Defence Statutory Bodies & Commissions/Committees Closing in 0 days TDR #56045592

Tender For Maintenance Of E/S And W/S Installation In Akhnoor Mil Stn Under Ge (S) Akhnoor.

Issued by Statutory Bodies & Commissions/Committees · Akhnoor, Jammu and Kashmir
Tender Value
26 Lakhs
Estimated cost
Bid Submission
09 Jul 2026
0 days left
EMD
52000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Akhnoor → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Maintenance Of E/S And W/S Installation In Akhnoor Mil Stn Under Ge (S) Akhnoor.

BOQ

Name of Work:- MAINT OF E/S AND W/S INSTALLATION IN AKHNOOR MIL STN UNDER GE (S) AKHNOOR.
Sl. No. Item Description
1Dismantling plain or corrugated steel sheeting any gauge, thickness, including nainital or similar pattern roof coverings, complete all as specified and directed.
2Dismantling AC corrugated, semi corrugated sheets in roof covering, complete all as specified and directed.
3M&L for pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick in ridges of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.
4M&L for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.
5Dismantling timber scantlings 40 sq.cm and over in section, in any position, complete all as spd and directed.
6Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.
7S&F for mild steel structural steel work as in roof trusses any description of steel member purlins, crane gantries, rails and fastening and heavy brackets (Beam, tee, angle, channel or hollow steel section) including distance pieces, cleats etc confirming to Fe-290-W (Gde-E-165), complete all as specified and directed.
8Demolition of cement concrete (unreinforced) any type and in any position not otherwise specifically provided from, complete all as specified and directed.
9M&L for plain cement concrete 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) in surface channels and drains, complete all as per specified and as directed.
10M&L for extra for forming fair finished drain or channel 30cm inner grith in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc., complete all as specified and directed.
11Demolition brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work and precast concrete articles, complete all specified and directed.
12M&L for brick work with sub class 'B' bricks old size straight or curved in plane exc 6m mean radius built in cement mortar 1:6, complete all as specified and directed.
13Description all as per Serial item No. 12 here in above but except brick complete all as specified and directed.
14Taking down cement plaster from brick or stone walls, ceiling etc including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed.
15M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces of wall, finished even & smooth without using extra cement, complete all specified and directed.
16M&L for rendring 15mm thick in cement mortar 1:6 on fair faces of brick/concrete surfaces of wall finished even and smooth without using extra cement, complete all as specified and directed.
17M&L for applying wall putty 2mm thick over & above, complete treated or untreated surface complete all as specified and directed by Engineer-in-Charge.
18M&L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer, complete all as specified and directed.
19M&L for preparation of newly plastered or unplastered surface of wall and applying two coat of cement base paint, complete all as specified and directed.
20M&L for preparation of newly plastrered surface of any description and applying two coat of exterior emulsion paint as approved over a coat of primer, complete all as specified and directed.
21M&L for preparation of old plastered or painted surfaces of wall by complete removing of existing treatment (scrubbing, washing down etc), complete all as specified and directed.
22M&L for applying wall putty 1mm thick over & above complete treated or untreated surface, complete all as specified and directed.
23M&L for applying one coats of oil bound distemper, complete all as specified and directed.
24M&L for applying one coat of cement base paint on wall of old surfaces, complete all as specified and directed.
25M&L for applying one coat of exterior emulsion paint as approved complete all as specified and directed.
26Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness below or above ground level, complete all as specified and directed.
27M&L for 40mm thick plain cement concrete 1:2:4, type B-1 (using 20 mm graded crushed stone aggte) as in floors finished even and smooth without using extra cement, complete all as specified and directed.
28M&L for 25mm thick plain cement concrete 1:2:4, type B-0 using 12.50 mm graded crushed stone aggregates as in sub floor surfaces, complete all as specified and directed.
29M&L for coloured non skid ceramic tiles 7 to 8 mm thick, edgeless , area of each tile exc 0.11 sqm but n. exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in colored cement to match shade, pattern, laying etc. of tiles as directed at site, including screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:4 complete all as specified and directed.
30M&L for 100mm thick cement concrete type D-2 1:4:8, 40mm graded crushed stone aggregates as in sub base etc. finished surface even and rough without using extra cement, complete all as specified and directed.
31Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & patternover and proper embedding/ laying of inter locking paver blocks into the sand bedding layer and filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweepin, including 50mm sand cushioning and filling of joints by sand under floors including watering and consolidation, complete all as specified and directed.
32Providing and laying at or near ground level precast kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening and excavation for embedding inside, complete all as specified and directed.
33M&L for plain cement concrete M-15 1:2:4, type B-1, (using 20mm graded crushed stone aggregate), nominal mix, as in copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including necessary form work, complete all as specified and as directed .
34Dismantling of floor, hearth or wall tiling, stone tiling including cement mortar bedding/backing etc, removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.
35M&L for 18mm thick granite (Lakha red or black as approved) table rubbed and polished in steps, jambs pillars, window cill, cooking platform (in single piece) and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed.
36Providing edge moulding 18mm thick granite stone to counters vanitties etc. including machine polishing to edge to give high gloss finsh etc., complete all as spd and directed.
37M&L for glazed ceramic coloured designer pattern tiles 450mmx300mmx7mm thick on vertical surface such as skirting, dado etc. set and jointed in white colour cement, including rendering 10mm thick in cement mortar 1:3 on fair faces of brick work finished even and fair to receive tiles, complete all as specified and directed.
38M&L for glazed ceramic (stone or wooden textured) coloured tiles n exc 0.36 Sqm 7 to 8mm thick on vertical surfaces such as skirting, dados and rises to steps, walls, columns etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match pattern and inculding rendering 10mm thick in cement mortar 1:3, complete all as specified and as directed.
39Taking up or down 15mm bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed. Please Enable Macros to View BoQ information
40Taking up or down 15mm bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 56045592
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 26 Lakhs
LAST DATE 09-07-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Maintenance Of E/S And W/S Installation In Akhnoor Mil Stn Under Ge (S) Akhnoor.
Basic Detail
Tender No GES/AKH-25/2026-27
Bidding Type Tender
Location
City Akhnoor
State Jammu and Kashmir
Key Dates
Publish Date 18 Jun 2026
Submission Date 09 Jul 2026
Open Date 16 Jul 2026
Finance
Tender Value 26 Lakhs
Tender Fee 500
EMD 52000
Exemption Not Available
Document List
84b7e5e1-2a0a-4a91-a3f9-fe67f56f570f.html
BOQ_865638.xls
TD-25-26-27.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jun 18, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Jul 09, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Today
Jul 16, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 7 days

Tender Documents

Download All (ZIP) ↓
html

84b7e5e1-2a0a-4a91-a3f9-fe67f56f570f.html

xls

BOQ_865638.xls

pdf

TD-25-26-27.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders