|
| 1 | Taking down chowkhat with shutter without taking off shutter from chowkhat not exceeding 1.5 Sqm each complete all as specified and as directed by Engr-in-Charge |
| 2 | Ditto all as per item No 01 but exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and as directed by Engr-in-Charge |
| 3 | Taking down shutter of any description nexc 1 Sqm each complete all as specified and as directed by Engr-in-Charge |
| 4 | Taking down shutter of any description exc 1 Sqm but n'exc 2 Sqm each complete all as specified and as directed by Engr-in-Charge |
| 5 | S&F 35mm Flush shutters(ISI Marked) solid core construction, with block board core and plywood, commercial type on both sides complete all as specified and as directed by Engr-in-Charge. |
| 6 | S&F 35mm thick glazed and skeletion shutters 2nd class hardwood without sash bars complete all as specified and as directed by Engr-in-Charge. |
| 7 | Supply and fix 30mm thick, 2nd class hard wood, glazed and skeleton window shutters, open rebated and prepared to receive glass or gauge etc divided into square with framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass or gauges etc sizes of members of shutters as specified in SSR Part-I Section 8 clause 8.24 (b) complete all as specified and as directed. |
| 8 | S&F steel windows with side hung shutters including box type hinges with steel handle and steel peg stay complete with glasing bars dovetail ed or welded all complete all as specified and as directed by Engr-in-Charge. |
| 9 | S&F powder coated Aluminium three track sliding glazed window manufactured with approved aluminium section with three sliding shutters each shutter width one half of the length of window with the following specifiecation and making good the adjascent surfaces (a) Window frame of cross section 101mmx40mmx1.5mm thick.(b) Three way track for smooth slding shutters of cross sections 91.80mmx31.75mmx1.1mm thick.(c) Sliding shutter frame of cross section 40x18x1mm. (d) Aluminium glazing stip of size 18.2x16.66mm. (e) 4mm thick flat glass superior quality for two shutter.(f) IDPE rubber gasket for fixing glass.(g) Locking cleat/device as shutter 01 Nos. (h) 02 Nos sliding roller per shutters.(j) aluminium wire cloth 0.36mm stainless steel nominal dia of wire and average width of aperature 1.40mm for one shutter.(k) Fixing screws for frame with wall 06 per window with fancy design.(Note: Window will be measured outer to outer frame and no extra to be paid.) |
| 10 | M&L for powder coated alumunium chowkhat of size 101.6mmx44.5mmx1.5mm thick in section fixed to walls and alumunium frame with anodised alumunium screws complete all as specified and directed by Engr-in-Charge. |
| 11 | S&F powder coated alumunium glazed door shutter with two panel made of vertical style of size 85x44.5x1.5mm and Top rail size 114.30x44.5mmx1.5mm bottom rail 150mmx44.5mmx1.5mm and middle rail 114.3mmx44.5mmx1.5mm all alumunium section including all fittings as per door shutter such as alumunium door handles round type-2 Nos ,stainless steel hinge 100mm size -4Nos,central mortice lock ,alumunium tower bolts 300mm-2 Nos double leg alumunium anodised door stopper and hydraullic door closer ,designation No 2, universal type ,cast iron body ISI marked and necessary clips rubber packing and alumunium beading to receive and including 5.5mm thick plain tined glass or 6mm thcik alumunium composite panel in top and bottom panel. complete all as specified and as directed by Engr-in-Charge. (Note: Door shutter will be measured outer to outer frame and no extra will be paid). |
| 12 | S&F pressed steel frames of size 125 x 60 mmx1.25mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and as directed by Engr-in-Charge. |
| 13 | S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed by Engr-in-Charge. Make : RAJYSHREE PLASTIWOOD, M/S SINTEX |
| 14 | Supplied and fixed factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined to gether with solvent cement, suppling & fixing in the frame as per specification & drawing complete all as specified and as directed by Engr-in-Charge. |
| 15 | Dismantling of fillets rails etc under 40 sqcm in section in framed work complete all as specified and as directed by Engr-in-Charge |
| 16 | S&F factory made steel ventilators with top hung shutters including hinges,steel peg stay complete all as specified and as directed by Engr-in-Charge. |
| 17 | S&F GI mild steel wire cloth 0.56 nominal dia wire and average width aperture 1.18mm and fixed with pinned tack or galvanized staples complete all as specified and as directed by Engr-in-Charge. |
| 18 | S&F in repair GI mild steel wire cloth 0.56 nominal dia wire and average width aperture 1.18mm and fixed with pinned tack or galvanized staples all complete all as specified and as directed by Engr-in-Charge. |
| 19 | Re-securing or easing and adjusting without taking down wooden shutter of any description not exc 1Sqm each complete all as specified and as directed by Engr-in-Charge |
| 20 | Re-securing or easing and adjusting without taking down wooden shutter of any description exc 1Sqm but n exc 2 Sqm each complete all as specified and as directed by Engr-in-Charge. |
| 21 | Running welding in repairs thickness of metal to be welded exc 6mm but n exc 9mm complete all as specified and as directed by Engr-in-Charge. |
| 22 | M&L for 2nd class H/wood chowkhats, plain, solid, straight, wrought, framed, rebate on the solid,rounded or chamfered put together with glue pinned at joints complete all as specified and as directed by Engr-in-Charge. |
| 23 | M&L for mild steel works as in hold fast/wind ties etc. |
| 24 | S&F MS 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed by Engr-in-Charge. |
| 25 | S&F in repair MS 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed by Engr-in-Charge. |
| 26 | S&F mild steel sliding door bolts 300mm long complete all as specified and as directed by Engr-in-Charge. |
| 27 | S&F in repair mild steel sliding door bolts 300mm long complete all as specified and as directed by Engr-in-Charge. |
| 28 | S&F 100mm size MS butt hinges, medium weight cold rolled complete all as specified and as directed by Engr-in-Charge. |
| 29 | S&F in repair 100mm size MS butt hinges, medium weight cold rolled complete all as specified and as directed by Engr-in-Charge. |
| 30 | S&F in repair 125mm size MS butt hinges, medium weight cold rolled complete all as specified and as directed by Engr-in-Charge. |
| 31 | S & F 150mm long Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed by Engr-in-Charge. |
| 32 | S & F in repair 150mm long Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed by Engr-in-Charge. |
| 33 | S & F 150mm long Aluminium handle cast type anodised complete all as specified and as directed by Engr-in-Charge. |
| 34 | S & F in repair 150mm long Aluminium handle cast type anodised complete all as specified and as directed by Engr-in-Charge . |
| 35 | S&F 75 mm long mild steel medium weight collrolled butthinges complete all as specified and as directed by Engr-in-Charge. |
| 36 | S&F in repair 75 mm long mild steel medium weight collrolled butthinges complete all as specified and as directed by Engr-in-Charge. |
| 37 | S&F 125mm size aluminium handles, cast type anodised complete all as specified and as directed by Engr-in-Charge. |
| 38 | S&F in repair 125mm size aluminium handles, cast type anodised complete all as specified and as directed by Engr-in-Charge. |
| 39 | S&F small fitting shaped door and window stops n'exc 200 cucm each of 2nd class hard wood complete all as specified and as directed by Engr-in-Charge. |
| 40 | M&L for mild steel works as in framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted or forged into spikes and similar works conforming to Fe-290, Gde-E165 etc complete all as specified and as directed by Engr-in-Charge. |
| 41 | M&L for fixed in repair 18/19 mm thick preliminated particle board Exterior grade preliminated one side with decorative choice laminated & other side balancing white laminated fixed with screw to timber fram work complete all as specified and as directed by Engr-in-Charge. |
| 42 | S & F 30 mm continous (piano ) hinges mild steel, bright finish or electrogalvanised complete all as specified and as directed by Engr-in-Charge. |
| 43 | S&F 75 mm Hasp & staple MS stove enammeled black , including bolt to hinge plate and fixed with screw complete all as specified and as directed by Engr-in-Charge. |
| 44 | S&F 40mm dia , cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and as directed by Engr-in-Charge. |
| 45 | M & L for preparation of new surfaces & apply two coats of synthetic enamel paint over one coat primer exc 10 cm width/girth including preparation of new surface on wooden surface complete all as specified and as directed by Engr-in-Charge. |
| 46 | M&L for in applying two coats of synthetic enamel paints over a coat of red oxide primer on new steel surfaces over 10 cm width or girth including preparatinon of surfaces complete all as specified and as directed by Engr-in-Charge. |
| 47 | M&L for PCC 1:2:4 type B1 20mm graded stone aggregate as in padding, hold fasts/filling of chowkhats or similar work complete all as specified and as directed by Engr-in-Charge. |
| 48 | Hacking out old broken glass any thickness from metal/wooden frame including punching or drilling out old glazing pins/spring clips complete all as specified and as directed by Engr-in-Charge. |
| 49 | S & F Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane 3mm thick complete all as specified and as directed by Engr-in-Charge. |
| 50 | Dismantling water tanks and removing exc 250 & nexc 500 ltrs capecity complete all as specified and as directed by Engr-in-Charge. |
| 51 | Dismantling water tanks and removing exc 500 and n exc 1000 ltrs capecity complete all as specified and as directed by Engr-in-Charge. |
| 52 | S&F 500 ltr capacity rotational moulded polyethylene water storage tank (cylindrical vertical closed top) hoisted and fixed in positions, including 20mm dia of ball valved high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe and fixed with anti microbial property. |
| 53 | S&F 1000 ltr capacity rotational moulded polyethylene water storage tank (cylindrical vertical closed top) hoisted and fixed in positions, including 20mm dia of ball valved high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe and fixed with anti microbial property. |
| 54 | S&F 20mm dia of ball valves high pressure of PTMT with epoxy coated alumunium rod & high density plastic ball screwed for iron pipe and fixed in repair complete all as specified and as directed by Engr-in-Charge. |
| 55 | Disconnecting exisiting tanks setting aside for repairng cleaning and removing al scale and dirt etc from mounths of circulating pipes etc and hoisting .reconnecting and refixing in existing position. Capacity of tanks exc 500 ltrs and not exc 1000 ltrs complete all as specified and as directed by Engr-in-Charge. |
| 56 | Disconnecting exisiting tanks setting aside for repairng cleaning and removing al scale and dirt etc from mounths of circulating pipes etc and hoisting .reconnecting and refixing in existing position. Capacity of tanks exc 250 ltrs and not exc 500 ltrs complete all as specified and as directed by Engr-in-Charge. |
| 57 | Supply and fix in repair, sinks with drainage board made of stainless steel 1 mm thick sheet for, kitchen or laboratory with plugs, washers and waste pipe; cast iron cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and as directed by Engr-in-Charge. |
| 58 | S&F as in repairs utensil rack/kitchen rack stainless steel size 850xmmx800mmx270mm as approved make and fixed to wall and as specified and directed by Engineer-in-Charge at site. |
| 59 | S&F in repair vitreous china wash Basin white flat back size 550 x 400mm including brackets, cutting for and pinning in ends of brackets or erecting stand complete all as specified and as directed by Engr-in-Charge. |
| 60 | S&F in repair vitreous china squatting pan , Orissa pattern size 580 x 440 mm white, with integral foot rest including connection to trap, and to flush pipe, anti-syphonage etc |
| 61 | S&F 40 mm low density polyethylene (HDPE) pipes |
| 62 | Supply, fix 15mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including taking down old existing GI pipe wherever required and including testing complete all as specified & directed. |
| 63 | Supply, fix 20 mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including taking down old existing GI pipe wherever required and including testing complete all as specified & directed. |
| 64 | S&F as in repairs pillar tap cast 15mm bore copper alloy fancy type with capstan heads chromium plated screwed down high pressure with or without lettred head `HOT' or `COLD' with long screwed shank and flynuts screwed for iron pipe all as specified and directed by Engineer-in-Charge. |
| 65 | S&F as in repairs bib tap cast 15mm bore copper alloy fancy type with capstan heads chromium plated screwed down high pressure with or without lettred head, screwed for iron pipe etc and all as specified and directed |
| 66 | S&F in repair 32mm waste fittings brass chromimum plated for basin with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed by Engr-in-Charge. |
| 67 | S&F in repair brass chromium plated shower rose 125mm size complete all as specified and as directed by Engr-in-Charge. |
| 68 | S & F in repair Tubular towel rail, 20mm dia, D type, 60 cm long between flanges CP brass.complete all as specified and as directed by Engr-in-Charge . |
| 69 | S&F in repair 15mm, stop valve/angle valve, cast copper alloy fancy type chromium plasted with long shank and cup screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 15mm bore with fancy design and all as specified and directed by Engr-in-Charge. |
| 70 | S&F as in repair 15mm two way angle valve, cast copper alloy fancy type chromium plasted screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in 15mm bore and all as specified and directed by Engineer-in-Charge. |
| 71 | S&F in repair 15mm dia bore, stop valve but long shank (concealed type), cast copper alloy fancy type chromium plated screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in pipe and all as specified and directed |
| 72 | S&F in repairs brass CP wall mixer tap, fancy type, half turn 15mm dia bore (three in one) for mixing hot and cold water screwed down for iron pipe and fixed in wall and all as specified and directed. |
| 73 | S&F in repairs brass 15mm dia CP mixer basin tap (Mixer pillar tap) 15mm dia bore for mixing hot and cold water with lettered `HOT' and `COLD' screwed down for iron pipe with fancy design and all as specified and directed. |
| 74 | Supply and fixing as in repairs vitreous china urinal , half stall type, white with grating and union for discharge pipe (excluding flushing cistern,flush pipe and waste pipe) complete all as specified and directed. |
| 75 | Supplied and fixed in repair vitreous chinaware EWC padestal type closet with white seat & cover with flat bottom with hinging device all as specified and directed. |
| 76 | Supply & fix in repair PVC low level flushing cistern of 9-10 ltrs capacity, ISI Marked, white, symphonic action type with inlet, ball valve, float and handle including brackets and PVC flush pipe of 32 mm bore, suitable for low level cistern complete all as specified & directed. |
| 77 | Dismantling floor, hearth or wall tiling including cement mortar bedding(but not backing), and rubbish off premises etc complete all as specified and as directed by Engr-in-Charge |
| 78 | Demolition of cement concrete(un-reinforced) in ground floors and paving not exceeding 15 cm thickness below or above the ground floor etc complete all as specified and as directed by Engr-in-Charge. |
| 79 | Brushing neat cement slurry with 3.00 Kg of cement per sqm complete all as specified and as directed by Engr-in-Charge. |
| 80 | M&L for light shade vitrified ceramic tiles 10mm thick (square/rectangular)polished,area of each tiles n exc 0.36sqm over 15mm thick screed bed in CM (1:6) in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engr-in-Charge. |
| 81 | M&L for light shade vitrified ceramic tiles 10mm thick (square/rectangular)polished,area of each tiles n exc 0.36sqm but in skirting dado etc over 10mm thick cement plaster in CM (1:4) complete all as specified and as directed by Engr-in-Charge. |
| 82 | M&L for Non- skid colour ceramic tiles,7 to 8mm thick square/rectangular area of each tile exc 0.11 sqm but n exc 0.18sqm in floor over and including 15mm thick screed bed in CM (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor complete all as specified and directed. |
| 83 | M&L for Non- skid colour ceramic tiles,7 to 8mm thick square/rectangular area of each tile exc 0.11 sqm but n exc 0.18sqmbut in skirting including 10mm thickrendering in CM(1:4) complete all as specified and as directed by Engr-in-Charge. |
| 84 | M & L for Non Skid ceramic colour ceramic tiles,7 to 8mm thick square/rectangular area of each tile 0.06sqm but not exceeding 0.11sqm ,in floors over and including 15mm thick screed bed in CM(1:6),set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface coloured cement to match the floor complete all as specified and as directed by Engr-in-Charge. |
| 85 | M&L for coloured glazed ceramic colour tiles in vertical surface in Skirting/Dados 350mmx250mmx7mm /450x350x7mm thick over and including10 mm thick cement plaster in CM (1:4); set and jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces complete all as specified and as directed by Engr-in-Charge. |
| 86 | M&L for machine cut kota stone slab flooring 18-20 mm thick set over and including 15mm thick screed base in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with beewax polishing complete all as specified and as directed by Engr-in-Charge. |
| 87 | M&L Machine cut kota stone slab flooring 18-20 mmas in skirting over 10mm thick cement plaster in CM 1:4 complete all as specified and as directed by Engr-in-Charge. |
| 88 | Material and Labour for 16-18mm thick machine cut (table rubbed and polished) Granite of any type as in steps, jambs, pillars, cills, cooking platforms like in CM 1:4 including pointing with white cement mixed with admixture of pigment to match the shade of the slab complete including screed bed 15mm thick in CM 1:6 all as specified and as directed by Engr-in-Charge. |
| 89 | Rounding to edges of stone slabs on edge such as in steps cooking platform and other similar situations complete all as specified and as directed by Engr-in-Charge. |
| 90 | M&L plain cement concrete, Type D-2, 1:4:8 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed by Engr-in-Charge. |
| 91 | M&L for 100 mm thick cement concrete in foundations/sub base of floor in cement morter (1:3:6) type C-2 complete all as specified and as directed by Engr-in-Charge. |
| 92 | M&L for cement concrete in floors 40mm thick over sub base (1:2:4) type B1 using 20mm graded aggregate finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge. |
| 93 | Forming Contration (Dummy) joints 30 mm deep x 10 mm wide, filled with sealing compound (1 part of bitument and 3 part of sand) complete all as specified and as directed by Engr-in-Charge. |
| 94 | M&L for plain cement concrete, Type C-2, 1:3:6 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed by the Engineer-in-Charge |
| 95 | Dismantling Stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc. |
| 96 | M&L for chequered cement concrete tiles with grey cement and no pigment 30cmx30cmx25mm thick over 15mm thick screed bed in CM 1:6 set jointed and pointed in neat cement slurry in floors complete all as specified and as directed by Engr-in-Charge. |
| 97 | M&L for machine pressed precast concrete interlocking paver block with Grey Cement and pigment any shape and size conforming to IS 15658-2006 of 60mm thickness , M-35 Grade laid over and including 25mm thick sand cushioning all as specified and as directed by Engr-in-Charge. |
| 98 | M&L for spreading and levelling of sand in layers n exc 25cm thick over sub base complete all as specified and as directed by Engr-in-Charge. |
| 99 | M&L for repair and rendering 10mm thick in cm 1 :3 on chajjas, facia, roof projection, column sides, beam bottom and sides including throating after removing cracked plaster and concrete including cleaning of viisible reinforcement and treating with cement slurry also necessary repair to cracked concrete if any with cement concrete 1:2:4 Type B-0 using 12.5mm graded aggregate including necessary scafolding work for double/single storey bldgs complete all as specified and as directed by Engr-in-Charge. . |
| 100 | Taking down aluminum glazed shutter from frames for servicing / replacement of broken pivots, screws etc, complete & refixing in the same opening after repair. (The servicing shall include oiling of hydraulic door closer / floor door spring tightening / refixing of handles, tightening of joints of rail & styles etc & opening of pivot plate & replacement & refixing to obtain smooth opening & closing. |
| 101 | S&F in repairs decorative curtain rod made out of 25mm dia (outer dia) MS pipe having wall thickness 0.63mm, PVC coated of any colour and pattern as approved overall dia 28 to 28mm, includiing and including two nos brackets on each ends alongwith globe on each ends for earch window/door fro fixing complete all as specified and directed with fancy design and approved by Engineer-in-Charge. |
| 102 | S&F as in repairs corner glass shelf 300mm (with fancy ABS brackets) of size (300x300)mm complete all as approved make by Engr-in-Charge at site. |
| 103 | S&F as in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick commerial ply wood and fixed to wooden plugs with chromium plated brass screwes and cup washer complete (with fancy design) |
| 104 | S&F as in repair 600mmx1200mm bevelled edge mirror of selected quality glass, mounted on 6mm thick commerial ply wood and fixed to wooden plugs with chromium plated brass screwes and cup washer complete (with fancy design) |
| 105 | S&F bath cabinet mirror of size 350x450mm made of PTMT alloy complete all as specified with fancy design. |
| 106 | S&F as in repairs health faucet(ABS body) mild steel chromium plasted suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed |
| 107 | Dismantling wall and ceiling board (fibre,pulp,insulations etc) or insulation board any thickness including cover fillets complete all as specified and as directed. |
| 108 | M&L for anodised alumunium snap grid frame work for false ceiling grid of size 605mmx605mm complete hanges from GI wire complete all as specified and as directed. |
| 109 | S&F 4mm thick texture finish type ceiling board fixed to timber/metal framed work with screw as in ceiling snap grid complete all as specified and as directed. |
| 110 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. |
| 111 | M&L for rendering 15 mm thick in cement mortar 1:4 on wall of brick work or concrete surface, finished fair and even all as specified and directed. |
| 112 | M&L for rendering 15 mm thick in cement mortar 1:6 on wall of brick work or concrete surface, finished fair and even all as specified and directed. |
| 113 | M&L for rendering 5 mm thick in cement mortar 1:3 on ceiling of brick or concrete surface, finished fair and even all as specified and directed. |
| 114 | M&L for preparing new plastered surfaces and applying two coats of distember oil emulsion white or tinted over 1mm thick putty after one coat of white primer complete all as specified and directed. |
| 115 | M&L for preparing of old surfaces, washing, rubbing down and stopping of disstempered and painted surfaces and applying two coats of distember oil emulsion on wall over 1mm thick putty complete all as specified and directed. |
| 116 | M & L for material & labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. |
| 117 | M&L for cleaning ther old surface of all the dirt and green algae with wire brush without disturbing the old plaster and then Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over Old surfaces. |
| 118 | Material and labour for preparation of OLD plastered surfaces of ceiling and applying three coats of white wash complete all as specified & directed. |
| 119 | Material and labour for preparation of NEW plastered surfaces of ceiling and applying three coats of white wash complete all as specified & directed. |
| 120 | M&L for brick work using sub class B brick curved or straight on plan exc 6 mtr mean radius built in cm (1:6) including Demolition of Brick/stone works masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and pre-cast concrete articles complete all as specified and as directed by Engr-in-Charge. |
| 121 | M&L brick work using sub class B brick curved or straight on plan to any radius in half brick wall builit in CM(1:4) complete all as specified and as directed by Engr-in-Charge. |
| 122 | S & F in reapir Mortise lock suitable for flush doors with handle and closing from both sides with bright finish complete all as specified and directed S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes confirming to I.S. 1161-1998 Please Enable Macros to View BoQ information |
