|
| 1 | Lifting up submersible pump set of any capacity alongwith 150mm bore fMS/GI column pipe flanged from bore well upto 50m depth at different locations including PVC submersible copper conductor cable of size upto cross-sectional area 25 Sqmm, 3 core and dismantling cable joints etc, complete all as specified and directed . Note : (i) Submersible cable, column pipes to be stacked at a suitable place at TW/pump house for inspection preparing new zinc (or galvanised) surfaces to receive painting, by coating with mordant solution including washing and cleaning, etc and painting with two coats of synthetic enameled paint.. (ii) All T&P shall be arranged by the contractor.(iii) All items taken out from TW/Pump Houses shall be kept in well secured places and shall be the responsibility of the contractor till the machines are not made functional. |
| 2 | All as per Item No 1 here-in-before but 50mm bore MS/GI column pipe flanged |
| 3 | Lowering submersible pump set of any capacity alongwith MS/GI column pipe flanged 150mm dia from bore well upto 50m depth at different locations including PVC submersible copper conductor cable of size upto cross-sectional area 25 Sqmm, 3 core making flanged joints, cable connections and providing binding dori for fixing and packing of submerssible cable etc, after necessary repair, overhauling and replacement of parts etc complete all as specified and directed . (Note:- Overhauling, repair and replacement of parts shall be paid for separately |
| 4 | All as per Item No 3 here-in-before but 50mm bore MS/GI column pipe flanged |
| 5 | Dismantling of Motor pump set for inspection and identification of serviceable and unserviceable parts for repair and overhauling and reassembling after replacement of unserviceable parts complete upto 25-50 HP submersible pumping set all as specified and directed . Make of pumps :- Calama/BS/ kirloskar/CRI/Amrut/SSI.Note:- (a) Rate quoted for the this item shall include labour charges for the refixing of serviceable parts and fixing of new parts. (b) Spare parts shall be measured and paid seprately under supply only item Ser No 6 to 22 |
| 6 | Supply only bown bush G.M suitable for 30-50 HP pump. |
| 7 | Supply only cable guard suitable for 45-50 HP Pump |
| 8 | Supply only spacer sleeve suitable for 30-50 HP pump |
| 9 | Supply only stainless steel stud suitable for 30-50 HP pump |
| 10 | Supply only G.M enclsoed type Impeller suitable for 30-50 HP pump |
| 11 | Supply only bowl for stages suitable for 30-50 HP pump |
| 12 | Supply only internal NRV threaded suitable for 30-50 HP pump |
| 13 | Supply only suction housing suitable for 30-50 HP pump |
| 14 | Supply only rubber ring suitable for 30-50 HP pump |
| 15 | Supply only bearing sleeve (Imp-Imp) suitable for 30-50 HP pump |
| 16 | Supply only N.H. Nut Suc. HSTG/U.B.H suitable for 30-50 HP Pump |
| 17 | Supply only Rotor fitted shaft suitable for 50 HP pump |
| 18 | Supply only Motor pump coupling suitable for 30-50 HP pump |
| 19 | Supply only Rotor fitted shaft suitable for 45 HP |
| 20 | Supply only Thrust bearing 30 to 50 HP pump |
| 21 | Supply only Rotor fitted shaft suitable for 30 HP pump |
| 22 | Supply only Thrust Bearing 10 to 25 HP |
| 23 | M&L for Rewinding of stator 50 HP motor with existing size and gauge of PVC insulated water proof copper winding wire and insulation material complete all as specified and directed. Make of winding wire : Finolex/CCI/KEN. Note : Contracter will ensure Warranty of rewinded motor for 6 month period. Contractor rep will report on all working days to AGE E/M yard for taking complaints.Complaint will be rectified within 48 Hrs. Contractor will be liable for a recovery of Rs. 1000/- for delay in completion of complaint. |
| 24 | All as per Item No 23 here-in-before but of capacity 45 HP motor. |
| 25 | All as per Item No 23 here-in-before but of capacity 25-30 HP motor. |
| 26 | All as per Item No 23 here-in-before but capacity of submersible pumping set upto 7.5 HP capacity. |
| 27 | Supply only stainless steel pump main shaft suitable for and upto 7.5 HP pump set all as per existing size and shape. |
| 28 | Supply only motor pump coupling suitable for and upto 7.5 HP pump set |
| 29 | Supply only impeller all as existing size and shape suitable for submersible pump suitable for and upto 7.5 HP pump. |
| 30 | Supply only PVC bushes suitable for submersible pump upto 7.5 HP |
| 31 | Supply only Submersible cable jointing kit for 6 - 25sqmm 3 core submersible cable. |
| 32 | All as per srl item No 23 above but of capacity up to 7.5 HP motor. |
| 33 | Supply only Rubber gasket with 8 Nos holes made out of 6mm thick superior quality neoprime sheet suitable for 125/150mm bore flange. Please Enable Macros to View BoQ information |
| 34 | Supply only Rubber gasket with 8 Nos holes made out of 6mm thick superior quality neoprime sheet suitable for 125/150mm bore flange. Please Enable Macros to View BoQ information |
