|
| 1 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil : |
| 2 | Providing and laying of Stone solling, Hand packed ,levlling ,filling of voids including all leads , lifts & carriage of same upto site of work complete. |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 5 | Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete |
| 6 | Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material upto all leads as per direction of Engineer-in-charge: In cement mortar |
| 7 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 8 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level : 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 9 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level : Mild steel and medium tensile steel bars. |
| 10 | Providing and laying of PVC conduit pipes of good quality (prince etc) as per directions of Engineer in Charge complete job |
| 11 | Steel work welded in built up sections/framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steelprimer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 12 | Structural steel work in built up sections, trusses and framed work,including cutting, hoisting, fixing in position and applying a priming coat ofapproved steel primer all complete.Welded |
| 13 | Structural steel work in single section, fixed with or without connectingplate, including cutting, hoisting, fixing in position and applying a primingcoat of approved steel primer all complete. |
| 14 | Steel work in built up tubular (round, square or rectangular hollow tubes etc) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes |
| 15 | Chequered precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including cleaning and curing complete on 20mm thick bed of cement mortar 1.4 ( 1 cement : 4 coarse sand). |
| 16 | 12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 coarse sand) |
| 17 | Painting steel work with deluxe multi surface paint ofrequired shade to give an even shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm ofapproved brand and manufacture |
| 18 | Providing and Fixing of tile profile SMP coated sheets colour fixed with polymer coat J or L hooks, bolts and Nuts 8mm dia all complete job (0.5mm thickness). |
| 19 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and asdirected by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. |
| 20 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 500x500 mm |
| 21 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622(thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 22 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): (Imported Wood KD) |
| 23 | Random Rubble masonry with hard stone in foundation and plinthincluding leveling up with cement concrete 1:6:12 (1 Cement : 6 coarsesand : 12 graded stone aggregate 20mm nominal size) upto plinth level andcuring complete with: (Quarry) stone in Cement mortar 1:6 (1 Cement : 6 coarse sand) |
| 24 | Pointing on stone work with cement mortar 1 : 3 (1 cement : 3 fine sand) Raised and cut pointing |
| 25 | Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.35 mm thick Imported Kail Wood |
| 26 | P/F 20 mm thick wooden planks ceiling with MS screws 2nd class kail wood incl. frame work in wood work for closing of cables - complete job ( 2nd class kail wood ) |
| 27 | Taking out doors, windows and clerestory window shutters (steel or wood)including stacking within 50 meters lead : Of area of 3 sqm. and below |
| 28 | Providing and fixing plained eaves boarding. 2nd class Deodar wood |
| 29 | Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0.9 lit/10 sqm over an under shade of primer applied @ 0.75 lit/10 sqm of approved brand. |
| 30 | Renewing glass panes, with wooden fillets wherever necessary : Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm) |
| 31 | Providing and fixing 15cm wide 45 cm overall semi circular plain G.S.sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc.including making necessary connections with rain water pipes complete. 0.63 mm thick with zinc coating not less than 275 gram/m2 |
| 32 | Providing and fixing of tower bolts with necessary screws etc complete job. 150 x 10mm |
| 33 | P/F of handles for doors and windows including necessary screws etc complete: 150mm |
| 34 | P/F of l-drop |
| 35 | Finishing wall with Delux multi surface paint system forinteriors and exteriors using primer as permanufacturers' specifications Two or more coats applied @ 1.25 litre1 Osqm over and including one Coat ofspecial primer applied @ 0. 751itre/1sqm |
| 36 | P/F of wood paneling 10 to 12mm thick including cornice over 12mm thick board in frame work including polishing with two or more coats of touch wood of approved brand –complete job |
| 37 | Providing and fixing of 12mm thick ply boards incl. required frame work of size 2” x 2” of imported wood ceiling etc as directed by site in charge incl. all costs complete job |
| 38 | Providing and fixing of KHATAM BANDI ceiling of first class budloo /fur wood excluding the cost of frame work which is to be paid separately. Panch Murabba including cost of cornice, Polishing etc. all complete |
| 39 | French spirit polishing, Two or more coats on new works including a coat of wood filler. |
| 40 | Engagement of skilled labour for re-fixing of dismantled grill work etc. |
| 41 | Carriage of material from various sources to site of work by M.T |
| 42 | (Stone Aggregate average lead 10 kms) |
| 43 | (Sand average lead 40kms) |
| 44 | Taking / Preparing of Geo Tag photographs before, execution during execution and after execution complete job Please Enable Macros to View BoQ information |
