| 40 | S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern & flush pipe) in closet seat cover complete all as specified directed. |
| 41 | S&F in repair Plastic water closet seat, black/white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified directed. |
| 42 | Supply and fixing in repair PVC valveless, syphonic action type, flushing cistern, 10 ltr capacity, low level, white, with inlet, ball valve, float and handle including brackets and PVC bend including connection to IWC/EWC and fixing on wall with brackets complete all as specified directed. |
| 43 | S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified directed. |
| 44 | S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified directed. |
| 45 | S&F in repairs 125mm size brass chromium plated shower rose with or without swivel joints any size including fixing to steel pipe or union. complete all as specified directed. |
| 46 | S&F in repair 20MM dia tubular towel rail , brass, chromium plated, fancy type, min 60 cm long between flanges fixed with and including CP brass screws, rawl plug etc complete all as specified and directed |
| 47 | Supply and fixing in repair 20 mm dia stainless steel curtain rods with wall thickness 1 mm including bracket holding and knob on ends as fixed in repairs complete all as specified directed. |
| 48 | S&F in repair 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified directed. |
| 49 | S&F in repair toilet paper holder, brass chromium plated, fixed to walls with chromium plated brass screws. Complete all as specified and as directed. |
| 50 | S&F in repair soap dish, chromium plated, fixed to plugs with chromium plated brass screws. Complete all as specfied and as directed. |
| 51 | S&F in repairs 40mm bore unplasticised PVC pipe of pressure rating 10 kg/Sqcm fixed complete to walls, ceiling or laid in floors complete all as specified and directed. |
| 52 | S&F in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood & fixed to wooden plugs with CP brass screws & cup washers etc complete all as specified directed. |
| 53 | Dismantling of water and removing to store capacity 1000 litres and S&F 1000 litres rotational mouded polyethylene three layer water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I incl 20mm bore ball brass valves, high pressure with polythene float and flynut complete screwed for iron pipe/PPR pipe or brass ferrule and fixed.Complete all as specified and directed. |
| 54 | S&F in repair wash hand basin Brass CP mixer for mixing hot & cold water screwed down for iron pipe with all fixing arrangement required for fixing complete all as specified directed. |
| 55 | S&F in repair Stop valves/angle valve 15 mm bore fancy type, CP with long shank & cup (conncelaed type), cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified directed. |
| 56 | S&F in repar Brass CP wall mixer 3 in 1 for mixing hot & cold water screwed down for iron pipe.with all fixing arrangement required complete all as specified directed. |
| 57 | S&F in repairs Vitreous China wash basin, white/coloured, flat back, size 550x400mm excluding taps, waste chain & plug & porcelain stopper but including brackets complete all as specified directed. |
| 58 | S&F aluminium door/ window/ventilator/partition shutters and frame, made out of extruded power coated aluminium sections weighing 0.55kg/m, with sliding or openable shutters including frame and necessary joining cleats, glazing clips, rubber packing, power coated aluminium snap beading, screws, channels etc. Complete and also including the following powder coated aluminium fittings such as cobra hinges, butt hinges, tower bolts, hook & eyes, peg stay and handles connected items wtih and including star lock (star lock used for each sliding glass shutter). complete all as specified and directed. Notes:- (i) Minimum thickness of powder coating shall be not less than 15 micron for widows & ventilators and 25 microns for doors & partions. (ii) Incl Rubber beading. (iii) Design of door, window and ventilator shutters and sections to be used in their fabrications shall be as approved by the Engineer-in-Charge/GE. (iv) Incl 4.00mm thick glass for door/windows/venitlator/partions. (v) Incl 4mm thick frosed glass used for ventilator. (vi) Incl Galvanised mild steel wire cloth, 0.56 nominal dia of wire & average width of aperture 1.18mm for gauged shutter. |
| 59 | S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe 290-0 Gde E-165 including all fixing arrangement required and complete all as specified directed. |
| 60 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified directed. |
| 61 | M&L Cement concrete type D-2, 1:4:8 (using 40mm graded agg) as in foundations, filling and mass concrete complete all as specified directed. |
| 62 | Demolition and breaking up of drain pipe salt glazed stoneware of 150mm bore set in cement mortar complete all as specified and directed. |
| 63 | M & L 150mm dia Salt-glazed stoneware drain pipes laid in trenches and jointed complete all as specified directed. |
| 64 | M & L Concrete bed to drain pipes including packing under and completely surrounding pipes with cement concrete 1:3:6 type C-2 after they are laid and tested; in for 150mm dia pipe. complete all as specified directed. |
| 65 | M&L, Brickwork with sewer bricks straight or curved on plan exc 6 m mean radius for man-holes/ septictank/ soakwell etc. in sewer works in cm (1:4), complete all as specified directed. |
| 66 | M&L, Brickwork with sewer bricks (except bricks), straight or curved on plan exc 6 m mean radius for man-holes/ septictank/ soakwell etc. in sewer works in cm (1:4), complete all as specified directed. |
| 67 | M&L, Rendering 15mm thick on fair faces of brick work or concrete surfaces finished even and smooth (without using extra lime or cement) in cm (1:4) complete all as specified and directed |
| 68 | Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified directed. |
| 69 | M&L75mm thick Cement concrete type C- 2, 1:3:6 (40mm graded aggregate) as in plinth protection etc complete all as specified directed. |
| 70 | Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound type A. complete all as specified directed. |
| 71 | Demolition of RCC Concrete of any description and in any position not otherwise specifically provided for complete all as specified directed. |
| 72 | M & L RCC (1:2:4) Type B-1 using (20mm graded stone aggregate) as in precast cover slabs for man holes/Soakage Well/Septic Tank, set in cement mortar 1:6 including necessary form work, placing in desired position, complete all as specified and directed. |
| 73 | M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified directed. |
| 74 | M&L 18-20mm thick Granite (of any tpe) work (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms and like in CM(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick Screed in CM (1:6) complete all as specified directed. |
| 75 | Taking down carefully any type of battens or conduit point wiring with or except conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators, tube light fittings etc removing material from site and making good disturbed surfaces area. complete all as specified directed. |
| 76 | Taking down unsv distribution board and sheet metal enclosureof any type / size complete all as specified and directed . |
| 77 | Taking out old unsv LT cable any size complete all as specified and directed. |
| 78 | Taking out old unsv sub main wiring of any size complete all as specified and directed. |
| 79 | M&L for point wiring using 1.50 sqmm size, PVC insulated, unsheathed 1100 volts grade single core multi-stranded (FRLS-H) copper conductor cable in proper colour coding drawn into concealed conduit metallic rigid PVC conduit medium grade (not less than 20 mm dia) with and including its all necessary fittings and accessories fixed concealed, sunk cast iron or 1.6 mm thick pressed steel terminal box for mounting fittings i.e, modular switch / sockets incl cover plate with frame and glossy surface sheet top cover fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.50 sqmm size stranded FRLS-H copper conductor cable as in earth wire and connecting all metal parts to common earth dolly incl cutting and chases pinning in for concealed conduit wiring and making good of disturbed surface complete all as specified and directed for the following: -.(a) One light point / bell point controlled by one, one way one module modular switch 05 / 06 Amps all as specified and directed.. |
| 80 | All as per item No 79.00 here-in-before but One fan point controlled by one, one way one modular switch 05 / 06 Amps all as specified and directed.. |
| 81 | All as per item No 79.00 here-in-before butOne 3 pin, 05 / 06 Amps 2 module modular socket outlet point on independent board controlled by one, one way one module 05 / 06 Amps modular switch all as specified and directed.. |
| 82 | All as per item No 79.00 here-in-before but One 3 pin, 05 / 06 Amps 2 module modular socket outlet point on same board controlled by one, one way one module 05 / 06 Amps modular switch all as specified and directed.. |
| 83 | All as per item No 79.00 here-in-before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps socket outlet point on independent board all as specified and directed.. |
| 84 | Supply & fixing modular switch 1 way 06A 1 module 240 volts complete all as specified directed. |
| 85 | Supply & fixing 2 module modular socket outlet 3 pin, 05 / 06 Amps 240 volts complete all as specified directed. |
| 86 | Supply & fixing modular switch 15 / 16 Amps single pole, one way 240 volts AC complete all as specified directed. |
| 87 | Supply & fixing of modular socket outlet 3 pin 6 / 16 Amps 2/3 pin combined 2 module complete all as specified directed. |
| 88 | Supply and fixing door bell ding dong type , 240 volts AC complete all as specified directed. |
| 89 | Supply and fixing modular bell push, 6 amps 1 module, 240 volts AC complete all as specified directed. |
| 90 | Supply and fixing decorative wall light fitting wall mounted type including LED lamp 9 Watt- 01 No. complete all as specified directed. |
| 91 | Supply and fix decorative LED Batten 20 Watt, 4 feet, polycarbonate housing integtrated type complete with all accessories and fixing material complete all as specified directed. |
| 92 | Supply and fix decorative LED Batten 10 Watt. 2 feet polycarbonate housing integtrated type complete with all accessories and fixing material complete all as specified directed. |
| 93 | Supply & fixing lamp holder (Angular / Straight), insulated body, with back PVC plate complete all as specified and directed. |
| 94 | Supply and fixing LED back lit Bulk Head luminaires surface mounted, made up of aluminium housing with diffuser 10 watt and IP 66 protection complete all as specified & directed. |
| 95 | Supply and fixing LED building security light fitting 1x35 Watt luminaries with die cast aluminium housing comprising epoxy poweder coated enclosed with glass cover in frame with high power LED white lamp of capacity 35 watt including brackets of 32 mm dia GI pipe medium grade upto 0.6 mtr long bend to required shape including flat iron clamps- 02 Nos with suitable size of nuts and bolts including grouted in wall complete all as specified and directed., |
| 96 | Supply and fixing recess mounting LED 2'X2' luminaire 36W with deep drawn CRCA housing efficacy of 120 lm/W. Designed foroptimal lighting with comfortableexperience through it classic design & glare free soft illumination including all acessories complete all as specified directed. |
| 97 | Supply & fixing of ceiling rose, 3 phase/PVC/polycarbonate isolated body complete all as specified directed. |
| 98 | Supply and fixing ceiling fans complete with blades, down rods, step type electronic regulator suitable for BLDC Fan upto 60 watt and ccessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor ( BLDC). complete all as specified directed. Note :- Old unsv ceiling fan of any sweep shall be deposited at MES store yard. |
| 99 | Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 8 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as specified directed. |
| 100 | S&F (in repair) for sub main wiring with 10Sqmm nominal cross sectional area, four single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable with and including continuous earth wire of size 10Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of suitable size, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed. Note:- One meter of conduit along with 4x10 sq mm wire and one 6.0 sq mm earth shall be measured as one unit length. |
| 101 | S&F (in repair) for sub main wiring with 4 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable with and including continuous earth wire of size 4 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of suitable size, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed. Note:- One meter of conduit along with 2x4 sq mm wire and 1x4 sq mm earth shall be measured as one unit length. |
| 102 | Supply and fixing Vertical Loadline sheet metal enclosure double door, Triple pole and neutral (TP&N vertical loadline) AC, 415 volts, 04 way, with 200 Amps rated copper bus bar and IP - 43 & IK 09 protection, with the inbuilt provison for fixing and including 1 No MCCB 3 Pole160Amps 36 KA, 415 volts and alongwith provision for 12 Nos MCB's inside of DB, with metal door and flush to wall including grouting and cutting in existing wall and making good disturbed surface with two coats of white / colour washing / distempering etc to match the existing complete all as specified and directed. |
| 103 | Supply and fixing MCB SP, AC, 240 volts of 06 to 40 Amps, B curve, 10 kA, complete all as specified and directed. |
| 104 | Supply & fixing MCB SPN, AC, 240 volts of 40 to 63 Amps, B curve, 10 kA, complete all as specified and directed. |
| 105 | Supply, laying commissioning, testing of XLPE under ground LT cable 1100 volts grade of size 25 Sqmm 3.5 core armoured, PVC sheathed with aluminium conductor heavy duty laid in trenches, fixing on wall, under road crossing through protection pipe etc complete all as specified and directed. |
| 106 | Supply / laying and fixing 40mm bore galvanised steel tubes with all fittings, light grade, laid in trenches for cable protection complete all as specified and directed. |
| 107 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 M depth in soft / loose soil and gating out in soft / loose soil complete all as specified and directed. |
| 108 | M&L for washed river dry sand cushioning in trenches 80mm thick before laying the cable and 150mm thick after laying the cable including spreading levelling andhard punning complete all as specified directed. |
| 109 | Material and labour for contineous brick edging with width equal to the depth of the brick of whole sub class 'B' bricks laid on edge complete all as specified and directed. |
| 110 | Returning, filling in, including spreading, leveling, watering and well ramming in layers n. exc. 25cm thick in soft / loose soil complete all as specified and directed. |
| 111 | Removing surplus excavated materials n.exc. 50 Mtr and depositing where directed at a level n. exc. 1.5 Mtr above the starting point complete all as specified and directed. |
| 112 | Supply and fixing light duty Exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230 V, 50 Hz, Rpm 1200, copper winding and fixing accessories 230 Volt and 300mm sweep with and including making hole of suitable size in the wall, plastering the surface making good damaged portion with plaster in CM 1:4 incl recolouring complete all as specified and directed. Note :- Old unsv Exhaust fan of any sweep shall be deposited at MES store yard. |
| 113 | Supply and fixing industrial type SPN enclosure with a two pin and earth plug and socket complete with and including 20 Amps MCB, single pole, AC 240 volts and flush to wall including all cuttings & chases etc on wall and making good including two coats of white/colour washing/distempering etc to match with existing disturbed surfaces complete all as specified directed. |
| 114 | Supply and fix electric water heatervertical storage type 25 Ltrscapacity having stainless steel steel inner tank with glass enamelled coating BEE 5 star rating ,closed/ ventilated type 240 volt ,glass coated heating element with digital display complete with element 2.0 KW and all accessories including fixing arrgement with syitable size of fastner, nuts,bolts and waster etc. complete all as specified directed.Note :- Old unsv geyster of any capacity shall be deposited at MES store yard. |
| 115 | Material and labour for earthing with galvanised steel earth plate electrided 600 X 600 X 6 mm thick buried in ground (earth pit not less than 2.25 mtr depth below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to GI earth lead wire 4.0 mm dia by means of bolts nuts chek nuts and washers of galvanized iron or steel earth lead wire protected by and including 15 mm dia GI pipe medium grade pipe for protection and 20 mm dia GI pipe (medium grade) for watering and connected to control switch as directed including necessary earth work as in soft/loose soil, concrete pit in PCC (1:3:6) type c1, pre cast RCC 1:1:5:3) type A1 cover slab duly reinforced with 8mm dia TMT bar @ 100 mm CC both way and 2 No, lifting handle made of 12mm dia TMT bar and set in cement mortor (1:4), funnel wire nesh, char-coal or coke and salt in alternate layer, testing etc complete all as specifide in electrical plate No. 3 of SSR Pt-1 complete all as specified directed.Note:- (i) If the desired earth resistance is not found within permissible limit, shall be redone by contractor at no extra cost.(ii) Cost of GI wire 4 Sqmm and 15mm dia GI pipe medium grade upto 7.5 m is included in the rate quoted for this item. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayJul 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender