|
| 1 | Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete with fittings and fixtures such as switches, ceiling roses, pendants, regulators, socket, lamp holders, brackets, bulk head fittings etc. removing material for taking credit (credit shall be recovered as per credit Sch attached) and also making good disturbed surfaces of wall, floors etc. complete all as specified and directed. |
| 2 | Material and labour for point wiring with 1.5 Sqmm copper conductor (Multi-stranded) PVC casing and caping of suitable size (as per conductor run) with all fittings such as bend/corners/ accessories and including PVC insulated electric cable 1100 volts 1.5 Sqmm (multi-stranded) copper single core (Green colour) cable as continuous earth wire connected to common earth dolly in existing CI/wooden/pvc box covered with 3 mm thick plastic laminated sheet for one light point/ fan point/ bell point etc. controlled by one, one way switch. complete all as specified and directed. |
| 3 | All as per item No. 2 above, but for one 3/5 pin socket outlet 5 Amp on independent board. complete all as specified and directed. |
| 4 | All as per Item No 2 above, but for one 3/5 pin socket outlet 5 Amp on same board. complete all as specified and directed. |
| 5 | All as per serial item No 2 above , but for one socket outlet 15 Amps on independent board with 2.5 Sqmm copper conductor ( Multi-stranded ) PVC insulated and unsheating electric cable 1100 volts (ISI Marked) including PVC insulated and unsheathed electric cable 1100 volts 2.5 Sqmm copper stranded conductor as continuous earth wire connected to common earth dolly. complete all as specified and directed. |
| 6 | Material and labour for point wiring with 1.5 Sqmm (nominal area) two single core PVC insulated unsheathed multi stranded copper conductor cable 1100 volts grade, FRLS grade in and including medium duty concealed PVC conduit 20 mm dia or higher and conduit fittings box cutting chases and all accessories with suitable size of sunk type cast iron or pressed steel terminal box 1.2mm thick for mounting of switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet as top cover, including continuous earth wire PVC insulated, unsheathed, multi stranded copper conductor cable 1.5 sqmm (nominal area) FRLS grade, green colour, up to common earth and connected to earth dolly complete for one light point/bell point/fan point/exhaust fan point etc. controlled by one, one way switch. complete all as specified and directed. |
| 7 | All as per Item No. 6 above, but for one 3/5 pin socket outlet 5 Amp on the same board with other switches. complete all as specified and directed. |
| 8 | All as per item No 6 above, but for one 3 pin socket outlet 5 Amp on independent board. complete all as specified and directed. |
| 9 | All as per serial item No 6 above, but for one socket outlet 15 Amps on independent board with 2.5 Sqmm copper conductor ( Multi-stranded ) PVC insulated and unsheating electric cable 1100 volts (ISI Marked) including PVC insulated and unsheathed electric cable 1100 volts 2.5 Sqmm copper stranded conductor as continuous earth wire connected to common earth, dolly. complete all as specified and directed. |
| 10 | M&L for Switch piano flush type single pole one way 5 Amps. complete all as specified and directed. |
| 11 | M&L for Switch piano flush type single pole one way 15 Amp. complete all as specified and directed. |
| 12 | M&L for socket outlet 2 in 1, 3 pin, 5 Amp and 15 Amp flush type. complete all as specified and directed. |
| 13 | M&L for socket outlet 2 in 1, 3 pin, 5 Amp flush type. complete all as specified and directed. |
| 14 | M&L for switch socket combination 2 in 1, 5 Amp and 15 Amp flush type all as specified and directed. complete all as specified and directed. |
| 15 | M&L for Switch socket combination 2 in 1, 5 Amp flush type. complete all as specified and directed. |
| 16 | Material and labour (in replacement) for call bell ding dong AC 230 volt single pole. complete all as specified and directed. |
| 17 | Material and labour (in replacement) for Bell push Switch flush button single pole one way 5 Amps. complete all as specified and directed. |
| 18 | M&L (in replacement) for Modular switch 1 way 6A, 1 module. complete all as specified and directed. |
| 19 | M&L (in replacement) for Modular switch 1 way 16A, 1 module. complete all as specified and directed. |
| 20 | M&L (in replacement) for Modular socket, 6A - 2/3 pin combined 2 module. complete all as specified and directed. |
| 21 | M&L (in replacement) for Modular socket, 6A/16A - 2/3 pin combined 2 module. complete all as specified and directed. |
| 22 | S & F White cover plate with frame, 1 module. complete all as specified and directed. |
| 23 | All as per above item No 22 but for 2 module. complete all as specified and directed. |
| 24 | All as per abobe item No 22 but for 3 module. complete all as specified and directed. |
| 25 | All as per abobe item No 22 but for 4 module. complete all as specified and directed. |
| 26 | All as per abobe item No 22 but for 6 module. complete all as specified and directed. |
| 27 | All as per abobe item No 22 but for 8 module. complete all as specified and directed. |
| 28 | All as per abobe item No 22 but for 12 module. complete all as specified and directed. |
| 29 | S & F Surface Mounting Plastic Boxes for mounting modular frame, 1 module. complete all as specified and directed. |
| 30 | All as per abobe item No 29 but for 2 module. complete all as specified and directed. |
| 31 | All as per abobe item No 29 but for 3 module. complete all as specified and directed. |
| 32 | All as per abobe item No 29 but for 4 module. complete all as specified and directed. |
| 33 | All as per abobe item No 29 but for 6 module. complete all as specified and directed. |
| 34 | All as per abobe item No 29but for 8 module. complete all as specified and directed. |
| 35 | All as per abobe item No 29 but for 12 module. complete all as specified and directed. |
| 36 | Material and labour for ceiling rose surface type, 65 mm x 50 mm two to three terminals / PVC / Each polycarbonate, isolated body, fixed on PVC block,. complete all as specified and directed. |
| 37 | Material and labour for angular type lamp holder, PVC/ polycarbonate type with back plate suitable for 15/18 watts for batten fitting including plastic square board of required size. complete all as specified and directed. |
| 38 | M&L (in replacement) for Sub main wiring in PVC casing caping/conduit with 2 Nos single core PVC insulated copper conductor cable flame proof size 6.0 sqmm multistrand and 6.0 sqmm PVC insulated flame proof earth wire using suitable size of copper thimble. complete all as specified and directed. |
| 39 | M&L (in replacement) for Sub main wiring in PVC casing caping/conduit with 2 Nos single core PVC insulated copper conductor cable flame proof size 4 sqmm multistrand and 4 sqmm PVC insulated flame proof earth wire using suitable size of copper thimble. complete all as specified and directed. |
| 40 | Supply & fix in replacement of existing UNSV Sheet metal enclosure with new DB's suitable for MCBs of single pole and neutral 4 way double door type w/suitable size of bus bar. Note: i) Connections of the MCB'S shall be done with appropriate size of brass/Cooper thimble. ii) The disturbed surface shall be match with existing shall be part of job. complete all as specified and directed. |
| 41 | Supply & fix in replacement of existing unserviceable Sheet metal enclosure with new DB's suitable for MCBs of single pole and neutral 8 way double door type with suitable size of bus bar. Note: i) Connections of the MCB'S shall be done with appropriate size of brass/Cooper thimble. ii) The disturbed surface shall be match with existing shall be part of job. complete all as specified and directed. |
| 42 | Supply and fixing (in replacement) amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB), of current carrying capacity SP 5 to 32 Amp MCB. complete all as specified and directed. |
| 43 | Supply and fixing (in replacement), SPN, 240V, 10KA 'C' curve miniature circuit breaker (MCB) of current carrying capacity SPN 32 Amp MCB. complete all as specified and directed. |
| 44 | Supply and fixing (in replacement), SPN, 240V, 10KA 'C' curve miniature circuit breaker (MCB) of current carrying capacity SPN 40-63 Amp MCB. complete all as specified and directed. |
| 45 | Supply & fix in replacement of existing unserviceable Sheet metal enclosure with DB's suitable for MCBs of triple pole and neutral 4 way, 415 volt, double door type with 200 amp rated bus bar double door type with one incoming and 12 outgoing Note: i) Connections of the MCB'S shall be done with appropriate size of brass/Cooper thimble. ii) The disturbed surface shall be match with existing shall be part of job. complete all as specified and directed. |
| 46 | Supply and fix in replacement of MCB TPN 63 Amp. complete all as specified and directed. |
| 47 | Supplying and fixing (in replacement) 1100 volts grade heavy duty cable PVC insulated aluminium conductor of size 10sqmm, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apartincluding44mm suspension wire, one twin core cable flat or circular. complete all as specified and directed. |
| 48 | Supply and fixing (in replacement) LED lights fitting 1x 18/20 watts 220V, Surface mounting General Purpose ultra-slim economical LED Battens in Extruded PC housing and Square shaped diffuser with wide range of wattages to suit variety of application areas ind connecting up with three core flexible copper conductor cable of suitable size from ceiling rose. complete all as specified and directed. |
| 49 | Supply and fixing in replacement 1x20 watt Inverter LED batten with Lithium Ion battery , 3 Step Dimming Upto 10 hours Battery backup Charging time 8 hours-10 hours connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed make:- Havells - Pride Plus Inverter Batten 20 W 6500 K V1 ordering code LHEXASP7N1W020 or equivalent. complete all as specified and directed. |
| 50 | Supply and fixing (in replacement) LED light fitting mirror type 2 feet long, 10 watt 220 V With extruded polycarbonate, environmental friendly & energy efficient this linear profile LED lighting fixture provides uniform illumination for brighter light, including connecting up with three core flexible copper conductor cable of suitable size. complete all as specified and directed. |
| 51 | Supply and fixing in replacement round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size. complete all as specified and directed. |
| 52 | Supply and fixing in replacement round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size. complete all as specified and directed. |
| 53 | Supply and fixing in replacement LED light fitting 1x9W/1X10WBulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. complete all as specified and directed. |
| 54 | Supply and fixing in replacement LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size. complete all as specified and directed. |
| 55 | Supply and fix electronic meters single phase temper proof LCD display with polycarbonate cover 240 V, 10-60Amp, accuracy class-1 50Hz, conforming to IS 13779, IP-54, with Prameters to show data, time, current reading, load, PF, voltage and KWH including removal old unsv energy meter any type and make all as specified and directed by Engr-in-Charge. Note : Old unsv energy meter to be deposited to MES store. This will be taken against the BER. complete all as specified and directed. |
| 56 | Supply and fix electronic meters three phase temper proof LCD display with polycarbonate cover, 3x240 V, 10-60Amp, accuracy class-1 50Hz, conforming to IS 13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage and KWH including removal old unsv energy meter any type and make all as specified and directed by Engr-in-Charge. Note : Old unsv energy meter to be deposited to MES store. This will be taken against the BER. complete all as specified and directed. |
| 57 | Taking down exhaust fans 250/ 300/ 380/ 450 mm sweep, and then properly cleaning and greasing of bearings after opening of the fan including replacement of unserviceable parts, reassembling and reconnecting of exhaust fan all as directed. Note:- Spare parts will be measured and paid separately at 'supply only rates'. complete all as specified and directed. |
| 58 | Supply only ball bearing of exhaust fans of any size and type all as per site requirement including greasing. complete all as specified and directed. |
| 59 | Material and labour for rewinding of exhaust fan of 225 to 300 mm sweep complete with super enameled insulated copper wire of appropriate size , including all winding, insulating material and impregnation of insulating varnish as per detail given below of any make, type, model including transportation from AGE E/M store yard to site of rewinding. complete all as specified and directed. |
| 60 | All as per Item No. 59 above but exhaust fan of 450 mm sweep. complete all as specified and directed. |
| 61 | Taking down carefully from wall after unscrewing nut/bolts geyser 50/35/25 Ltr capacity and opening the same for taking out internal tank, syphon assembly etc and reassembling and refixing after repair Note:- Spares shall me measured and paid sepratley under respective items of Sch. complete all as specified and directed. |
| 62 | Supply only heating unit (element) ISI marked of 1.5/2.0 Kw rating triangular/ circular / any shape, as required and as per sample at site including rubber washers. complete all as specified and directed. |
| 63 | Supply and fixing in repair stainless steel flexible connection pipe for hot and cold water with 18 inch long 15mm dia ISI Marked. complete all as specified and directed. |
| 64 | Supply and fixing Supply and fixing in replacement pin anchor/ fastner bolt 10mmX100mm long complete all as specified d and directed (Note:- Anchor bolt shall be grouted with hammer drill only). |
| 65 | Supply only ISI marked thermostat range 0°-75°C for the geysers of 25 to 50 Liters capacities complete, all as specified and directed (As per sample). |
| 66 | Supply for 15mm stop valve CP fancy type,cast copper alloy,screwed down high pressure with crutch or butterfly handle screwed both ends for pipe unions and suitable complete all as specified and directed. |
| 67 | Supply and fixing Supply and fixing in replacement mild steel galvanised iron water tubing 15mm bore with screwed & socket joints, medium grade, in short lenghts, with and including all fittings such as sockets,bends,elbows,unions,tees,diminishing pieces etc, fixed to wall or ceiling or in floor complete all as specified and directed. |
| 68 | Supply and fixing (in replacement) Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 A complete all as specified and as directed. complete all as specified and directed. |
| 69 | Supply and fixing in repair wall security LED light fittings of Cap 25 W suitable for New generation energy saving and environmental friendly long life, light made up of pressure die cast aluminium housing with highly efficient LEDs as Lighting Source and PC cover with integrated lens with IP66 protection and impact resistance of IK07, complete all as specified and directed. |
| 70 | Supply and fixing (in replacement) PVC body Exhaust fan 200/250 mm sweep, 5 star rating, 230 V AC, copper binding, blades, frame, and louvers with suitable size of copper wire for connection ceiling rose to Exhaust fan including making good surface and complete all as specified and directed. |
| 71 | Taking down ceiling fan, 1200/1400 mm sweep, and then properly cleaning and greasing of bearings after opening of the fan including replacement of unserviceable parts, reassembling and reconnecting of exhaust fan complete all as specified and directed. Note:- Spare parts will be measured and paid separately at 'supply only rates'. |
| 72 | Material and labour for rewinding of ceiling fan motor 1200/1400 mm sweep any make with super enameled copper winding wire of gauge as per existing including cutting and getting out old US winding, sleeve work, varnishing with E class insulation varnish, threading connections with twin core copper flexible wire of size 0.0076mm of length not more than one mtr with each fan complete all as specified and directed. Material to be used as per ISI marked. (i) Fixing of repaired fan in any location of cantt area shall be contractors responsibility at his own arrangement of transport and Tand P. (ii) Old burnt wire will be contractors property and necessary credit shall be recovered as per sch of credit attached ). |
| 73 | Supply only ball bearing of ceiling fans of any size and type all as per site requirement including greasing, complete all as specified and directed. |
| 74 | Supply only capacitor of size 2.5 MFD for ceiling fan. complete all as specified and directed. |
| 75 | Supply only capacitor of size 4 MFD for ceiling fan. complete all as specified and directed. |
| 76 | Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. (M & L). complete all as specified and directed. |
| 77 | S & F (In replacement) stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd. complete all as specified and directed. |
| 78 | Supply and fixing (in repair/replacement) Decorative, wall mounting, brushed nickel finish fixture with acrylic diffuser suitable with 9 W LED lamp B22 base complete with, three core flexible copper conductor cable complete all as specified and directed. |
| 79 | Supply and fixing (in repair/replacement) stainless steel geyser assembly, 6 hole, 1.5/2.0 kw, suitable for 25 ltr capacity geyser complete with gasket etc and complete all as specified and directed. |
| 80 | S&F LED tube rod in repair (single /double side connection) ultra bright glass LED tube of Capacity 20W, 230V, with high efficacy, glare free, for installation in existing fittings including taking down old unserviceable one complete all as specified and directed. |
| 81 | S&F 1200 mm sweep ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V Min air delivery 210 CFM, Five star rating complete all as specified and directed. Note: Old unsv Ceiling Fan will be deposited in MES store yard |
| 82 | M&L Supply and fixing in replacement for earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground(earth plate not less than 2.25 mtr deep below the normal ground level ) with top edge of plate not less than 1.5 mtr deep below the normal ground level connected to galvanized earth wire 4mm dia by means of nuts,bolts,washers,check nuts of iron or steel including test point PCC pits and RCC cover in PCC 1:2:4 (type B-1) including iron angle frme 40*40*6mm, and medium grade GI watering pipe 20mm dia with funnel and wire mesh and 15 mm bore GI pipe light grade protection pipe including excavation and charcoal ,common salt surrounded with 15cm all around the plate all as specified and shown in EP-3 of SSR Part-1 & complete all as specified and directed. |
| 83 | Repair/replacement for sheet metal enclosure (DB Box) of size 750x600x300mm or as per site requirement, made out of 2mm thick MS sheet suitable for fixing the MCB DB & meters, single door type with locking arrangement and reconnecting commissioning including 2 coats of synthetic enamel paint over a coat of red oxide primer to internal and external surfaces with machine spray, necessary cutting, PCC work, disturbed surfaces match to existing surface complete included in the job complete all as specified and directed. |
| 84 | Supply & fixing water heater storage type metallic outer body and stainless steel inner container, 25 Ltrs capacity, electric suitable for single phase, 50 Hz, AC Supply, 5 star rating, including all necessary fittings and fixture with minimum 1M of three core 2.5 sqmm twisted copper conductor cable PVC sheathed, three pin plug top complete with necessary fittings and fixtures all as specified and directed. Note: Old unsv Geyser will be deposited in MES store yard. complete all as specified and directed. |
| 85 | Supply & fixing water heater storage type metallic outer body and stainless steel inner container, 50 Ltrs capacity, electric suitable for single phase, 50 Hz, AC Supply, 5 star rating, including all necessary fittings and fixture with minimum 1M of three core 2.5 sqmm twisted copper conductor cable PVC sheathed, three pin plug top complete with necessary fittings and fixtures complete all as specified and directed. Note: Old unsv Geyser will be deposited in MES store yard. |
| 86 | Dismantling carefully Solar storage water heating system of any capacity, any type for following works with testing and re-fixing the same in original position making all water/ electric connection to entire satisfaction of Engineer-in-charge after repair as under:- (a) Inspection, opening, of all parts, descaling, washing of inner tank with chemical solution and cleaning of outer cover storage tank. (b) Checking water tightness of storage tank after cleaning (c) Checking and correcting earth continuity of electrical items. (d) Adjustment of reducing valves, checking of dead weight type high pressure release valve and visual check of fusible plug for its intactness. Note:- Supply and fixing of spare parts, wiring etc shall be measured & paid separately. complete all as specified and directed. |
| 87 | Repair and welding to stainless steel water storage tank of solar storage water heating system of any capacity 100 to 500 LPD, to prevent any type of leakage at site with testing and re-fixing the same in original position making all water / electric connection to entire satisfaction of Engineer-in-Charge after repair as under:- (a) Inspection, opening, of all parts, descaling, washing of inner tank with chemical solution and cleaning of outer cover storage tank. (b) Checking water tightness of storage tank after cleaning (c) Checking and correcting earth continuity of electrical items. (d) Adjustment of reducing valves, checking of dead weight type high pressure release valve and visual check of fusible plug for its intactness. Note:- Supply and fixing of spare parts, wiring etc shall be measured & paid separately. complete all as specified and directed. |
| 88 | Taking out existing Split AC of capacity 1.5/2Ton by carefully disconnecting existing electrical connection, removing aside, servicing after proper cleaning and refixing including all electrical connections, checking for leakage etc if any complete all as specified and directed. |
| 89 | M&L for leakage testing with nitrogen, flushing and gas charging for Split type AC 1.5 ton with suitable refrigerant and testing complete all as specified and directed. |
| 90 | S&F in repair indoor unit air filter for split type AC of capacity 1.5 ton capacity complete all as specified and directed. |
| 91 | Supply and fix in repair PCB with remote of Split AC of capacity 1.5 ton as per existing make complete all as specified and directed for the following capacity :-. |
| 92 | S&F in repair fan blower motor for split type AC of capacity 1.5 Ton as per site requirement of existing make available at site complete all as specified and directed. |
| 93 | Supply and fix in repair thermostat for split type AC of suitable capacity 1.5 Ton as per site requirement complete all as specified and directed. |
| 94 | Supply and fix in repair relay assembly suitable capacity 1.5 Ton as per site requirement complete all as specified and directed. |
| 95 | Disconnecting refrigerator of capacity upto 315 ltrs for cleaning with blower & soap water solution making dust free to the system, tightening all nuts bolts screws etc. and spray painting over a coat of red oxide primer matching with the existing colour and refixing the refrigerators in existing places properly complete all as specified and directed. |
| 96 | Material and labour refrigerant gas charging in the system including replacement of defective capillary tube and strainer upto 315 ltrs capacity refrigerator complete all as specified and directed. |
| 97 | Supply and fix in repair box type relay assembly of refrigerator upto 315 ltrs capacity complete all as specified and directed. |
| 98 | Supply and fix in repair thermostat for refrigerator upto 315 ltrs capacity complete all as specified and directed. |
| 99 | Supply and fix in repair PCB for refrigerator of any capacity and type (Single/double door ) complete all as specified and directed. |
| 100 | S & F in repair hermetically sealed compressor of capacity up to300/315 ltrs and re-connecting the compressor to the system properly, including recharging refrigerant gas complete all as specified and directed. Please Enable Macros to View BoQ information |
