|
| 1 | Taking down chowkats or frames with shutter (without taking off shutter from the frame) n. exc 1.5 sqm each including cutting holes for taking out hold fast or dismantling brick work and removing from site complete all as specified and directed. |
| 2 | Demolition of brick work or stone/boulder masonry , built in cement mortar or cement lime mortar including all quoins, arches & pillars etc of any description and in any position and removing unserviceable material from work site to outside defence premises complete all as specified and directed |
| 3 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided and including removing from site to a distance n exc 500 mtrs , complete all as specified and as directed. |
| 4 | Excavating in trenches, n. exc 1.5 m wide and n. exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n. exc 1.5 m in depth and getting out in any type of soil complete all as specified and directed |
| 5 | Returning , filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm complete all as specified and directed. |
| 6 | Removing excavated material to a distance n.exc 50 m & depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed .. |
| 7 | M&L for plain cement concrete 1:4:8, type D2 (using 40mm graded crushed stone aggregates) as in foundation, filling & mass concrete complete all as specified and directed. |
| 8 | M&L for reinforced cement concrete 1:2:4,type B-1 (using 20mm graded crushed stone aggregates) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed . |
| 9 | M&L for reinforced cement concrete 1:2:4,type B-1 (using 20mm graded crushed stone aggregates) as in columns, pillars, piers, posts and struts complete all as specified and directed. |
| 10 | M&L for reinforced cement concrete 1:2:4,type B-1 (using 20mm graded crushed stone aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies complete all as specified and directed. |
| 11 | M&L for Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups , spacers and binders including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 12 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for column, hooking end and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed . |
| 13 | M&L for use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of concrete foundation and plinth beams and similar work for fair finished concrete surfaces complete all as specified and directed. |
| 14 | M&L for use and waste of form work to softfits of suspended slabs such as roof slabs , floor slabs , landings and similar work, not exceeding 200mm thick (Horizontal or sloping) for rough finished surfaces of concrete complete all as specified and directed. |
| 15 | M&L for use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed |
| 16 | M&L for use and waste of formwork to edges of concrete flats, treads, breaks in floors,window cills, concrete railings, openings in concrete walls, floor and roofs, n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n. exc 20cm wide for rough finished surface complete all as specified and directed . |
| 17 | M&L for brick work with fly ash bricks using old size bricks, straight or curved on plan exceeding exc 6 metre mean radius, built in cement mortar 1:6 complete all as specified and directed . |
| 18 | M&L for rendering 15mm thick in cement mortar 1:6 on brick work or concrete surfaces, surface finished even and smooth without using extra cement complete all s specified and directed. |
| 19 | M&L for rendering 15mm thick in cement mortar 1:4 on brick work or concrete surface, surface finished even and smooth without using extra cement complete all as specified and directed. |
| 20 | M&L for rendering 5 mm thick in cement mortar 1:3 on ceiling, surface finished even and smooth without using extra cement complete all as specified and directed. |
| 21 | M&L for hard core of gauge not exceeding 63mm using broken bricks, deposited, spread and leveled in layers not exc 15cm thick, watered and rolled/rammed to a true surfaces complete all as specified and directed . |
| 22 | M&L for 75mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in sub base, finishing surfaces even and fair complete all as specified and directed. |
| 23 | M&L for 25 mm thick plain cement concrete 1:2:4, type B-0, (using 12.5 mm graded crushed stone aggregate) as in sub base/ levelling course of floors, finished even and fair complete all as specified and directed. |
| 24 | M&L for 7 to 8mm thick non skid coloured ceramic tiles (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and poined in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed in cement motar 1:6 complete all as specified and directed. |
| 25 | M&L for glazed ceramic coloured tiles,300x600x7 mm / 300x450x7 mm thick, as in vertical surfaces, set and jointed in neat cement slurry and pointed in white or colored cement to match the colour of tile over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed. |
| 26 | M&L for providing and laying 60 mm thick factory made charmfered edge cement concrete paver block of M-35 grade of approved colour, design & pattern as in foothpath, parks, lawns, drive ways or light traffic parking etc of required strength , thickness & size/ shape made by table vibratory method using PU mould, laid in required colour & pattern over and including 50 mm thick compacted bed of fine sand, compacting and proper embedding/ laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 27 | M&L for 75mm thick PCC 1:3:6 , type C-2 (using 40 mm graded crushed stone aggregate) as in plinth protection, laid in slope in 1:30 in alternative bays not exceeding 3 mtr in length. surfaces finished even and fair including raking out joints between panel to panel and panel to wall and plugging the same with bitumen mastic using bitumen and sand mixture in 1:3 complete all as specified and directed . |
| 28 | M&L for PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregates) as in padding over roof finished & laid to required slope, mud stops,roof kerbs complete all as specified and directed . |
| 29 | M&L for HomeSheild PU Roofkoat(or equivalent) is a one component liquid ,solvent free , cold applied , water-proofing membrane that is highly elastic and UV resistant with 10 years warranty .ASTM D 6083-97 a Waterproofing and heat reflecting system having following key performance properties:-a) UV resistant ,prevent yellowing and weatheringb) Highly elastic upto 350% and crack bridgingc) Excellent adhesion on porous and non-porous substratesd) Tensile Strength >10 N/mm2 with GeoTextile fleecee) Soler Reflective Index (SRI) more then 109-111 ASTM E1980-11System: First coat:Providing and applying primer over the prepared surface with HS PU roofkoat Primer(or equivalent)Coverage: 0.2kg/sqm(with 50% dilution of water)Reinforcement: Geotextile 40 gsmSecond coat:Home sheildroofkoat(or equivalent)Consumption: 0.5 kg/sqm.Third coat: HS PU roofkoat(or equivalent)Consumption : 0.8 kg/sqm.System buildup-1.5kg/sqm with geotextile of 40gsm |
| 30 | S&F 12.0 mm thick sheet toughened glass (tinted/frosted/plain) as in partition wall with any type of eaching designed on glass with necessary fixing arrangements complete all as specified and sirected. |
| 31 | S&F solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube, supplying and fixing in opening as per specifications and drawing including making good to distributed surface of walls complete all as specified and directed. |
| 32 | S&F factory made solid panel PVC door shutter 30 mm thick ( style ) consisting of frame work made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour P.V.C‘ C’ channel having a PVC sheet strip 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail lock rail and bottom rail on either side and as gap inserts for top rail; and bottom rail paneling of plain, colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rail with suitable PVC sheets beading and jointed together with solvent cement S&F in frame at site as per specification complete all as specified and directed. |
| 33 | S&F aluminium alloy powder coated aluminium door frame fixed with side hung shutters and glazing or composite panel LDPE core PET coating ( both side decorative type ) fixed with and including 5.0mm thick aluminium composite panel fixed with rubber gasket with aluminium heading, clips, frame made with aluminium box section as appended below complete all as specified and directed :-(a) Frame 100x38x1.48mm thick with rawl plug(b) Middle and lock rail : 85x44x1.48mm thick(c) Bottom rail : 114x44x1.48mm thick(d) Top rail/style : 114x44x1.48mm thick(e) Aluminium beading : 0.7mm thick(f) Aluminium handle D type 150mm long, aluminium tower bolt 9.9mm dia shoot 200mm long, brass mortise lock 100mm 4 leaver with stainless steel hinges (g) Making good the wall surface to match with existing finishes complete. |
| 34 | S&F pressed steel ventilators, fixed type, with glazing bars complete all as specified and directed. |
| 35 | M&L for 3 mm thick, plain sheet glass, ordinary quality and glazing with oil putty or with any type of beads, in squares n. exc 0.5 sqm each pane complete all as specified and directed. |
| 36 | S&F stainless steel wire cloth , 0.36 mm normal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 37 | S&F aluminium anodised barrel tower bolts, 150mm long of extruded section, fixed to doors with screws complete all as specified and directed. |
| 38 | S&F aluminium anodised ,cast type handle 150mm size complete all as spcified and directed. |
| 39 | S&F 100mm long stainless steel butt hinges, fixed with screws complete all as specified and directed |
| 40 | S&F Mild steel sliding door bolts 150mm long,plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed. |
| 41 | S&F Rotational moulded polyethlene water storage tanks of 1000 litres capacity (cylindrical vertical with closed top) with plastic lid cover, hoisted and fixed in position including making connections complete all as specified and directed. |
| 42 | S&F Ball brass valves,high pressure,with polythene float and flynut complete, screwed for iron pipe or brass ferrule of bore 20mm complete all as specified and directed. |
| 43 | S&F 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed . |
| 44 | S&F Galvanised steel tubing, 15mm bore, medium grade with all fittings, fixed to wall with clamps /ceiling or laid in floors including cutting chases complete all as specified and directed |
| 45 | S&F Galvanised steel tubing, 20mm bore, medium grade with all fittings, fixed to wall with clamps /ceiling or laid in floors including cutting chases complete all as specified and directed |
| 46 | S&F 25mm outer dia stainless steel decorative drapery rod of thickness 20 gauge with stainless steel brackets near to ends with stainless steel finials at both ends and necessary fittings complete all as specified and directed. |
| 47 | S&F vitreous china counter top wash basin, size 560x400x250mm, oval shape , white, to be fixed on counter/ RCC slab including swan neck pillar tap with bottle trap, 32mm waste pipe complete all as specified & directed |
| 48 | S&F bib tap with flange, quarter turn, chromium plated, fancy type, cast copper alloy ,screwed down, screwed for 15 mm bore of iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 49 | S&F two way bib cock with flange,cast copper alloy , fancy type, chromium plated, screwed down for high pressure with crutch or butterfly handle, screwed both ends for iron pipe of 15mm bore complete all as specified and directed. |
| 50 | S&F PVC connection 15 mm x 450 mm including PTMT check nut at both ends complete all as specified and direced. |
| 51 | S&F chromium plated soap dish of size 160x160x90mm, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 52 | S&F stainless steel tubular towel ring ,rectangular of size 20cmx12.5cm, fixed with CP brass screws and brackets including plastic beads complete all as specified and directed. |
| 53 | S&F sheet glass shelf assembly consisiting of 5.5 mm thick sheet glass, shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed. |
| 54 | S&F angle valve with flange,cast copper alloy,fancy type,chromium plated, screwed down for high pressure , screwed both ends for iron pipe of 15mm bore complete all as specified and dircted. |
| 55 | S&F vitreous china wash down water closet pan (pedestal pattern) white in colour including connection pipe to union of flushing cistern, inlet and overflow pipes, connecting only to flushing cistern, anti-syphonage pipe with PVC flush pipe of 32mm dia including plastic seat with cover, white in colour with mild steel chromium plated hinges and 'P' or 'S' trap device complete all as specified and directed |
| 56 | S&F 10 litres PVC, valveless, syphonic action type, flushing cistern, low level,white, with inlet, ball valve, float 32mm PVC 'L' bend and handle including brackets complete all as specified and directed |
| 57 | S&F health faucet (ABS Body) mild steel chromium plated suitable for 8mm dia pipe with 1.0 metre long flexible tube and ABS wall hook including making connectios and fixed in position complete all as specified and directed. |
| 58 | S&F chromium plated toilet paper holder fixed to walls with chromium plated brass screws complete all as specified and directed. |
| 59 | S&F Vitreous china urinal of size 590x390x375mm, white including providing and fixing plugs, bedding urinal against wall in CM 1:2 securing urinal to plugs with & including 60 mm long brass screws, pointing around urinal back in cement, flush pipe, grating and union for discharge pipe and Brass chromium plated waste coupling 32mm bore, Waste pipe PVC 32mm bore complete all as specified and directed. |
| 60 | S&F brass chromium plated shower rose of square size 150 mm with 450mm long arm and with or without swivel joints to steel pipe or union complete all as specified and as directed. |
| 61 | S&F CP brass wall mixer 3-in-1 system with provision of overhead & hand shower complete with 150mm long flexible tube and crutch (quarter turn) pipe, for hot and cold water, screwed down for iron of bore15mm complete all as specified and directed. |
| 62 | S&F chromium plated spreader for urinal for fixing with 15mm dia pipe complete all as specified and directed. |
| 63 | S&F chromium plated stainless steel towel hanger with 06 hooks fixed to wall complete all as specified and directed. |
| 64 | S&F PVC (SWR) type-B multi floor trap plain with stainless steel grating having diameter of outlet 75 mm including jointing with solvent cement to waste pipe, laid in cement concrete 1:2:4 type B-1 complete all as specified and directed. |
| 65 | S&F PVC (SWR) floor trap plain with stainless steel grating having diameter of outlet 75 mm including jointing with solvent cement to waste pipe, laid in cement concrete 1:2:4 type B-1 complete all as specified and directed. |
| 66 | S&F UPVC (SWR) type B pipes, 110 mm bore, single socketed, in any length with rubber ring joints,laid in floors/treaches or fixed to walls with nail at spacing of 1m center to center including stack clamp of GI flat 30mm wide 2mm thick complete all as specified and directed. |
| 67 | S&F UPVC (SWR) type B pipes, 75 mm bore, single socketed, in any length with rubber ring joints, laid in floors/treaches or fixed to walls with nail at spacing of 1m center to center including stack clamp of GI flat 30mm wide 2mm thick complete all as specified and directed. |
| 68 | S&F UPVC (SWR) bends , any radius, 75 mm bore complete all as specified and directed |
| 69 | S&F UPVC (SWR) bends , any radius, 110 mm bore complete all as specified and directed |
| 70 | S&F UPVC (SWR), junction single, (single 'T') equal or unequal for 110 mm bore complete all as specified and directed |
| 71 | S&F UPVC (SWR), vent cowl 110 mm dia complete all as specified and directed |
| 72 | S&F UPVC (SWR), vent cowl 75 mm dia complete all as specified and directed |
| 73 | S&F designed looking mirror of size exc 0.54 sqm but n. exc 0.75 sqm of selected quality 6mm thick glass, fixed to wall with chromium plated plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 74 | M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over 1mm thick wall care putty complete all as specified and directed. |
| 75 | M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over 1mm thick cement base wall care putty complete all as specified and directed. |
| 76 | M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed. |
| 77 | M&L for preparation of new or previously untreated steel surface of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed |
| 78 | M&L for framed work as in doors or gates,water tank staging,cooler stand,cattle fencing etc of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing using Fe 290 (Gde-E-165) complete. complete all as specified and directed . |
| 79 | S&F Reinforced concrete pipes of size 150mm (internal dia),class NP-2 , laid, jointed and tested complete with collar complete all as specified and directed . |
| 80 | M&L for Concrete bed to drain pipes of dia 150mm in cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) including packing under and haunching against the sides of pipe after laid & tested including necessary formwork complete all as specified and directed. |
| 81 | M&L for plain cement concrete 1:2:4 ,type B1(using 12.5mm graded crushed stone aggregates)as in lintels upto 1.5m clear span, window or door cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60cm in height, copings,side posts of precast jallies,benching etc. including slightly rounded or chamfered angles including necessary formwork complete all as specified and directed. |
| 82 | M&L for providing precast cement concrete 1:2:4, type B1, (using 20mm graded crushed stone aggregates) as in landings, cover slabs (for man holes cover) and similar articles with plain faces set in cement mortar 1:4 complete all as specified and directed . |
| 83 | Excavating in post holes each not exc 0.50 cum, getting out in any type of soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layer not exc 25cm and removing surplus soil to a distance not exc 50m and making good surface all as specified`and directed . |
| 84 | Surface excavation n.exc. 30 cm deep and averaging 15 deep and getting out in any type of soil complete all as specified and directed. |
| 85 | M&L for plain cement concrete 1:3:6, type C-2, (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed. |
| 86 | S&F mild steel work such as in angle iron fencing posts, struts and flat iron fillets, gates etc, including drilling hole, punching,splitting ends to secure chain link fencing or fixing of barbed wire to posts including all necessary cutting, welding bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 quality complete all as specified and directed. |
| 87 | Supply only mild steel galvanized chain link (dia of wire 4mm) cold dip fencing of aperature 50mm x50mm complete all as specified and directed. Note: The weight of chain link fencing shall be ascertained by BOO as ordered by GE and payment shall be made accordingly and contractor shall have no claim on this account. |
| 88 | Fixing only chain link fencing including line wires(steel wire), any mesh, size and type to any type of standards, rails, straining bolts etc including provision of binding wire compete all as specified and directed Note:- Angle iron, flat iron and nuts & bolts shall be measured and paid separately. |
| 89 | M&L for plain cement concrete 1:2:4 ,type B1(using 12.5mm graded crushed stone aggregates) as in mass concrete for fixing chain link fencing complete all as specified and directed. |
| 90 | S&F mild steel screw bolts having dia of neck 11 mm to 15 mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut,length of bolt exc 10 cm but n. exc 15 cm long complete all as specified and directed . |
| 91 | S&F Galvanised, 2 strand, steel barbed wire 2.24 mm dia, barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails, straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc. as directed (each line wire to be measured).complete all as specified and directed. |
| 92 | S&F mild steel round bars 10 mm dia, fixed to chain link fencing using 0.90 mm dia GI wire as strengthing bar conforming to Fe-410-W (Gde.E-250) quality-A or Fe 290 (Gde - E-165) complete all as specified and directed. |
| 93 | S&F Pre painted galvalume aluminium zinc coating (AZ-150 micron) GI based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall fixed with self tapping screws complete all as specified and directed . |
| 94 | S&F Pre painted galvalume aluminium zinc coating (AZ-150 micron) GI based plain steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall fixed with self tapping screws complete all as specified and directed. |
| 95 | Point wiring complete with 1.5 sqmm single core PVC insulated unsheathed cable(ISI marked) 1100 volts grade FRLSH with multistranded copper conductor, drawn through concealed / surface in wall / roof/ceiling surface and its accessories on the surface etc including PVC rigid concealed medium grade conduit of suitable size with all accessories such as bend, reducers, MS hooks including modular galvanised flush boxes of suitable size and white cover plate with frame as per relevant IS for mounting modular switches, sockets, fan regulators etc including continuous earth wire of size 1.5 Sqmm PVC FRLSH stranded copper conductor unsheathed, insulated, stranded connected to common earth point dolly for one light point/fan point/call bell point, 230 volts controlled by one switch complete all as specified and directed . Note:- Proper colour coding is to be followed as per IS specifications. |
| 96 | All as per srl item No 95 above but One 3 pin socket outlet 6 amp independent complete all as specifieds and directed |
| 97 | All as per srl item No 95 here-in-before but for one 3 pin socket outlet 16 Amp independent with cable of size 2.5 sqmm for point wiring and 2.5 sqmm as in continuous earth wire. |
| 98 | S&F modular type switch, one way 6 Amps , 1 module complete all as specifieds and directed . |
| 99 | S&F ceiling rose, surface backelite, two/ three terminal, 240 volts complete all as specifieds and directed . |
| 100 | S&F LED light fitting 1 x 18Watt, 220V,decorative box type with driver, holder including LED tube light, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose with all fixing arrengenment complete all as specifieds and directed . |
| 101 | S&F energy saving new generation 10W LED bulk head luminaire with opal diffuser, IP 65 and including connecting up with twin core twisted flexible copper coductor cable with suitable size of 230 volt,50 Hz complete all as specified and directed. |
| 102 | S&F Sheet metal enclosure for DBs,SPN, double door,IP-43 protected, 240 Volts,8 ways with 200 amps rated copper bus bar complete all as specified and directed |
| 103 | S&F MCB SPN,32 Amp, 240 Volts with rupturing capacity 10 KA, 'C' series, complete all as specifieds and directed . |
| 104 | S&F MCB Single pole, 6 to 32 Amp, 240 Volts with rupturing capacity 10 KA, 'C' series, complete all as specifieds and directed . |
| 105 | S&F exhaust fan, steel body, AC single phase. 230 V of size 300 mm sweep with blades and frame and louvers, hanging on wall with 4 Nos steel fasterners 10mm dia & 100mm long including wall hole and making good the disturbed surfaces as per existing complete all as specified & directed |
| 106 | S&F Submain wiring with two runs of single core PVC FRLSH unsheathed, insulated, copper cable of 6 Sqmm size, multi stranded, 1100 volts grade with PVC insulated,unsheathed FRLSH copper wire 6 Sqmm for continous earth wire drawn into and including concealed PVC conduit of suitable size complete all as specified and directed . Note :- Two runs of 6 Sqmm copper cable and one run of 6 sqmm copper wire earth continuty conductor in conduit with accessories shall be measured as one length) |
| 107 | M&L for complete earthing with galvanised mild steel earth plate electrode of size 600x600x6mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the earth plate not less than 1.5 mtr below ground level connected to galvanised earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised iron including PCC pit in PCC 1:2:4 type B-1, precast RCC cover slab using reinfocement with XPM weighing not less than 1.87 kg/Sqm with suitable handle made of 12mm round bar including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube for watering with one end fixed with cast iron funnel and wire mesh ,15mm dia light grade galvanised steel tubing upto 7.5 m length for drawing earth lead wire protection, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion complete all as specifieds and directed .. |
| 108 | S&F ceiling fan complete with blades,clamp, hooks,down rod and accessories, 230 V, 1200 mm sweep, min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor(BLDC) with remote control and fixing of hooks by anchor fastner including connecting from ceiling rose/connector with & including flexible copper cable of suitable size complete all as specified and directed |
| 109 | S&F electric water heater of capacity 25 litres,BEE 5 Star rated,storage type, steel body vertical type with glass lined /porcelain enamel coated steel inner tank and glass line double ceramic heating element upto 2 KW complete with all accessories such as safety valve,thermostate NRV,connection piece etc and fixing with 04 Nos nut bolt grouting in wall in PCC 1:2:4 (using 12.5mm graded crushed stone aggregate) for hanging the geyser and making good the disturbed surface complete all as specified and directed |
| 110 | S&F modular type fan regulator step down 120 watt, 2 module complete all as specified and directed . |
| 111 | S&F Socket Residual Current Device (SRCD) with steel enclosure including MCB,SPN 25 Amps,240 V, AC supply & plug top 15/16 Amps complete all as specified and directed. |
| 112 | S&F PVC connection 15 mm x 600 mm including PVC check nut at both ends complete all as specified and directed. Please Enable Macros to View BoQ information |
