Tender For Provision Of Chain Link Fencing From Grade Separator Gate To Vijay Building Gate At Sma Varunapuri And Around Perimeter Wall Of installation Hansa (Tender Id No 2026_Mes_773057_1)
Tender Value
44 Lakhs
Estimated cost
Bid Submission
09 Jul 2026
0 days left
EMD
88000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
goa → Goa
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Chain Link Fencing From Grade Separator Gate To Vijay Building Gate At Sma Varunapuri And Around Perimeter Wall Of installation Hansa (Tender Id No 2026_Mes_773057_1)
BOQ
| Sl. No. | Item Description |
| 1 | Excavating post holes or similar holes each n exc. 0.5 cum getting out in soft/disintegrated rock including returning filling and removing surplus soft/disintegrated rock to a distance n exc. 50m & making good surface. |
| 2 | M&L Plain Cement Concrete Type C2 1:3:6 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete. |
| 3 | Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed. |
| 4 | S&F posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., & similar work conforming to Fe 290-0 Gde E-165 |
| 5 | M&l for TMT round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips complete all as specified. |
| 6 | S&F Mild steel bolts purpose n. exc 12mm made with exagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. Exc 30cm long complete all as specified and directed by Engineer-in-charge. |
| 7 | Supplied Chain link MS galvanisd fencing 75 x 75 mm mesh size of 4 mm thick , any size or type completed all as specified and directed by Engineer-in-Charge. |
| 8 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.including provission of binding wire completed all as specified and directed by Engineer-in-Charge. |
| 9 | S&F Galvanised. 2 strand, steel barbed wire 2.24mm diabarbed with 2mm dia barbs at 75mm spacings and strainingand fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (eachline wire to be measured) completed all as specified and directed by Engineer-in-Charge. |
| 10 | S&F of steel galvanised punched type concertina coil 1050mm dia when stretched with 255 nos of clip with weight 15.6Kg/coil and average coverage area is 6.00RM per coil. |
| 11 | M&L for two coat of synthetic enamel paint to steel surfaces over a coat primer including preparation of new surfaces complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayJul 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender