Tender For Repair To Boundary Wall And Fencing, Hardstanding And Associated Works At Birpur And Main Ratnuchak Mil Stn Under Ge Kaluchak
Tender Value
69.96 Lakhs
Estimated cost
Bid Submission
16 Jul 2026
9 days left
EMD
1.30 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Boundary Wall And Fencing, Hardstanding And Associated Works At Birpur And Main Ratnuchak Mil Stn Under Ge Kaluchak
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work or stone masonry built in cement mortar including all quoins arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified and directed by Engr-in-Charge |
| 2 | Material and labour for brickwork with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM 1:4 as in walls etc. complete all as specified and directed. |
| 3 | Material and labour for brickwork using old bricks obtained from demolition straight or curved on plan exc 6 m mean radius built in CM 1:4 as in walls etc. using old bricks obtained from demolition complete all as specified and directed. |
| 4 | Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubbing down with water etc, and removing unserviceable material outside cantt area, complete all as specified and directed. |
| 5 | Material and labour for 15 mm thick rendering on fair faces of brick work or concrete surfaces of walls etc in CM 1:4 including finished the surfaces even and smooth without using extra cement, complete all as specified and directed. |
| 6 | Material and labour for 15 mm thick rendering other than fair faces of brick work of walls etc in CM 1:4 including finished the surfaces even and smooth without using extra cement, complete all as specified and directed. |
| 7 | Material and labour for TMT bars 10mm dia and over cut to length, bent to shape required including cranking and bending spirally for hopping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.90mm dia) or securing with clips complete all as specified and directed. |
| 8 | As per srl item No 07 above but 5 to 10 mm dia as in stirrups, spacer etc complete all as specified and directed. |
| 9 | Supply & fixed in repairs Galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc complete all as specified and directed. |
| 10 | Restraining and resecuring Galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings including making good staples etc., complete all as specified and directed. |
| 11 | Use and waste of form work to sides of pillars, posts, struts, piers, columns and stanchions etc, square, ractangular or polygonal, to obtain rough finished surface of flat concrete complete all as specified and as directed. |
| 12 | Reinforced cement concrete M-25 design mix (using 20 mm graded crushed stone aggregate) as in columns, pillars, piers, posts and struts, complete all as specified and as directed by Engr-in-Charge. |
| 13 | Use and waste of steel form work to sides and soffits of floor or roof beams, haunchings, girders, bressummers, lintels, cantilevers, shelves including SllP~portsloverhans, etc. also splays between floors andbeams, etc. complete. for rough finished surfacescomplete all as specified and directed. |
| 14 | Reinforced cement concrete M-25 design mix (using 20 mm graded crushed stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span, complete all as specified and as directed by Engr-in-Charge. |
| 15 | Demolition of reinforced cement concrete of any description not otherwise specifically provided for (reiforcement cut to facilitate demolition) complete complete all as specified and directed. |
| 16 | Concertina coil of 610 mm diameter made out of 2.6mm dia spring steel wire230 gm/m2 (Min) dipped with corosion preventive fluid (rusilo 901) including white colour each coil having a minimum 50 turns(circles) and an average weight of not less than 8.57 Kg including handle and spike at both end of coil erected in position on tip of mild steel angle by fixing with GI clip for securing including necessary welding the MS section and as per manufactures instruction complete as sepcified |
| 17 | Dismantling of concentina coil fencing any type complete all as specified and directed |
| 18 | Plain cement concrete 1:2:4, type B-0 (using 12.5 mm graded crushed stone aggregates) as in steps, seismic and other similar bands, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, cills, lintels upto 1.50 metre clear span, copings etc. and in similar works including weathering, slightly rounded or chamfered angles and throating and necessary form works, all as specified and directed by Engr-in-Charge |
| 19 | Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work confirming to Fe 410-W (Gde-E- 250) complete all as specified and directed |
| 20 | Preparation new plastered surfaces of walls and applying two coat of cement base paint over one coat of primer complete all as specified and directed. |
| 21 | Dismantling mild steel work of any description not otherwise provided for complete all as specified and as directed by Engineer-in-Charge. |
| 22 | Dismantling posts or structs embeded in concrete (wood steel or RCC) any section inclduing taking out embeded complete all as specified and directed. |
| 23 | Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165,complete all as specified and as directed by Engr-in-Charge. |
| 24 | Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or othercovering. Doors, etc. to beprepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete confirming to Fe 290 (Grade E -165 ) complete all as specified and directed. |
| 25 | Material and labour cement concrete type C-2 (1:3:6) 40mm graded aggregate) in foundation, filling and mass concrete complete all as specified and directed. |
| 26 | Mild steel, plain, 1.25 mm thick black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required, complete all as specified and as directed. |
| 27 | S&F 12 mm dia Mild screw bolts machine made) with hexagonal or square heads at one end and screwed the other, or screwed on both ends each screwed end to be fitted with washers and one hexagonal or square nut but length of bolt exc 10cm but n exc 15cm long complete all as specified and as directed. |
| 28 | Fixing only chain link fencing as in repairs including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed. |
| 29 | Supply only Chain link MS galvanisd fencing, any size or type wieght n exc 4.00 kg per Sqm complete all as specified and directed. |
| 30 | S&F for 10 mm dia mild steel round bars as in chain link fencing, cut to length, bent to shape etc including necessary welding etc complete all as specified and directed. |
| 31 | Excavation in post holes (or similar holes) each n exc 0.5 Cum getting out , returning , filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm complete all as specified and as directed. |
| 32 | Material and labour for two coats synthetic enamel paint over a coat of red oxide primer on newly steel surfaces complete all as specified and as directed. |
| 33 | Demolition of stone slabs and tiles of any description or thickness in floors etc laid, bedded and painted in any mortar complete all as specified and as directed. |
| 34 | Material and labour for providing 25mm thick chequered cement concrete tiles of diferent colour & shape( factory made) as per requirement set, jointed and pointed with grey cement and pigments to match colour of tile ,laid over screed bed or bedding layer complete all as specified and directed.Note :Bedding layer shall be measured and paid separately . |
| 35 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed. |
| 36 | Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed. |
| 37 | Material and labour for PCC 1:4:8 type D-2( 40 mm graded aggregate ) as in sub base to flooring 75 mm thick complete all as specified and as directed. |
| 38 | Material and labour for PCC 1:2:4 type B-2( 40 mm graded aggregate ) as in hard standing /paths etc complete 100 mm thick laid in alternate panels including all formwork finished even & fair without using extra cement complete all as specified and directed. |
| 39 | Material and labour for PCC 1:2:4 type B-1( 20 mm graded aggregate ) as in floors, courts etc complete 50 mm thick finished even & smooth without using extra cement complete all as specified and directed. |
| 40 | Material and labour for glass floor dividing strip, 3 mm thick and 38 mm wide, complete all as specified |
| 41 | Material and labour for PCC 1:3:6 C-1 (using 20mm graded crushed stone aggregate) as in plinth protection, path ( 75 mm thick ) finished even and fair all as specified. |
| 42 | Demolition of concrete of any description and in any position not otherwise specifically provided complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysJul 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender