Tender For Comprehensive Repair & Maintenance To Certain Bldgs Under Bde Hqs & North Zone Shopping Complexes In North Zone Under Ge (North) Binnaguri
Tender Value
40 Lakhs
Estimated cost
Bid Submission
24 Jul 2026
1 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Binnaguri → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Repair & Maintenance To Certain Bldgs Under Bde Hqs & North Zone Shopping Complexes In North Zone Under Ge (North) Binnaguri
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 09-Jul-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 16-Jul-2026 |
| 2 | 16-Jul-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 21-Jul-2026 |
| 3 | 21-Jul-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 24-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkaths or frames exc 1.5 sqm but n.exc 4 sqm (without taking off shutter from the frame) each and removing from the site including dismantling brick work for hold fasts etc complete all as specified and as directed. |
| 2 | Taking down chowkaths or frames n.exc 1.5 sqm (without takingoff shutter from the frame) each and removing from the site including dismantling brick work for hold fasts etc complete all as specified and as directed. |
| 3 | Taking down shutters of any description exc 1 Sqm and n.exc 2.00Sqm each and removing from site complete all as specified and as directed. |
| 4 | S&F 1.25mm thick MS Sheet factory made Pressed steel frames confirming to IS , having profile of size 105 x 60 mm, for doors with one or more rebates including necessary supply and fixing lugs, lock strike plate, etc. 100 mm size hinges,with one shop coat of zinc chromate primer and fixing complete all as specified and as directed. |
| 5 | S&F 1.25mm thick MS Sheet factory made Pressed steel frames confirming to IS , having profile of size 125 x 60 mm, for doors with one or more rebates including necessary supply and fixing lugs, lock strike plate, etc. 100 mm size hinges,with one shop coat of zinc chromate primer and fixing complete all as specified and as directed. |
| 6 | M&L for PCC type C-1, 1:3:6 using 20mm graded aggregate as in bed block for fixing of hold fast, filling concrete in frame filling , gaps in between glazed & flyfproof steel window, cills, railling up to 60 cm in height etc including necessary form work as required all complete all as specified and as directed. |
| 7 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, fixed in opening as specified in SSR Part I, Section 8 complete all as specified and as directed. |
| 8 | S& F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, wood free EPS as per specifications and drawing as specified in SSR Part I, Section 8 complete all as directed. |
| 9 | S&F factory made 35mm thick 2nd class hard wood factory made, plain, framed, panelled shutter (two panel) with lock rails and panel of 9mm BWP comercial ply or 12 mm thick veneered particle board with comercial veneering on both faces. The size of rail and style as per IS-1003 Part-I klin seasoned and chamicaly pressure treated complete all as specified and as directed. |
| 10 | S&F factory made 35mm thick 2nd class hard wood gauged and skeleton shutter open rebated and prepared to received gauge etc (without sash bars) for fly proof door shutter, edges of framing plain, chamfered or rounded, fitted with cut of any mitred beads for securing gauge etc, size of members of shutter as specified in SSR Part-I section 8 clause No.8.23(a) and fitted to chowkats complete all as specified and as directed. |
| 11 | Taking down and Refixing of shutter of any description n.exc 1 Sqm and n.exc 2 Sqm each of same opening including resecuring or easing & adjusting complete all as specified and as direcetd. |
| 12 | S&F aluminium (die cast body) Door closer hydraulically regulated,designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specifed and as directed. |
| 13 | S&F of 100mm Stainless Steel butt hinges, medium weight complete all as specified and as directed. |
| 14 | S&F 150 mm long Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed. |
| 15 | S & F 150 mm long Mild steel pressed handles, oval type, stove enamelled black complete all as specified and as directed. |
| 16 | S&F 150 mm long MS barrel tower bolts stove enamelled black, with bright bolt and fixed complete all as specified and as directed. |
| 17 | S&F aluminium anodised extruded fabricated type handle 150mm long complete all as specified and as directed. |
| 18 | S&F 250mm long Aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and as directed. |
| 19 | S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, including one coat of red oxide primer complete with glazing bars, dovetailed or welded complete all as specified and directed. |
| 20 | Description all as per Item No. 19 above but without glazing bars complete all as Specified and as directed. |
| 21 | S&F steel ventilator top hung shutter including hinges, steel peg stay, fixing lugs etc complete with or without glazing bars incl taking down of old steel ventilators of any size complete all as Specified and as directed. |
| 22 | M&L for mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as Specified and as directed. |
| 23 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as Specified and as directed. |
| 24 | M &L Rolled mild steel joist, channel, angle or tee section fixed independently without connecting plate etc confirming to Fe410-W(Gde E-250, quality A). complete all as specified and as directed. |
| 25 | M&L Roof trusses (framed), trussed, purlins,rafter, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel, tubular or flat sections) including distance pieces, cleats, plate etc.confirming to Fe-410w(Gde E-250, quality A) complete all as specified and as directed. |
| 26 | M&L Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled forfixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed. |
| 27 | M&L preparation of new of previously untreated steel and Iron surface of any description, not otherwise described over 10 cm width or girth and applying two coats of Synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed. |
| 28 | M&L preparation of new or previously undecorated wooden surface of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of Pink primer complete all as specified and as directed. |
| 29 | Hacking out old broken unserviceable glass panes (any thickness, size, quality or description) for metal frame including punching or drilling out old glazing pins/spring clips complete all as specified and as directed. |
| 30 | S&F of 4 mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as apecified and as directed. |
| 31 | S&F 4 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and as directed. |
| 32 | M&L 5.5mm thick sheet glass ordinary quality and glazing in square exc. 0.5 Sqm in each pane as in Aluminium door & windows including necessary aluminium cleats, rubber gaskets etc and making good complete all as specified and as directed. |
| 33 | S&F stainles steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 34 | S&F in repair stainles steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with stainless steel wire staples complete all as specified and as directed. |
| 35 | Demolition of brickwork built in cement mortar including all quions, arches, pillars etc complete all as specified and as directed. |
| 36 | M&L brick works with fly ash bricks old size straight or curved on plain exc mean radius built in cement mortar 1:6 complete as directed. |
| 37 | All as item No. 36 here in before but except bricks complete all as specified and as driected.Note : Serviceable bricks obtained from item No 36 here-in-before. |
| 38 | Taking down cement plaster on wall of any desription including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 39 | M&L for 15mm thick rendering in cement mortar (1:4) on fair faces of brick walls or concrete surfaces in two layers (10mm & 5mm) mixed with water proofing compound by weight of cement or as per manufacturer instructions, finished even & smooth without using extra cement all complete all as specified and as directed. Note. Liquid water proofing compound will be measured and paid separtely. |
| 40 | M&L rendering 5 mm thick cement plaster on ceiling cement mortar (1:3) finished even & fair without using extra cement complete all as specified and as directed. |
| 41 | M&L for rendering 15 mm thick cement plaster on other than fair surfaces of brick work in cement mortar (1:6) finished even & fair without using extra cement complete all as specified and as directed. |
| 42 | Supply only liquid water proofing compound complete all as specified and as directed. |
| 43 | M&L preparation of new surfaces and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed. |
| 44 | M&L preparation of newly ceiling plastered surfaces and applying three coats of white wash on wall as specified and as directed. |
| 45 | M&L for preparation new internal wall surfaces and apply two coats of 1st quality acrylic distemper (ready mixed) having VOC content less than 50gms/ltr of approved shade and colour over a coat of primer complete all as specified and as directed. |
| 46 | M&L for preparing of old surfaces of walls and applying one coat of distemper oil emulsion complete all as specified and as directed. |
| 47 | M&L washing,rubbing down and scraping of old decorated surface and preparation of old ceiling plastered surfaces for applying two coats of white wash on wall as specified and as directed. |
| 48 | M&L complete removal of existing treatment from old surfaces of wall and applying two or more coats 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed. |
| 49 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises including taking down cement plaster. |
| 50 | M&L non skid coloured joint free ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but n. exc. 0.18 Sqm, in floors etc. set and jointed in neat cement slurry over 15mm thick screed bed or bedding layer in cement mortar (1:6) as in floor and pointed in whiter or coloured cement to match as in floor complete all as specified and as directed. |
| 51 | S&F Dark Shade/Double charged/ultracharged Vitrified ceramic tiles 10mm thick (Square/rectangular) area of each tile exceeding 0.36 Sqm but not exceeding 0.42 Sqm, in floors etc set and jointed in neat cement slurry over 15mm thick screed bed or bedding layer in cement mortar (1:6) as in floor and pointed in whiter or coloured cement to match complete all as specified and as directed . |
| 52 | S&F Dark Shade/Double charged/ultracharged Vitrified ceramic tiles 10mm thick (Square/rectangular) area of each tile exceeding 0.36 Sqm but not exceeding 0.42 Sqm, in skirting etc set and jointed in neat cement slurry over 10mm thick screed bed or bedding layer in CM (1:4) and pointed in whiter or coloured cement to match complete all as specified and as directed. |
| 53 | S&F coloured non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc set and jointed in neat cement slurry over 15mm thick screed bed or bedding layer in CM (1:6) as in floor and pointed in whiter or coloured cement to match complete all as specified and as directed. |
| 54 | M&L for non skid coloured joint free ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but n. exc. 0.36 Sqm, in skirting etc. set and jointed in neat cement slurry and pointed in whiter or coloured cement to match including screed bed or beded layer 10mm thick in cement 1:4 complete all as specified and as directed. |
| 55 | M&L Glazed ceramic coloured tiles/digital elevation tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed white or colour cement to match including screed bed or beded layer 10mm thick in cement moratr 1:4 as specified as directed. |
| 56 | M & L for 15 to 18 mm thick granite (of any type) work (table rubbed and polished) in steps, Jambs, pillars, window cills, cooking platforms,corner shelf,Flat shelf and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including 20 mm thick screed bed (1:6) including rounding the exposed surfaces of granite complete all as specified and as directed. |
| 57 | M&L pre-polished and chemically treated smooth finish exterior grade coloured chequered tile for size 300 mm x 300 mm x 25mm thick, set, jointed and pointed in neat cement slurry in floors including 15mm thick screed bed or bedding layer in cement mortar (1:6) as in path all as complete and as specified and as directed. |
| 58 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed. |
| 59 | Demolition of cement concrete (un-reinforced ) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) all as specified and as directed. |
| 60 | M&L for 75mm thick cement concrete (1:3:6) type C-2( using 40mm graded crushed stone aggregate) as in plinth protection laid in alternate bays (not exceeding 2 Sqm each) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 86/25 grade and three parts of sand by weight complete all as specified and as directed. |
| 61 | M&L cement concrete type C1 1:3:6 with 20 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed. |
| 62 | M&L PCC 1:2:4 type B-I ,(using 20 mm graded stone aggregate) as. in coping /benching to sides of foot path including weathering, slightly rounded or chamfered edges & fininished fair and even etc complete all as specified and as directed. |
| 63 | M&L for 75 mm thick cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in path /steps laid with and and finishing the surface even and rough to receive the topping layer or tiling complete all as specified and as directed. |
| 64 | Taking up or down steel tubing and connections, 15 mm bore complete all as specified and as directed. |
| 65 | S&F of Tubes, medium grade, 15mm bore, galvanised, with all fittings and fixed complete to wall and ceilings or laid in floors complete. |
| 66 | Refixing of old steel tubing and conections in new or old position (wall, ceiling, floors, etc) of 15 mm bore including cleaning pipes complete all as specified and as directed. (Serviceable pipe obtain from item No 65 here-in-before. |
| 67 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing etc., and making good, cutting not exceeding 10 cm girth in brick walls complete all as specified and as directed. |
| 68 | Taking up or down steel tubing and connections, of 20 mm bore complete all as specified and as directed. |
| 69 | S&F of Tubes, medium grade, 20 mm bore, galvanised, with all fittings and fixed complete to wall and ceilings or laid in floors complete all as specified and as directed. |
| 70 | Refixing old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) including cleaning of pipes complete all as specified and as directed.( Serviceable pipes obtained from item No 69 here-in-before). |
| 71 | Dismantling water tank exc 500 & 1000 ltr capacity complete all as specified and as directed. |
| 72 | S&F PVC water storage tank 500 ltr capacity HDPE double layered , cylindrical type fixed and hoisted in position on roof at any height complete with inlet/outlet of 20 mm GI Pipe connection incl locking arrangement, including 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 20 mm - 210 gms ) complete all as specified and as directed. Note : (i) GI inlet, outlet & wash out pipe will be measured paid for separately. |
| 73 | S&F PVC water storage tank 1000 ltr capacity HDPE double layered , cylindrical type fixed and hoisted in position on roof at any height complete with inlet/outlet of 20 mm GI Pipe connection incl locking arrangement, including 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 20 mm - 210 gms ) complete all as specified and as directed.Note : (i) GI inlet, outlet & wash out pipe will be measured paid for separately. |
| 74 | S&F in repairs 15 mm dia Bib tap, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. |
| 75 | S & F in repair concealed stop cock CP, cast copper alloy fancy type with long shank and cup complete all as specified and as directed. |
| 76 | S&F in repairs 15mm bore PVC connections with PTMT nuts of length 450mm complete all as specified and as directed. |
| 77 | S&F in repair 15 mm dia brass chromium plated angle cock with flange complete all as specified and as directed. |
| 78 | S&F in repair vitreous china wash basin, white, flat back of size 550x 400 mm including cutting for and pining, in ends of brackets or erecting stand, including PVC connection 15mm size with PTMT nuts, 450mm length and 32mm bore 900mm long corrugated waste pipe complete all as specified and as directed. |
| 79 | S & F in repairs Vitreous China Ware Wash hand basin white,table top of size 600x400x160 mm including CP waste coupling, PVC connection 15mm bore 450 mm long, 32mm bore 900mm long corrugated waste pipe complete all as specified and as directed. |
| 80 | S&F in repairs 15 mm bore pillar taps, swan neck type with standared size capstan head, cast Copper alloy, chromium plated, screwed down high pressure with or without lettered ‘HOT’ or ‘COLD’ long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed. |
| 81 | S&F in repair 600mm x 450 mm beveled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 82 | S&F vitreous China squatting pan Orissa\\" pattem size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) with 'P' or 'S\\" trap from or back inlet etc including connection to trap and flushing pipe and provision of 100mm thick cement concrete using type E2 1:5:10 bedding debries of the site including dermoliation of existing unserviceable squatting pan including concrete and removing debries of the site complete all as specified and as directed. |
| 83 | S&F in repair Vitreous China, pedestal pattern white (excluding fixing bolts, flushing cistem and flush pipe) including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed. |
| 84 | S&F in repair 10 ltr capacity PVC flushing cistern low level white colour with inlet ball valve float and handle including brackets, flush pipe, including PVC connection 450 mm long, PVC flush pipe of reqd length ,and connections to pipe etc complete all as specified and directed. |
| 85 | S&F in repair Vitreous China Urinal, Half stall type, white with flush pipe,connecting pipe & waste pipe, CP urinal spreader complete all as specified and as directed. |
| 86 | S & F grating doom 125mm dia with waste hole of PTMT (min wt 40 gms) complete all as specified and as directed. |
| 87 | Taking down PVC/AC pipe of any dia & any description incl all fittings complete all as specified and as directed. |
| 88 | S&F 110 mm dia PVC SWR pipes single socketed in any length with rubber ring joints, fixed to wall or laid in floors complete all as specified and as directed. |
| 89 | S&F 75 mm dia PVC SWR pipes single socketed in any length with rubber ring joints, fixed to wall or laid in floors complete all as specified and as directed. |
| 90 | S&F 110mm dia PVC SWR bends of any radius with out access door complete all as specified and as directed |
| 91 | S&F 110mm dia PVC (SWR) junction single 'T' equal or unequal with access door Complete all as specified and as directed. |
| 92 | S&F 110mm dia PVC (SWR) branch piece, single ‘Y‘ equal or unequal Complete all as specified and as directed. |
| 93 | Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 94 | M&L RCC type B1 (1:2:4) using 20 mm graded aggregate in Fins, fascias, louvres, parapets, chajja/sunshade, shelves and railings , newels, balustrade & the like |
| 95 | Formwork to Fins, fascias, louvres, parapets, chajja/sunshade, shelves and railings , newels, balustrade & the like Fair finished surfaces of concrete flat complete |
| 96 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 97 | Taking down tarfelt with cement plaster from roof surfaces and lowering and removing the same from site including roughening of old concrete suirface of roof by wire brushing and cleaning the surface to remove all loose dust etc complete all as specified and as directed. |
| 98 | M&L for 10mm thick screed bed or bedding layer in cement mortar (1:4) mixed with WPC as per manufacturer's instruction in order to maintain proper slope over existing roof surfaces for applying, finished even and smooth without using extra cement complete all as specified and as directed.Note: Water proofing compound will be measured and paid separately under relevant item of this schedule. |
| 99 | M&L PCC 1:2:4 Type B-1 (20mm graded aggregate) provinding as in road kerbs or mud steps and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed. |
| 100 | M&L water proofing treatment to RCC roof slab, including parapet comprising with the following course of treatment/specification from bottom to top (i) Cleaning of old concrete surfaces of roof, picking sweeping cleaning the surface to remove all loose dust and thoroughly washing down with clean water and dried complete(ii) Applying one coat of bituminous primer @ 0.40 Ltr/Sqm.(iii) Supply and laying 3mm thick APP based olymeric membrane of approved manufacturer with weight not less than 3.60 Kgs per Sqm, reinforced with non-woven polyester febric weight not less than 150gms per Sqm. Polymeric membrane shall be taken to a height as required at site/30cm(minimum) and than inserted inside the groove of parapet wall and shall be finished by a membrane flashing.(iv) One coat of Solar reflective bituminious Aluminium paint of approved brand to be provided over the APP membrane as per manufacturers instructions.Note : (a) Work shall be carried out through specialized applicator approvrd by GE. Contractor shall submit sufficent documents/Credentials in support of Applicator whom he wants the work excuted.(b) Laying APP based polymeric membrane shall be done torch on method as per manufactures instructions. (c) A minimum overlap of 100mm and 75mm should be made at the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as per manufacturers instruction. |
| 101 | S&F Powder coated aluminium window sliding type three track (2 glazed & one gauze shutter ) aluminium sections weighing not less than 1.67kg/m for frame and 0.55 kg/m for shutter including necessary jointing cleats, glazing cleats, rubber packing , screws, handle, locking arrangement and 5.5mm thick plain/tinted glass and aluminium mosquito proof gauge including taking down of old existing steel window and making good disturbed surface of wall complete all as specified and as directed. |
| 102 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed. |
| 103 | S&F for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and as directed. |
| 104 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof , to wall,ridges fixed with self tapping screws as specified and as directed. |
| 105 | Demolition of wall and ceiling board (Fibre,pulp,insulation etc.) or insulation board /slab/blankets any thickness including cover fillet |
| 106 | Supply & fixing false ceilling with Gl powder coated frame work and 4 mm thick,(E-board) non asbesto fibre reinforced cement board, reinforced design board tiles conforming to IS-14862,of approved texture at aii height duly suspended ceilling laid on hot dip galvanised iron imposed drid of size 600 mm x600 mm ,T section/ Angle section including cutting holes in brick wall and making good surface with cement concrete 1:2:4 type B-0/1:3 cement mortar complete all as specified and having following details.(a) 27mm x 27mm angle 0.55 mm thickness,GI powder coated hot dip glvanised plugged at the rate 600mm centreto center alongwith te perimeter of wall.(b) 25 mmx 25 mm Tee 0.55 mm thickness,GI powder coated hot dip galvanised as main and cross runner suspended with 1.6 mm dia GI wire suspendrs (not exc 1.2 mtr length) with ajustable clamps and dash true fastners plugged in RCC slab or angle iron runner of slopped roof placed at the rate 600 mm centre to centre alongwith the premeter of wall.Note : The work shall be carried out as per manufacturer instruction and as directed. |
| 107 | S&F for Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specificationsand drawing complete all as specified and as directed. |
| 108 | S&F for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and as directed. |
| 109 | S&F powder coated anodized aluminium door made out hollow extruded aluminium sections as mentioned below. Each door having 02 Nos disk or D type handles of 200mm long, 02 Nos aluminium tower bolt of 200mm size, 1 no mortice lock of six levers with key in duplicate regulated by double acttion hydroulic floor door spring (Make Sandhu /Titz ) shutter to be paterly glazed with 5mm thick tinned glass and partly panelled with 12mm thick prelaminated particle board fixed with glazing clips rubber beading /gasket anodized aluminium beading screws complete including taking down old unserviceable shutter with frame (a) Chowakat frame : 100 x44 x1.60 mm(b) Shutter verticle style : 100 x44 x1.60 mm(c) Shutter lock rail : 150 x44 x1.60 mm(d) Shutter Top rail : 100 x44 x1.60 mm(e) Shutter bottom rail : 200 x44 x1.60 mm |
| 110 | S&F in repair CP health faucet (ABS body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 m long flexible tube and ABS wall hook in cluding making connections and fixed in position complete all as specified and as directed. |
| 111 | S&F brass chromium plated fancy type towel rail 600 mm long complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 21, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 16, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jul 21, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jul 24, 2026
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 1 dayJul 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayJul 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender