|
| 1 | Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided for. Including Tile Bedding layers and removing out side MD Land) complete all as specified and directed . |
| 2 | M&L for cement concrete in foundations, filling and masss concrete type C2 1:3:6 (40mm graded aggregate) complete all as specified and directed . |
| 3 | M&L for Walling of RR Masonry Built In cement Mortar (1:6) uncoursed including PCC (1:3:6) Type C1 Bond stone complete all as specified and directed. |
| 4 | M&L for Walling of RR Masonry Built In cement Mortar (1:6) uncoursed including PCC (1:3:6) Type C1 Bond stone (Except Stone ) complete all as specified and directed . |
| 5 | M&L for Flush pointing to RR Mosonry uncoused or brought up to courses in CM (1:4) complete all as specified and directed . |
| 6 | M&L for 10 mm thick rendering in cement mortar (1:3) on brick / concrete/ stone surfaces mixed with water proofing compound as per manufacturer instruction , finished even and smooth using extra cement complete all as specified and directed. |
| 7 | M&L for cement concrete type B2 , 1:2:4 using 40 mm gradded stone aggregate in surface channels and drains complete all as specified and directed. |
| 8 | Demolition of floor, hearth or wall tiling including cement mortar bedding etc (but not backing) and removing rubbish off the premises complete all as specified and directed. |
| 9 | M&L for cement concrete in foundations, filling and masss concrete type D2 1:4:8 (40mm graded aggregate) complete all as specified and directed . |
| 10 | M&L for vetrified paver ceremic tiles 20 mm thick heavy duty , in light shade, (Square/rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc. set & jointed in 5-8 mm thick ready made adhesive of Gold quality and pointed in coloured cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed. |
| 11 | M&L for Preparation of two coats of synthetic enamel paint on new steel surfaces of any description, over 10cm in width or girth,not otherwise described including preparation over a coat of red oxide Zinc chrome prime complete all as specified and directed. |
| 12 | S&F in repair Black colour solid ACP wall lining consisting of 3mm thick plain inclusive of solvent cement /Adhesive including Alluminium frame work complete all as specifief and directed . |
| 13 | S&F in repair for SS Box type Letters Height 12\\" to 18\\" including Led Lighting and connection up to Main Socket/DB Nos of Letters up to 40 white fixed to ACP sheet as in repair complete all as specified and directed . |
| 14 | S&F in repair MES LOGO 0.5 to 1.0 m height with LED module & power supply cable DB etc as in repair complete all as specified and directed . |
| 15 | M&L for Granite slab 18 mm to 20 mm thick machine cut, bedded and joined with cement and pointed with white cement with admixture of pigment to match over and including 20 mm thick screed bed CM (1:4) .the shade of granite stone including cutting and polishing type as in cill and jamb/skirting, steps cooking plateforms includigng rounding off the exposed edges and polishing complete all as specified and directed. |
| 16 | Demolition of brick work /stone work built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 17 | M&L for Preparation of old decorated surface of wall and including cornices plastered or unplastered surfaces by brooming down or steel wire brushing to remove all loose scales, and foreign materials scarping down , smoke soot moulds , moss and efflorescent salts treating oil and greasy spots and M&L for one coats of distemper oil emlusion white or tinted complete all as specified and directed. |
| 18 | M&L for Preparing of old decorated surface of wall and including cornices plastered or unplastered surfaces by brooming down or steel wire brushing to remove all loose scales, and foreign materials scarping down , smoke soot moulds , moss and efflorescent salts treating oil and greasy spots and M&L applying one coat of white wash , complete all as specified and directed. |
| 19 | M&L for preparation of old painted wooden surfaces and providing one or more coat of synthetic enamal incl preparation of Surfaces of any description, not otherwise described, over 10cm width or girth complete all as specified and directed. |
| 20 | Taking down cement plaster or cement lime plaster or wall tiles of any description on bricks or stone walls etc including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed. |
| 21 | M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth with out using extra complete all as specified and directed. |
| 22 | M&L for waterproof cement based putty @ 1 Kg(undiluted) per sq mtr. of average thickness 1 mm over the plastered/old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labour as per following steps:- Step 1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI Step 3) Allow 6-8 hrs time to dry the putty surface complete all as specified and directed. |
| 23 | Material & Labour for Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new/old work including preparation of existing wall surfaces including primer/removing of existing treatment etc complete all as specified and directed. |
| 24 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new/old surfaces including preparation of existing wall surfaces (using mechnical spray machine etc) complete all as specified and directed. |
| 25 | M&L for providing, cement concrete type B1 1:2:4 (20 mm graded aggregatet) in pedding / coping roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed. |
| 26 | Material & Labour for providing and fixing stainless steel (Grade 304) railing /moulded/ orinimantal door made of hollow tubes,channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed. |
| 27 | Dimantling of PVC fibre roof sheeting, corrugated or semi corrugated or similar pattern roof coverings complete all as specified and directed. |
| 28 | Dimantling asbestos cement sheeting, corrugated or semi corrugated or similar pattern roof coverings complete all as specified and directed. |
| 29 | M&L for Pre-painted galvatume aluminium zinc coating GI based corrugatged steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 30 | M&L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specifiedt complete all as specified and directed. |
| 31 | Dismantling timber scantlings n.exc 40 sq. cm , in any position unframed works complete all as specified and directed. |
| 32 | S&F for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed. |
| 33 | M&L for sand filling under Target / Butt including shape and size as per site/size of Butt as in repair comlete all as specified ans directed.Up to 15 m height complete all as specified and directed. |
| 34 | Dismentling of wrought iron and mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 35 | Fabrication, erection and fixing only MS plates (plain or chequred ) chennals,square cut or notched (ordanery) and counter sunk forming holes with out any attachments all as specified and directed.including welding all round height up to 15m including bottom of slab.(Grade of steel Gde E-250 quality A) Except plate complete all as specified and directed.Note:- Steel plate shall be reused retrived from item No. 34 |
| 36 | M&L for MS plates (plain or chequred ) chennals,square cut or notched (ordanery) and counter sunk forming holes with out any attachments all as specified and directed.including welding all round height up to 15m including bottom of slab.(Grade of steel Gde E-250 quality A) complete all as specified and directed. |
| 37 | S&F for Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars,stiffeners, gusset plates, etc fixing of MS plate and like. complete all as specified and directed. |
| 38 | S&F for mild steel screw bolts machine made with hexagonal or square heads at one ends and secured to other other or screwed both ends to be fitted washer and one hexagonal nut exc 10 cm but n, exc 15 cm dia 16 to 20 mm complete all as specified and directed. |
| 39 | M&L for PCC 40 mm thick floor type B-0 1:2:4 (using 12.5 mm stone aggregate) surface fair and even laid in pannel complete all as specified and directed |
| 40 | M&L for Granolithic concrete 1:1:2 floor topping 30 mm thick; laid over cement concrete subfloors etc. and finished to an even and fair surface incl Wearproof topping of 20mm thick as specified (incorporating an approved metallic floor hardner), laid on concrete floors and pavings, and finished even and smooth (incl metallic hardner as per specification of SSR Part-I/Manufacturer instruction complete all as specified and directed. |
| 41 | S&F in repair plastic dividing strips of 38mm wide and 1.5mm thick for laying floor pannels complete all as specified and directed |
| 42 | M&L for Cement concrete work in pavement / hard-standing of flexural strength 40kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete less then 25 cm incl forming 12 mm thick spunch and joint filled wirh pre form bitumen filler and top 30cm primed and sealed with sealing compound complete all as specified and directed |
| 43 | M&L for Forming mortice holes, n exc. 50 cu cm for balusters, newels, rag-bolts, etc. and grouting with cement mortar 1:2 after balusters, etc. are fixed complete all as specified and directed |
| 44 | Schedule of credit of Amount Rs. 94,350.00 to be deducted during AOC. Please Enable Macros to View BoQ information |
