|
| 1 | M&L for scarifying or picking gravelled, macadam or bituminous macadam surfaces not exc 50mm and area exc 400 sqm ,complete all as specified and directed. |
| 2 | M&L for repair to potholes any depth, not exc 1sq m each including sweeping free from dust and mud, or water, scoring sunkensurfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal),complete all as specified and directed. |
| 3 | M&L for Preparation of black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finnaly fanning the cleaned surface with gunny bags or mechanical blower to remove all loose soil, dirt etc,complete all as specified and directed. |
| 4 | M&L for paving bitumen for applying evenly a priming / tack coat with bitumenious primer VG-10 at 04 kg per 10 sqm,complete all as specified and directed. |
| 5 | M&L for bituminous macadam with 4% binder content by weight of total mix using paving bitumen VG 30 laid rolled and comapcted with 8 to 12 tonne power roller to required chamber and gradient by using self propelling mechanical paver complete ,complete all as specified and directed.Note: (Compacted thickness shall be measured) |
| 6 | M&L for Bituminous premix semi dense asphaltic concrete 30mm consolidated thickness with 5.5% binder content by weight of total mix, using paving bitumen VG 30, rolled and compacted too required camber and gradient , complete all as specified & directed. |
| 7 | M&L for 100mm thickness (Compacted thickness) Moorum/red bajri spread rolled and consolidated to gradient and chamber and complete all as specified. |
| 8 | M&L for premixed sand seal coat Paving bitumen vg.30 with 0.06 cum of sand mixed with 6.8 kg of bitumen applied and rolled to a uniform smooth surface, complete all as specified & directed. |
| 9 | M & L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like not exceeding 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction, complete all as specified and directed. |
| 10 | Supply and fixing metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 ,complete all as specified and directed. |
| 11 | Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions, complete all as specified and directed. |
| 12 | Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed. |
| 13 | Manufacturing, supplying and fixing retro reflective Cautionary /warning sign boards of equilateral triangular shape having each side of 900 mm with support length of 3650 mm and made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing , specification and direction ofEngineer-in-charge. Please Enable Macros to View BoQ information |
