|
| 1 | Taking down cement plaster of any description on brick wall ceiling and concrete surface etc including racking out joints,hacking for keys scrubbing to a distance not exceeding 100 mtr depoisting and spreadingcomplete all as specified and as directed by Engr-in-Charge. |
| 2 | Demolition of Brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles complete all as specified and as directed by Engr-in-Charge. |
| 3 | Except Bricks work with old size bricks, using old serviceable bricks, as retrieved from dismantling of brick work under respective item, after removing mortar from and cleaning bricks; straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed by Engr-in-Charge. |
| 4 | M&L Brick work with old size sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6, complete all as specified and as directed by Engr-in-Charge. |
| 5 | M&L for making good the broken surface of chajja /facia/roof projection and the simalr work by providing PCC 1:2:4 type B-0 using crused stone aggregate, or providing 15mm thick cement plaster in CM 1:3 as per site Requirment as patchesand including necessary formwork scafolding required height of building n-exc 9.50mtr complete all as specified and directed by E-in-Charge. |
| 6 | Rendering 10 mm thick on fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) on walls in cement mortar (1:6), complete all as specified and directed by Engr-in-charge. |
| 7 | Rendering 15 mm thick on other than fair faces of brick work/stone wall or concrete surfaces,(without using extra cement) on walls in cement mortar (1:4), including mixing of liquid water proofing admixture as per manufacturer's instructions complete all as specified and directed by Engr-in-charge.Note: Supply only liquid water proofing admixture shall be measured and paid seperately under relevant item of this BOQ |
| 8 | Supply only Liquid Water Proofing admixture complete all as specified and directed by Engineer-in-Charge. |
| 9 | M&L Complete removal of old existing whrerein the previous decoration has been completly removed from plastered surface of walls by using sanders brushing machine and proper washing of walls with water.over one coat of primer and applying two coats of exterior quality paint in camoflaging pattern Make: Asian Ultima protek/ Nerolac excel Excel top guard / Berger Paint weather Coat long life with offering 10 yrs gurantee (with RGB value) in any tint on melbow width like roof projection, facia, Chhajja etc) all as per manufacturer's instructions and complete all as specified and directed by Engineer-in-Charge as per Pattern approved by USER's for the Comflage pattern.Note: 1.-Painting work up to 30 Mtr Height 2. All gaps and undulation surfaces filled with putty then make surfaces smooth without any Extra Cast. |
| 10 | Preparation of old surfaces of walls by brooming down with steel wire brushes, scrapping down smoke soot moulds moss and efflorescence salts washing, rubbing down and cleaning oil greasy spots etc and applying one coat of distempering with oil emulsion distemper white or any tinted on ceiling / walls, normal or camoufage pattern filling gaps by putty after washing rubbing down and stopping of distermpered surfaces, complete all as specified and directed by Engr-in-charge. |
| 11 | M&L for prepration of old steel surface of any discription over 10 cm width or girth not otherwise and applying One coat of synthetic enamel paint complete all as specified and as directed by Engr-in-Charge. |
| 12 | Preparation of newly plastered surfaces two Coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50gms/litre, of approved manufacturer, of required shade and colour complete over a coate of primer, as per manufacturer's specification over a complete all as specified and directed by Engr-in-charge. |
| 13 | M&L Applying 2 mm thick exterior wall care putty on newly plastered surface of wall etc complete all as spd and directed by Engr in charge |
| 14 | M&L Preparation of newly plastered surfaces of walls upto 30 mtr height including overhead water tank in E/M installation applying one coat primer and two coats of exterior quality paint in camoflaging pattern Make: Asian Ultima protek/ Nerolac excel Excel top guard / Berger Paint weather Coat long life offering ten years guarantee (with RGB value in SIGMA Pattern) in any tint on melbow width like roof projection, facia, Chhajja etc) all as per manufacturer's instructions and complete all as specified and directed by Engineer-in-Charge as per Pattern approved by USER's for the Comflage pattern. |
| 15 | Note:- 1-All the arrangements scaffolding ladder saftey harness etc will be made by contractor free of cost & department will have no role in this Arrangements but work execute as per direction by Engr-in Charge and Approved by GE. And the work will be done proper manner & floor height of floor is upto to 30 Mtr.2-Sample approval has to be taken before starting the work and matrials has to be kept in store.3- Complete removal, all treatments will be removed down to plaster surface .4. In Complete removal case - 2nd Coat paint will be applied after 8 hours of completion of 1st coat painting or after the surface gets dried)5- Any Misc items reqd viz. colours, putty, Machenically Equipment which are required on ground etc in the work should be deemed incl in the respective items of works and nothing extra shall be paid on the account. |
| 16 | SCHEDULE 'A' PART-II (Schedule of credit) Credit amount of Rs (Refer schedule of credit) for retrieved material mentioned in Sch 'A' Part-II of Tender documents in PDF form will be deducted offline during acceptance of tender of lowest bidder. Please Enable Macros to View BoQ information |
