|
| 1 | Excavation in trenches in soft/loose soil n. exc 1.50 metre wide and n. exc 1.50 metre deep for foundation and n. exc 10 Sqm on plan and n. exc 1.50 metre in depth and getting out complete all as specified and as directed. |
| 2 | Returning filling in, including, spreading, leveling watering and well ramming in layers n exc 25 cm thick each, complete all as specified and as directed. |
| 3 | Removing excavated soil to a distance n,exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and as directed. |
| 4 | M&L cement concrete type D-2 1:4:8 (40 mm graded aggregate) in foundations, filling and mass concrete complete all as specified and as directed. |
| 5 | M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats, wind ties etc. conforming Fe 410 -W (GdeE- 250) qualityA complete all as specified and directed. |
| 6 | S&F, Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 7 | Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding/ ridge to wall, fixed with self tapping screws complete all as specified and directed. |
| 8 | M&L for machine cut cudappa stone slab 20 to 25 mm thick over and including cement screed base 15mm thick in CM 1:6 in floors laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 9 | Painting to new steel surfaces of any description, over 10cm width or girth two coats with synthetic enamel paint over a coat of red oxide primer including preparation of surfaces complete all as specified and as directed. |
| 10 | S&F 15mm dia pillar tap cast copper alloy chromium plated capstan head screwed down high pressure with or without lettered hot or cold with long screw shank and fly nutt screw for iron pipe complete all as specified and as directed. |
| 11 | S&F grating doom 100mm dia CP (Min weight 25 grms) complete all as specified and directed |
| 12 | M&L for glazed ceramic coloured tiles of size 450 x 300 x 6 to 7 mm thick on vertical surface such as skirting/dado etc. ,set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile with & including rendering 10 mm thick cement plaster in cement mortar 1:4 finished rough to fix tiles complete all as specified and directed |
| 13 | Virified Ceramic tiles dark shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15 mm thick screed bed in CM (1:6) complete all as specified and as directed. |
| 14 | M&L for Brick work with old size, sub class 'B' bricks, straight or curved on plan any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed. |
| 15 | M&L Rendering 15mm thick in Cement Mortar 1:4 on Fair Faces of Brick Walls or on Concrete Surfaces plastered Surfaces Finished fair and even complete all as specified and directed. |
| 16 | M&L for rendering 15mm thick on brick work or concrete surface in CM 1:6 finished fair& even surface complete all as specified and directed. |
| 17 | Cutting chases, pinning in. through brick walls and making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed. |
| 18 | M&L for 18-20mm thick black zed granite stone slab machine cut in skirting/dado, cooking platform, jams, pillars, windows cills and the like laid over and including 10mm thick screed bed or backing coat in cement mortar (1:4) and jointed with grey cement slurry and pointed with white cement and with admixture or pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed. |
| 19 | Rounding to edges of stone slabs one edge, such as steps, cooking platform, and other similar situations complete all as specified and directed. |
| 20 | S&F 15 mm dia bib taps cast copper alloy with Chromium plated cruch or butterfly handle scrwed, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 21 | S&F 15mm bore dia angular stop valves chromium plated fancy type, long shank, screwed down , high pressure ,screwed both ends for iron pipe or for union and fixed complete all as specified and directed . |
| 22 | S & F Towel rail 600 mm long and 20 mm dia brass chromium plated D type fixed with screws and wooden or plastic cleats complete all as specified and directed. |
| 23 | S & F gate / globe valves 20 mm bore cast copper alloy screwed both end down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed bore of complete all as specified and directed. |
| 24 | Supply & fixed PVC connection 15 mm size , 450mm long with PTMT adopter,check nuts and washer on both sides complete all as specified and directed. |
| 25 | S&F as Ball valve PTMT 20 mm high pressure with epoxy coated, Aluminium rod & high density plastic ball screwed for iron pipe and fixed (minium wt 210 gm), complete all as specified and as directed. |
| 26 | S & F 32 mm thick PVC waste pipe of minimum length 1 mtr for kitchen sink and WHB etc complete all as specified and as directed. |
| 27 | S&F jet spray with 1m PVC tube (stainless steel), chromium plated for vitreous china padestal pattern water closet complete all as specified and directed. |
| 28 | S&F chromium plated, Toilet paper holder complete all as specified and directed. |
| 29 | M&L for Hardcore of Broken stone or boulders gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 30 | Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed. |
| 31 | M & L for 100mm thick Cement concrete type B-2, 1:2:4, using 40mm graded stone aggregate in subbase complete all as specified and directed. |
| 32 | Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors for 20mm bore of pipe including Brass elbow, Brass Tee, Male threaded brass adaptor, Female threaded brass adaptor and all necessary fittings etc complete all as specified and directed. |
| 33 | Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors for 25mm bore of pipe including Brass elbow, Brass Tee, Male threaded brass adaptor, Female threaded brass adaptor and all necessary fittings etc complete all as specified and directed. |
| 34 | S&F, 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including stack clamp complete all as specified and directed. |
| 35 | S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including stack clamp complete all as specified and directed. |
| 36 | S&F, 75mm bore PVC (SWR) bend, any radius with access door complete all as specified and directed. |
| 37 | S&F, 110mm bore PVC (SWR) bend, any radius with access door complete all as specified and directed. |
| 38 | S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement of 75mm dia complete all as specified and directed. |
| 39 | M&L for preparing new plastered or un-plastered surfaces and applying two coats of oil bound distemper over 1mm thick birla wall care putty over chalk whitining on walls complete all as specified and directed. |
| 40 | M&L applying two coats of exterior emulsion paint over a coat of primer on old decorated surfaces incl preparation of surfaces complete all as specified and directed. |
| 41 | S&F Health faucet brass CP with 1.20M long PVC flexible pipe with Brass/CP check nut and bracket fixed to wall complete all as specified and directed. |
| 42 | S& F 500 ltrs rotational moulded polythine water storage tanks three layered white coloured (cylinder vertical with closed top) hoisted and fixed in position including ball brass valves,high pressure with polythene float and flynut complete screw for iron pipe or brass ferrule complete all as specified and directed. |
| 43 | M&L for PCC 1:3:6 type C2 using 40mm graded stone aggregate, 75mm thick in plinth protection laid in panels and finished even and smooth without using extra cement including necessary form work complete all as specified and directed. |
| 44 | S & F Aluminium powder coated (minimum thickness of powder coating 50 micron) Ventilator louvers type frame top and sides of size 31x42x1.6 mm ( Section No 20558) rectangular tube of size 40x20x2.0mm ( Section No 14019) and middle vertical of size 42x46.20x1.60mm ( section No 20560) and clip for fixing in wiremesh and glass of size 19x17.30x0.90mm ( section No 19360) including rubber gasket, beading, anodised aluminium snap beading, screws, handle,fixing 4.00 mm thick glass frosted glass , 0.36 mm nominal dia wiremesh with necessary rubber beading gasket, Louvers plate etc for Ventilator etc including necessary plaster, painting ,cill and making good to disturbed portion complete all as specified and as directed. |
| 45 | M & L for snap grid false ceiling system of E board exposed suspended system, grid size 600mm x 600mm compressing of GI powder coated Main Runner of dimensions 39mm x 24mm x 0.8 mm thick to be placed in the grid system duly suspended with 4mm dia GI bar hangers fixed with steel dash through fasteners from purlins with butterfly clips (wt-0.007 kg/clip), hold down clips (wt-0.0035 kg/clip), and fixed with pre painted 4mm thick E board of approved design and with provn of light fixture complete all as per manufacturer instructions complete all as specified and as directed. |
| 46 | Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC Sheet & edges will be painted to match with prelam sheet, reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed. |
| 47 | S&F, Factory Made Solid PVC Moulded Door Shutters with wood free EPS 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face with particle board core, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed. |
| 48 | S&F Butt hinges medium weight cold rolled mild steel 100mm long complete all as specified and as directed. |
| 49 | S&F Aluminium anodised barrel tower bolts of extruded section 200mm long complete all as specified and as directed. |
| 50 | S&F Aluminium handles cast type anodised of 150mm complete all as specified and as directed. |
| 51 | S&F aluminium alloy anodized sliding door bolt with hasp, staples (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts or extruded sections or cast aluminium alloy length of bolt 250mm complete all as specified and directed by Engr-in-charge. |
| 52 | M&L for Birck work with Fly ash, old size sub class 'B' bricks of compressive strength not less than 75 Kg/sqcm, straight or curved on plan exc 6 metre mean radius built in cement mortar (1:6) complete all as specified and directed. |
| 53 | M&L for ENDURA of jhonson or equvilent out door tiles 30 cm x 30 cm x 10 mm thick rubberised mould set, jointed and pointed in neat cement slurry and pointed in white on coloured cement to match as in floors etc layed over and including screed bed or bedding layer of cement mortar 1:6, 15 mm thick etc all complete (Make-H & R Johnson, Brand-Endura designer digital series) |
| 54 | Urinal spreader of SS any colour for fixing with 15 mm dia pipe complete all as specified and as directed. |
| 55 | Vitreous China urinal half stall urinal (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, connection pipe, grating and Union for discharge pipe and waste pipe complete all as specified and as directed. |
| 56 | SS Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed. |
| 57 | S&F vitreous china wash basin white size 550 x 400mm Table top excluding taps, waste, chain & plug and porcelain stopper but including brackets, PVC connections 450 mm long all as specified and directed by Engr-in-charge. |
| 58 | S&F for stainless steel chromium plated single lever basin mixer including all necessary fittings comlete all as specified and directed. |
| 59 | Supply & Fixed for Towel Ring complete all as specified and directed. |
| 60 | S&F, in repair, vitreous china rimless single piece WC with with UF soft close seat cover , hinges accessories set (including fixing bolts, flushing cistern and flush pipe) complete all as specified and directed. |
| 61 | S&F for looking mirror of size 5 feet X 3.5feet with designer glass and frame to be fitted with wall including all necessary arrangements and fittings complete all as specified and directed. |
| 62 | S & F for Towel Rack 600mm long with lower hangers complete all as specified and directed. |
| 63 | S&F 18mm thick ply, PVC sheet with prelaminated on one side of approved texture (\\"Celuca Ply of Rajshree make or equivalent in \\"Sintex\\" as approved by GE) as in Kitchen cabinet and cupboard etc (with shelves and partitions) including necessary fittings & fixtures as per manufacturer's instructions complete all as specified and directed. |
| 64 | S&F stainless steel handle senso 150 mm size inclduding all connection fitting as complete all as specified and directed and approved by GE |
| 65 | S&F 50 mm size magnet catcher, cupbord lock, safety type, Aluminium with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 66 | S&F 30 mm wide Steel Continous (piano) hinge, steel bright finish or electro galvanised etc fixed with SS screws complete all as specified and direcated |
| 67 | Dismantling floor, hearth or wall tilling incl cement mortar bedding (But not backing ) and removing serviceable tiles to store and rubbish off the permisses, complete all as specified and as directed. |
| 68 | M & L Virified Ceramic tiles light shade 10 mm thick Doble Charged (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in dado /skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. |
| 69 | S&F Glazed ceramic coloured tiles in vertical surfaces such as DADO etc, 10 mm thick Doble Charged (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, thick set and jointed in neat cement slurry and pointed in white or coloured cement to match, incl 10 mm thick rendering in cm 1:4 as bedding layer of tiles complete all as specified and as directed. |
| 70 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets including E- Grid frame work complete all as specified and directed. |
| 71 | Taking down cement plaster / terrazzo of any description thickness including raking out joints hacking for key scrubbing down with water complete all as specified and as directed. |
| 72 | Demolition of brick work or stone/ boulder masonry built in cement mortar or cement lime mortar complete all as specified and as directed. |
| 73 | M&L for Brick work with sub class ‘B’ brick, straight or curved as plan exc 6m mean radiusbuilt in cement mortar 1:6 complete all as specified and as directed. . |
| 74 | Taking down chowkhats or frame (with shutter w/o taking off shutter from the frame) area exc 1.5 Sqm but n-exc 4 sqm each complete all as specified and directed . |
| 75 | S & F 40 mm thick flush shutters solid core construction with block board core and plywood face panels, commercial type on both sides decorative face veneer with lipping/frame to match supplied and fitted to chowkats complete all as specified and as directed. |
| 76 | S&F, Brass barrel tower bolts of extruded section with length of bolt 300 mm and fixed complete all as specified and directed |
| 77 | S&F, Brass, sliding door bolt with sand or die cast brass hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy with length of bolt 375 mm and fixed complete all as specified and directed. |
| 78 | S&F, 125mm butt hinges extruded brass with mild hinge pin,Type-B-11 complete all as specified and directed. |
| 79 | S&F extruded brass handles, cast/fabricated type, of size 150 mm complete all as specified and directed. |
| 80 | S&F 150mm long floor door stopper of brass body and tongue with hard drawn steel springcomplete all as specified and directed. |
| 81 | M&L for 18/19 mm thick prelaminated particle board interior grade,prelaminated both sides with decorative choice laminaions fixed with screw to timber/steel frame work as in repair complete all as specified and as directed. |
| 82 | Dismantling framed truss n exc 10m etc complete all as specified and as directed. |
| 83 | Dismantling of Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings s in roof coverings complete all as specified and directed. |
| 84 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in brcikwork,concerte ,stone masonary and making good disturbed ground complete all as specified and as directed. |
| 85 | S&F 2nd class hard wood plain, solid, straight, chowkhat and framed, wrought, rebated on the solid, rounded or chamfered, put together with pinned at joints complete all as specified and as directed |
| 86 | S&F Providing and fixing factory made uPVCwhite colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm),Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware.EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated),steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.)(B) Area exceeding 2.00 sqm each |
| 87 | Taking down chowkat (without taking off shutter from frame) n.exc 1.5 sqm each complete all as specified and as directed. |
| 88 | Excavating over areas, n exc 1.5 m deep and getting out in soft /loose soil complete all as specified and as directed. |
| 89 | M&L Two Coats of French polishing on surfaces of any description,width or girth including removing existing paiting on old wooden door and windows cleaning and preparing the surface including a coat of wood filler on old/new works with two or more coats complete all as specified and directed. |
| 90 | S&F 5.5mm thick Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in Each pane complete all as specified and as directed. |
| 91 | S&F 5.5mm thick Sheet glass,ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and as directed. |
| 92 | M&L for 40mm thick plain cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as on flooring, finished even and smooth without using extra cement complete all as specified and as directed. |
| 93 | M&L for resecuring or easing and adjusting without taking down of shutters of any description of area exc. 1.00 sqm but n. exc. 2 sqm each complete all as specified and as directed. |
| 94 | S&F 2nd class hard wood plain, solid, straight, chowkhat and framed, wrought, rebated on the solid, rounded or chamfered, put together with pinned at joints complete all as specified and as directed |
| 95 | Surface excavation , n.exc 30cm deep and averaging 15cm deep and getting out in hard/desse soil complete all as specified and as directed. |
| 96 | Hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface complete all as specified and as directed. |
| 97 | M&L for 100mm thick PCC 1:4:8 type B1 (using 40 mm graded stone aggregate) in floorings including finishing the surface even and smooth using wih out extra cement, laying the top concrete floor complete all as specified and directed. |
| 98 | M&L Roof tiles, Mangalore pattern, interlocking at side joints, laid dry complete all as specified and directed. |
| 99 | S&F Ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in lime mortar 1:3 or cement mortar 1:6 complete all as specified and directed. |
| 100 | S&F as in repairs hydraulically regulated door closer, aluminium body, heavy duty, designation No 3, universal type, suitable for door shutter 851 to 1000mmin width and weighing between 61 Kg to 80 Kg complete all as specified and as directed. |
| 101 | M&L 15 MM thick Toughned glass as in hinged doors, windows,partitions automatic doors and similar work including cutting to shape, drilling holes required.complete all as specified and as directed. |
| 102 | M&L For RCC (design mix )of M-25 grade (20 mm graded stone aggregate) as in Beams cantilevers bressumers, lintel over 1.5 m span complete all as specified and as directed. |
| 103 | Use& Waste Formwork to sides and soffits of floor or roof beams, beam haunch- ings, girders, bressummers, lintels, cantilevers, shelves including sup• ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and as directed. |
| 104 | Re-fixing shutters in same opening including taking down, easing and adjusting of any description of area exc. 1.00 sqm but n. exc. 2 sqm each complete all as specified and as directed. |
| 105 | M&L for RCC design mix M-25 using 20mm graded stone aggregate in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 106 | M&L for RCC design mix M-25 using 20mm graded stone aggregate in Beams, cantilevers, bressummers, over 1.5m span complete all as specified and directed. |
| 107 | M&L for RCC design mix M-25 using 20mm graded stone aggregate in Columns, pillars, piers, posts and struts complete all as specified and directed. |
| 108 | M&L for Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed. |
| 109 | M&L for use and waste of formwork flat surfaces to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed. |
| 110 | M&L for Use and waste of formwork rough finished surfaces to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed. |
| 111 | Mild steel TMT bars 10mm dia & over cut to length, bent to shape required incl cranking bending with0.9 mm dia MS wire (annealed) not less than0.9 mm dia or securing with clips complete all as specified and as directed. |
| 112 | Mild steel TMT bars 6 to 8 mm dia cut to length, bent to shape required incl cranking bending with0.9 mm dia MS wire (annealed) not less than0.9 mm dia or securing with clips complete all as specified and as directed. |
| 113 | Mild steel TMT bars 5mm dia and over upto and incl 10 mm dia in stirrups, spacers and binders complete all as specified and as directed. |
| 114 | M&L for Brick work with old size, sub class 'B' bricks, straight or curved on plan exc. 6m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 115 | 100 mm th PCC 1:4:8 type D2 ( Using 40 mm graded stone agg.)as in sub base of floors complete all as specified and as directed. |
| 116 | M&L for non skid ceramic coloured joint free tiles 7-8 mm thick area of each tile exceedeing 0.18 sqm but n.exc 0.38 sqm (600x600), in floors, set and jointed in neat cement slurry and pointed in white cement to over and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 117 | M&L for non skid ceramic coloured joint free tiles 7-8 mm thick area of each tile exceedeing 0.18 sqm but n.exc 0.38 sqm (600x600), in skirting / vertical surface set and jointed in neat cement slurry and pointed in white cement to over and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 118 | M&L for PCC 1:2:4, type B-1 using 20 mm graded stone aggregate as in coping, benching, bed block, lintel band, plinth courses etc and similar work including necessary form work complete all as specified and directed. |
| 119 | M&L for mild steel framed work such as grills, gratings, etc. with ends of bars, shouldered and/or riveted, or forged into spikes, framed guard bars etc and similar work conforming to Fe-290 (Gde-E-165) including applying one shop coat of red oxide primer complete all as specified and directed |
| 120 | M & L for Granite (Black/Ruby Red ) work (table rubbed and polished) 20 mm thick in cooking platforms incl edge moulding & cutting holes for gas pipe through drill machine and jointed with grey cement slurry and pointed to match the shade of granite stone including grinding and polishing fixed over and including screed bed 15 mm thick in CM 1 : 6 etc complete all as specified and as directed. |
| 121 | Preparation of new plastering surfaces of walls and applying two coats of cement base paint complete all as specified and as directed. |
| 122 | S&F fancy type draphery rods with two way wooden/brass brackets 20-25mm bore cut to length as reqd of colour as selected , approved by GE & as directed by Engr-in -Charge. |
| 123 | Mild steel framed work for door chowkhats framing for cladding, glazing and like; cut to shape including bending and welding as necessary with complete accessories required for fixing chowkhat as well as for hard ware fittings, complete all as specified and directed.Note: All connected MS works shall be measured under this item except butt hinges which shall be measured and paid for separately as supply only. |
| 124 | S & F 35 mm thick factory Made moulded glazed/gauged door with pre pressed lamination on both side, solid core construction & prepaid to receive glass/wire mesh including fixing of SS wiremesh of nominal dia 0.36 mm , 2 Nos door Aluminium handle, 0.3 Nos SS butt hing of 100mm , 2 nos Aluminium tower bolt 150mm length in each shutter complete all as specified in SSR Part I and as directed and fitted to chowkhats complete all as specified and as directed. |
| 125 | S & F 35 mm thick Factory made moulded flush door with pre pressed lamination on both side, solid core construction 2 Nos Aluminium door handle, 0.3 Nos SS butt hing of 100mm , 2 nos Aluminium tower bolt 150mm length and 300 mm length Aluminium sliding door bolt in each shutter complete all as specified in SSR Part I and as directed and fitted to chowkhats complete all as specified and as directed. |
| 126 | M&L for preparing new plastered or un-plastered surfaces of walls and applying two coats of oil bound distemper with 2mm thick wall care putty over a coat of chalk whitining on walls complete all as specified and as directed. |
| 127 | S & F Aluminium powder coated (minimum thickness of powder coating 50 micron) Ventilator louvers type frame top and sides of size 31x42x1.6 mm ( Section No 20558) rectangular tube of size 40x20x2.0mm ( Section No 14019) and middle vertical of size 42x46.20x1.60mm ( section No 20560) and clip for fixing in wiremesh and glass of size 19x17.30x0.90mm ( section No 19360) including rubber gasket, beading, anodised aluminium snap beading, screws, handle,fixing 4.00 mm thick glass frosted glass , 0.36 mm nominal dia wiremesh with necessary rubber beading gasket, Louvers plate etc for Ventilator etc including necessary plaster, painting ,cill and making good to disturbed portion complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 128 | S & F Aluminium powder coated (minimum thickness of powder coating 50 micron) Ventilator louvers type frame top and sides of size 31x42x1.6 mm ( Section No 20558) rectangular tube of size 40x20x2.0mm ( Section No 14019) and middle vertical of size 42x46.20x1.60mm ( section No 20560) and clip for fixing in wiremesh and glass of size 19x17.30x0.90mm ( section No 19360) including rubber gasket, beading, anodised aluminium snap beading, screws, handle,fixing 4.00 mm thick glass frosted glass , 0.36 mm nominal dia wiremesh with necessary rubber beading gasket, Louvers plate etc for Ventilator etc including necessary plaster, painting ,cill and making good to disturbed portion complete all as specified and as directed. Please Enable Macros to View BoQ information |
