|
| 1 | Taking down and re-fixing of shutters of any description exc 1 sqm but not exc 2 sqm each in same opening after securing or easing & adjusting complete all as specified & directed. |
| 2 | Taking down chowkats or frame exc. 1.5 Sqm and n exc 4 Square metre with shutters, without taking off shutters from the frame, complete all as specified and directed. |
| 3 | Taking down shutters of any description exc 1 sqm but n.exc 2 sqm and removing to store complete all as specified and directed. |
| 4 | preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 5 | Two coats of synthetic enameled paint on steel and iron surfaces over one coat of red oxide primer on surfaces over 10 cm width or girth including preparation of new surfaces complete all as specified & directed. |
| 6 | Preparation of old steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 7 | Preparation of old wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 8 | Factory made pressed steel frames of profile width 125mm x 60mm fabricated from 1.25 mm thick sheet, for doors with one or more rebate including necessary fixing lugs, hinges, lock strike plate, etc. & one shop coat of primer, including filling of chowkhat with PCC 1:3:6 complete all as specified and directed. |
| 9 | Factory made pressed steel frames of profile width 105mm x 60mm fabricated from 1.25 mm thick sheet, for doors with one or more rebate including necessary fixing lugs, hinges, lock strike plate, etc. & one shop coat of primer, including filling of chowkhat with PCC 1:3:6 complete all as specified and directed. |
| 10 | Factory made second class hard wood 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, all as specified and directed. |
| 11 | Glazed and gauged skeleton shutter (Factory made) 30mm thick of second class hard wood open rebated & prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut & mitred beads for securing glass etc including priming coat. Size of members of shutters as specified in SSR Part I Section 8, clause 8.20 (a) including Kiln seasoned and chemically pressure treated,complete all as specified & directed. |
| 12 | 150 mm size aluminium , barrel tower bolt of extruded section and complete all as specified and directed. |
| 13 | D' type, 150mm Extruded aluminium alloy handle fabricated type, complete all as specified and directed. |
| 14 | Aluminum alloy, anodized, sliding door bolt 250mm long hasp , staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed complete all as specified and directed. |
| 15 | 300mm mild steel ordinary rat tail rod pattern spring including roller and roller plate, including welding on chowkhat complete all as specified and directed. |
| 16 | 25mm dia stainless steel curtain rod including fixing fancy types brackets, stops, rollers etc., as in repairs complete all as specified and directed. |
| 17 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviveable tiles to store and rubbish off the premises complete all as specified and directed |
| 18 | Demolition of cement concrete unreinforced in ground floors, kota stone, granite flooring, tiles flooring and pavings not exceeding 15cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish all as specified & directed by Engineer-in-charge. |
| 19 | 100mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base etc, finished even and rough complete all as specified and directed. |
| 20 | 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in sub base finished fair and even without using extra cement, complete all as specified and directed. |
| 21 | Glazed coloured ceramic tiles in vertical surface 300mm x 450mm x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 10mm thick rendering in cement mortar 1:4, complete all as specified and directed. |
| 22 | Non skid, first quality ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area or each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 23 | Non skid, first quality ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area or each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 24 | Plain cement concrete 1:5:10 type E-2 using 40mm graded brick coarse aggregate as in sunken floor filling and mass concrete complete all as specified & directed. |
| 25 | Providing water proofing treatment to sunken floors as given below :-(a) Making fillet of size 50mm x 50mm at corner of slab and wall with PCC (1.2:4)(b) Cleaning the concrete surface by brushing & watering(c) 15 mm plaster in cement mortar (1:3) mixed with water proofing compound as per manufacturer's instructions after roughning and cleaning the surface(d) Curing the sunken portion with water minimum for 48 hours by ponding.(e)Applying 3mm thick APP membranne with bitumen by torch application to the treated sunken surface over a coat of primer on bottom surface of sunken and sides wall and as per manufacturers instructions.(f) Joints/Traps/WC/soil pipes shall be properly sealed with approved sealing compound (g) Ponding test will be carried out for 72 hours including temparory closing of spout(h) 40mm Gl pipe spout of required length shall be provided at bottom/suitable location in sunken portion before doing any other work this will include cutting and repair of required hole in brick work /RCC(j) Ponding test will be carried out for 72 hours including temparory closing of spoutNote Floor area shall be measured to made payment. |
| 26 | Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 27 | Brick work with sub class ‘B’ bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:6 complete all as specified & directed. |
| 28 | Brick work with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified & directed. |
| 29 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc or for shaft, wells, cesspits, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in soft and loose soil all as specified & directed by Engineer-in-Charge. |
| 30 | Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm depth , complete all as specified and directed. |
| 31 | Removal of excavated material to distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point , complete all as specified and directed. |
| 32 | Salt- glazed stoneware drain pipe grade ‘A’ 150mm bore, ISI marked, jointed with cement mortar, laid in trenches and tested including fittings of same grade complete all as specified and directed. |
| 33 | Plain cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate cast in situ in lintels up to 1.5 m clear span, cills, steps, seismic and other similar bands, hold fast, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, water through and the like including weathering, slightly rounded or chamfered angles and throating including use of form work (straigth or curved) complete all as specified & directed by Engineer-in-charge. - NOTE : (i) The unit rate include for use of form work (straight or curved). (ii) Reinforcement if any shall be measured and paid separately. |
| 34 | Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds , mitred /stopped ends etc complete all as specified & directed. |
| 35 | PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in surface channels, benching and drains complete all as specified and directed. |
| 36 | Plain cement concrete, type C-2, 1:3:6, using 40mm graded crushed stone aggregate as in bed to drain pipe including packing under pipes, haunching and tested after the pipe are laid, complete all as specified and directed. |
| 37 | Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed and removing rubbish etc. complete all as specified and directed. |
| 38 | Dubbing out average 20mm thick on irregular faces of walls, chajja, exposed reinforced surfaces of any description, in Cement and Sand mortar 1:4 (height upto 15 metre)complete all as specified and directed |
| 39 | Rendering 5mm thick in cement mortar 1:3 on fair faces of concrete surfaces as in ceilings , finished fair and smooth, complete all as specified and directed. |
| 40 | Rendering 15mm thick in Cement and Sand mortar 1:6 over fair faces of brick/concrete surfaces ,finished even and smooth without using extra cement, complete all as specified and directed. |
| 41 | Complete removal of existing wall treatement (internal / external surface) upto & including 4 storey building complete all as specified and directed. |
| 42 | Applying Wall care putty (average thickness 1-2mm as required for desired smoothness and leveling of surfaces in two or more layers) and sand papering for making the surfaces even and smooth complete all as specified and directed. |
| 43 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification, two or more coats on wall (smart periodical) complete all as specified and directed. |
| 44 | Two coats of oil bound distemper on ceiling surfaces over a caot of primer including preparation of new plastered surfaces complete all as specified and directed |
| 45 | Two coats of oil bound distemper on ceiling surfaces including preparation of old surfaces complete all as specified and directed. |
| 46 | HDPE floor trap 100mm bore, plain with grating including jointing to waste pipe jointed and setting/fixed in cement concrete type B-1, 1:2:4 , fixed as in repair complete all as specified and directed. |
| 47 | Wash hand basin, vitreous china, flat back, white of size 550 x 400 mm with CP waste coupling, angle brackets, PVC waste pipe, fixed as in repair complete all as specified and directed. |
| 48 | Vitreous china, wash down water closet pan, white, pedestal pattern with ‘P’ or ‘S’ trap, seat cover (excluding, flushing cistern and flush pipe), fixed as in repair complete all as specified and directed. |
| 49 | Vitreous china squatting pan, “Orissa” pattern of size 580mm x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe) fixed as in repair, complete all as specified & directed. |
| 50 | Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect, fixed as in repair complete all as specified and directed. |
| 51 | PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including 32mm dia PVC long bend, set with concrete and making good to floor, fixed in repair complete all as specified & directed. |
| 52 | PVC connections 15 mm size with PTMT nuts of length 450 mm , fixed as in repair complete all as specified and directed. |
| 53 | Towel rail 600mm long of CP fixed with and including chromium plated brass screws and wooden / plastic cleats (minimum weight 190gms), fixed as in repair complete all as specified and directed. |
| 54 | Towel ring of CP fixed with and including chromium plated brass screws and wooden / plastic cleats (minimum weight 90gms), fixed as in repair complete all as specified and directed. |
| 55 | Looking mirror of size 600mmx450mm of selected quality mounted on PVC frame and back fixed to wall with screw and rawl plugs, fixed as in repairs,complete all as specified and directed. |
| 56 | Taking up or down steel tubing and connections 15mm bore, complete all as specified and directed. |
| 57 | Taking up or down steel tubing and connections 20mm bore ,complete all as specified and directed. |
| 58 | Taking up or down steel tubing and connections 50mm bore ,complete all as specified and directed. |
| 59 | 15 mm bore Galvanized Steel tubes, medium grade including all fittings for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors, complete all as specified and directed. |
| 60 | 20 mm (outer dia) CPVC pipes, SDR 11 (surface / concealed) and Plain CPVC SDR 11 fittings, fittings on walls / ceiling or laying in floors including brass elbow, 'T' and all other necessary brass fittings like 'T' bend & socket for fixing with GI tube/ tap/ stop cock/ mixer, including Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3, cutting not exc 10 cm girth, in brick walls complete all as specified. |
| 61 | 25 mm bore Galvanized Steel tubes, medium grade including all fittings for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors , complete all as specified and directed. |
| 62 | PVC (SWR) rain water pipe, 50mm bore, single/ double socketed in any length with rubber ring joints, having minimum density 6 Kg/cm2 fixed to walls or laid in trenches/floor, complete all as specified and directed. |
| 63 | Bib tap brass, fancy type, long body with wall flange, standard chromium plated, cast copper alloy, screwed down for iron pipe or for brass ferrule, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed. |
| 64 | Angular stop cock, fancy type, cast copper alloy chromium plated, screwed down, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed. |
| 65 | Wall mixer system with L bend incl provn of over head shower, cast copper alloy , chromium plated screwed down for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair, complete all as specified and directed |
| 66 | Wash hand Basin brass Mixer of chromium plated hot and cold water screwed down for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair, complete all as specified and directed |
| 67 | corner glass shelf 300mm of 5.5mm thick glass with Chromium plated guard and railing with brass brackets, fixed as in repair complete all as specified and directed. |
| 68 | Cast copper alloy, chromium plated, fancy type shower rose with swivel joints 125mm dia including fixing to CPVC pipe 15mm bore, fixed as in repair complete all as specified and directed. |
| 69 | 25mm bore Union, brass to connect iron to polyethylene and fixed, fixed as in repairs complete all as specified and directed. |
| 70 | Cutting holes on superficial area n.exc 150 Sqcm and depth upto 30 centimeter into or through brick wall built in cement mortar/ RCC Chajjas, surfaces etc with core cutting method and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required after fixing of mild steel pipe sleeves in wall / slab as required complete all as specified and directed. |
| 71 | PVC (SWR) pipe, 110mm bore, Type B, single socketed in any length with rubber ring joints, fixed to walls or laid in floor, complete all as specified and directed. |
| 72 | PVC (SWR) rain water pipe, 110mm bore, single/ double socketed in any length with rubber ring joints, having minimum density 6 Kg/cm2 fixed to walls with MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc, fixed as in repair complete all as specified and directed. |
| 73 | 110 mm bore PVC (SWR) bends with acceess door complete, fixed as in repair all as specified and directed. |
| 74 | 110mm bore PVC (SWR) junction single, (Single T/ Y) equal or unequal, with access door fixed as in repair complete all as specified and directed. |
| 75 | 500 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered, white in colour, screwable lid, hoisted and fixed in position, including PTMT ball valve 20mm bore & PTMT tank nipple, etc, fixed as in repairs, complete all as specified and directed. |
| 76 | Demolition of stone slabs and tiles of any description or thickness in floors laid, bedded and pointed in any mortar including disposal of demolished material complete all as specified and directed. |
| 77 | Kota Stone Slab flooring, 20-25mm thick, best quality over and including cement screed bed 15mm thick in cement mortar 1:6, laid and jointed with grey cement slurry and pointed with grey cement mixed with pigment to match the shade of the slab including cutting, rubbing, grinding and polishing (Mirror finish) complete all as specified and directed. |
| 78 | All as per serial item No 77 hereinbefore but on steps/ tread/ riser/ skirting / vertical surfaces laid over and including 10mm screed layer in cement mortar 1:3, cutting, rubbing, grinding and polishing complete, all as specified. |
| 79 | 18-20mm thick green marble work (of any type table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in, set in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble compelte all as specified and directed. |
| 80 | 20mm thick green marble work (of any type table rubbed and polished) in floor over and including cement screed bed 15mm thick in cement mortar 1:6, laid and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust with admixture of pigment to match with shade of marble compelte all as specified and directed. |
| 81 | Sink made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 510mm x 430mm x 203mm bowl size 430mm x 380mm x 203mm fixed as in repair compelte all as specified and directed. |
| 82 | Plate rack of stainless steel of size 610mmx 914mm x 254mm with steel shelves and hanging arrangements for utensil, fixed as in repair complete all as specified and directed. Please Enable Macros to View BoQ information |
