Tender For Renovation And Redevelopment Of Chawani Sadan In Ward No.04
Tender Value
45 Lakhs
Estimated cost
Bid Submission
06 Jul 2026
0 days left
EMD
90000
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Patna → Bihar
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation And Redevelopment Of Chawani Sadan In Ward No.04
BOQ
| Sl. No. | Item Description |
| 1 | SSR-21004 Demolition of Brickwork or stone/boulder masonry |
| 2 | SSR-21018 Demolition of Roofs, floors (other than groundfloors), beams, staircases, landing, chajjas and similar suspended work |
| 3 | SSR-03033 Removing Demolised material exc. 1.50 km but n exc. 5 km and depositing where directed |
| 4 | SSR-03011 Surface dressing n exc 15 cm deep |
| 5 | SSR-03012 Site Clearance |
| 6 | SSR-03024 M&L Boring holes 3 m deep in soil for under-reamed piles and getting out and disposal of spoil to a distance of n exc. 50 m |
| 7 | SSR-03006 Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out |
| 8 | SSR-04053 M&L Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete in M20 grade |
| 9 | SSR-04058 M&L Columns, pillars, piers, posts and struts in M25 grade |
| 10 | SSR-04057 M&L Beams, cantilevers, bressummers, lintels over 1.5m span in M25 grade |
| 11 | SSR-04055 M&L Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like in M25 grade |
| 12 | SSR-05040 M&L Damp proof course to horizontal or vertical surfaces including necessary formwork |
| 13 | SSR-05004 M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in 1:4 cement mortar |
| 14 | SSR-14007 M&L Rendering 10mm thick on fair faces of brick work or concrete surfaces in cement Mortar 1:4 |
| 15 | SSR-13063 M&L Bricks, sub class B, laid flat, in floors, old size bricks |
| 16 | SSR-03019M&L Sand filling under floors or in foundations including watering and consolidation |
| 17 | SSR-04025 M&L Cement concrete in foundations, filling and mass concrete in cement concrete 1:2:4 |
| 18 | SSR-13086 M&L Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match |
| 19 | SSR-15014D M&L Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work |
| 20 | SSR-15014F M&L Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 21 | SSR-14016 3mm thick wall care putty on wall |
| 22 | 08158 M&L Providing and fixing factory made uPVC white color Sliding window Two track made of extruded profiles with wall thickness of 2.3mm (+- 0.2mm). Window profile with hollow section with multi chamber, Frame (60mm x 62mm). sash (42mm x 67mm). Sliding Interlock (One vertical length in each shutters) (45.5mm x 28mm). Glazing bead (24.5mmx 16mm) will he mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.. making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel frame (30mm x 21.5mm), Sash (30mm 18mm), profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mmlong fasteners. Hardware : [Touch Lock of zinc alloyed (white powder coated), steel roller system including 5mm thick glazing with selected quality glass,aluminum track on bottom rail for two track sliding frame, wool pine for Sliding sash and interlock. |
| 23 | 08172 Supply, and fixing 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and jointed at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickenss. The lock rail made up of 'H' section, a uPVC hollow section of size 100x30 mm and 2 mm ( + 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multichambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by insering horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as specified by the manufacturer and as per directions of Engineerin-charge. |
| 24 | SSR-10034 Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips |
| 25 | SSR-07004M&L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter |
| 26 | SSR-07006 M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) |
| 27 | SSR-07010 M&L Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. |
| 28 | SSR-07014 M&L Formwork to sides of pillars, posts, struts, piers, columns and stanchions |
| 29 | 19305 M&L One light point or one fan point controlled by one switch with cables 1.5 sq. mm size |
| 30 | SSR-19330 M&L One 3 pin 5 Amps socket outlet independent but below the switch board of light points in the same vertical plane, with cables, 1.5 sq. mm size |
| 31 | 19334 M&L One 3 pin socket outlet, 15 Amps, independent, with cables 4 sq. mm size |
| 32 | SSR-19334M&L One 3 pin socket outlet, 25 Amps, independent, with cables 6 sq. mm size |
| 33 | 19401M&L Fan step regulator, 120W - 2 module |
| 34 | 19522 M&L MCCB 3 Pole .415 V. fixed type, 25 to 100 Amps with breaking capacity 16 KA |
| 35 | 19433 M&L MCCBs 415V, 16KA, 4 Pole |
| 36 | 19389 M&L Modular switch 1 way 6A, 1 module |
| 37 | 19391 M&L Modular switch 1 way 16A, 1 module Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender