|
| 1 | Demolition of cement concrete in ground floors and pavings n.exc. 15cm thick above or below ground level complete all as specified and directed. |
| 2 | Material & labour for 25 mm thick PCC 1:2:4, typeB-O, using 12.5mm graded stone aggregate finished fair and even etc complete all as specified and directed. |
| 3 | Material & labour for 40 mm thick PCC 1:2:4, typeB-O, using 12.5mm graded stone aggregate as in sub base of floor, surface finished even and smooth without using extra cement, laid in alternate bays, complete all as specified and directed. |
| 4 | Material & labour for 75mm thick cement concrete (1:3:6) type C-2 using 40mm graded stone agg finished even & smooth without using extra cement as in plinth protection including forming joint to full depth at every 3.0m interval and at every charge of direction and filled mixture of bitumen and sand (1:3) by weight, complete all as specified and directed. |
| 5 | Dismantling floor, hearth or wall tiling incl. cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 6 | Material & labour for Non Skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement sand mortar 1:4 complete all as specified and as directed. |
| 7 | Material & labour Non skid ceramic coloured tiles 7mm to 8mm quare / rectangular) area each tiles exc. 0.11sqm but not exc. 0.18 sqm in floors thick in floor etc set & jointed in neat cement slurry and pointed in white cement and pigment over 15mm screed bed or beading layer in CM 1:4 all as spd. and directed by Engr-in-charge. |
| 8 | Material & labour for Non skid ceramic coloured tiles 7mm to 8mm (square/rectangular) area each tiles exc. 0.11sqm but not exc. 0.18 sqm in dado/ skerting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick screed bed in CM 1:4 all as directed and specified. |
| 9 | Material & labour for Glazed ceramic colour tiles of size 300 x 450 x7mm thick in vertical wall etc set and jointed with neat cement slurry and pointed in white or colour cement to match with the colour of tile over and including 10 mm thick backing course in cement sand mortar 1:4 complete as specified and directed. |
| 10 | Vitrified coloured tiles, jointless , light shade of size 600mm x 600mm x 9 to 10 mm thick, as in floors etc bedded & jointed in neat cement slurry over and including 15 mm thick screed bed in cement mortar 1:4 and pointed in white or coloured cement to match the colour of tiles, complete all as specified and directed. |
| 11 | Vitrified coloured tiles,joint less , light shade 600mm x 600mm x 9 to 10mm thick, on vertical surfaces such as skirting / dado etc bedded & jointed in neat cement slurry over and including 10mm thick backing coat of cement mortar 1:4 and pointed in white or coloured cement to match the colour of tiles,complete all as specified and directed. |
| 12 | Rounding to edges of stone slabs one edge, such as in cooking plateform etc. and other similar situation complete all as specified and directed. |
| 13 | Material and labour for 15 to 18 mm thick granite machine cut bedded and jointed with grey cement slurry and pointed with white cement and pigment to match the shade of granite including grinding and polishing in cooking plateform complete over and including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes with C M 1:6 complete all as specified and directed. |
| 14 | Material & labour for mechine cut kota stone slab flooring 20-25 mm thick over 15 mm thick cement screed 1:6 base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 15 | Refixing in same opening shutters of any description exceeding 1 sq.m and not exceeding 2 sqm each complete all as specified and directed. |
| 16 | Supply & fixing Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia15 mm, complete all as specified and directed. |
| 17 | Supply & fixing Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 20 mm, complete all as specified and directed. |
| 18 | Refixing old steel tubing of 15 mm bore and connections in new or old position (walls, ceilings, floors etc.) complete all as specified and directed. |
| 19 | Refixing old steel tubing of 20 mm bore and connections in new or old position (walls, ceilings, floors etc.) complete all as specified and directed. |
| 20 | Taking up or down 15 mm steel tubing and connections including clearing for refixing or removal to store complete all as specified and directed. |
| 21 | Taking up or down 20 mm steel tubing and connections including clearing for refixing or removal to store complete all as specified and directed. |
| 22 | Supply & fixing Vitreous china water closet Orissa pattern long pan size 580x440mm with trap front or back inlet and integral foot rest complete fixed in repair including lime concrete bedding and connection to drain or outgoing pipe and to flushing pipe and anti siphon pipe complete all as specified and as directed. |
| 23 | Supply & fixing for in repair vitreous china wash basin white flat back size 550x400mm including pedestal excluding taps , waste but including brackets as in repair, complete all as specified and directed. |
| 24 | Supply & fixing in repair PVC connection 15mm size with PTMT nuts of length 450mm long complete all as specfied and directed. |
| 25 | Supply & fixing in repair Bib taps cast copper chromium plated fancy type with crutch or butterfly handle screwed for iron pipe or for brass ferrule of 15 mm bore dia complete all as specified and directed.S & F in repair Bib taps cast copper chromium plated fancy type with crutch or butterfly handle screwed for iron pipe or for brass ferrule of 15 mm bore dia complete all as specified and directed. |
| 26 | Fixing in repair Bib taps cast copper chromium plated fancy type with crutch or butterfly handle screwed for iron pipe or for brass ferrule of 15 mm bore dia complete all as specified and directed. |
| 27 | Supply & fixing in repair pillar cock, chromium plated, fancy type for iron pipe or for brass ferrule of 15mm bore dia complete all as specfied and directed. |
| 28 | Supply & fixing in repair 15 mm bore Stop valves, cast copper alloy,screwed down,high pressure,with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 29 | Supply & fixing in repairs Angle stop valve cast copper alloy, with chromium plated capstan head, screwed down, high pressure screwed both ends for 15 mm bore iron pipe or for unions and fixed complete all as specified and directed. |
| 30 | Supply & fixing in repairs Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed. |
| 31 | Supply & fixing stop valve cast copper alloy, fancy type chromium plated with long shank and cup (concealed type) 15 mm bore, screwed down, high pressure, screwed both end for iron pipe or for union complete all as specified and directed. |
| 32 | Supply & fixing repair in 10 ltr low level PVC value less, syphonic action type flushing cistern,white, with ball value, float and handle including brackets all as specified and directed. |
| 33 | Supply & fixing for 32 mm bore low density polyethylene pipe (LDPE) of pressure rating 6 Kgs/cm2 as in waster pipe for WHB and urinal waste pipe complete all as specified and directed. |
| 34 | Material & labour for PVC (SWR) multi floor trap diameter of outlet 75 mm with grating including jointing with solvent cement complete all as specified and directed. |
| 35 | Material & labour for preparation of old decorated plastered surfaces of wall including cornices, pilasters etc and applying one coat of white wash complete all as specified and directed. |
| 36 | NOTE :- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs 1385.00] Please Enable Macros to View BoQ information |
