|
| 1 | M&L in Repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) complete all as specified and directed |
| 2 | M&L for Preparing existing blacktop surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags or by hand compressor to remove all loose dirt etc.complete all as specified and directed. |
| 3 | M&L for applying evenly a priming/tack coat with bituminous primer at 5 kg per 10 sq metre of paving bitumen complete all as specified and directed. |
| 4 | M&L for laying bituminous premix semi dense asphaltic concrete with 5.5% binder content 40mm consolidated thickness by weight of total mix, rolled and compacted to required camber and gradient complete using paving bitumen (VG-30) any penetration (SDAC shall be laid with mechanical paver and rolled with 8-10 Ton tandom power roller) complete all as specified and directed. Note :- Job Mix formula as per MORTH Specification shall be got done from the accredited Govt's approved lab and cost there on shall be born by the contractor. Bitumen content indicated in description shall be minimum however actual requirement of bitumen binder in plus side shall be as per Job Mix formula. Work shall be executed after approval of Job Mix formula by GE. |
| 5 | M&L for premixed bituminous macadam with 4% binder paving bitumen (VG-30) content by wt. of total mix laid/ rolled and compacted to required gradient and camber consolidated thickness 75 mm thickness or less, and rolled with power roller 8 to 10 Ton complete all as specified and directed. Note :- Job Mix formula as per MORTH Specification shall be got done from the accredited Govt's approved lab and cost there on shall be born by the contractor. Bitumen content indicated in description shall be minimum however actual requirement of bitumen binder in plus side shall be as per Job Mix formula. Work shall be executed after approval of Job Mix formula by GE. |
| 6 | Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions. |
| 7 | Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed |
| 8 | Supply and fixing metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed |
| 9 | M & L for preparing bituminous surfaces of road and marking 2 mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed. |
| 10 | S&F in repair Road safety poly carbonate convex mirror 100cm dia encased in ABS materials, orange colour for outdoor installation including 3.0m long and 75mm dia MS pipe as stand, fixed to ABS frame with proper fixing arrangement (Stand painting with two coats of synthetic enamel paint over one coat of red oxide primer fixed on ground in PCC block of size 45x45x50cm of PCC 1:2:4 type B-1 (Using 20mm graded crushed stone aggregate) and including necessary excavation earth work and removal of soil to a distance n. exc. 50m complete all as specified and as directed. |
| 11 | S&F in repair plastic speed bumb/ speed braker of PVC material speed breaker of size L 750mmxW 250 mmxH 75 mm, High-Impact Resistant Polypropylene / Recycled Thermoplastic, load bearing capacity upto 40 tons, color Yellow & Black (Standard) with Reflective Tape, UV-stabilized, corrosion-proof, weight 6 kg/meter, fixing method Heavy-duty anchor bolts of suitable size embedded in epoxy as per manufacturer’s instructions complete all as specified and directed.Note:- Holes in road shall be drilled with drill machine and necessary cleaning of hole shall be done with blower prior to install the road braker. Please Enable Macros to View BoQ information |
