|
| 1 | Taking down chowkats or frames with shutters (without taking off shutters from frame) area not exc.1.5 sqm each complete all as specified and directed. |
| 2 | Taking down chowkats or frames with shutters (without taking off shutters from frame) area exc.1.5 sqm and not exc.4 sqm each complete all as specified and directed. |
| 3 | Taking down shutters of any description, area exc.1 sqm and not exc. 2 sqm each complete all as specified and directed. |
| 4 | M&L Providing Factory made 100 % solid wood plastic composite (WPC) door frame, double rebate 125 mm x 65 mm made from wood plastic composite ( Single extruded process) material with density 780 Kg/ Cum, complete all as specified and directed. Note: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement. |
| 5 | M&L Providing Factory made 100 % solid wood plastic composite (WPC) door frame, single rebate100 mm x 65 mm made from wood plastic composite (Single extruded process) material with density 780 Kg/ Cum complete all as specified and directed. Note: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement. |
| 6 | S&F 35mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides including second class hard wood plain cover fillets 30X6mm all around the shutters complete including two coats of synthetic enamal paint over one coat of pink primer complete all as specified and directed. |
| 7 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed. |
| 8 | S&F 2 nd class hard wood 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part I, section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified and directed. |
| 9 | S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 10 | S & F Powder coated anodised Aluminium alloy sections sliding windows with frames Series-C (20mm), 3 track sliding shutters duly fitted with neoprene beading, glazing clips, two shutters tinted glass panes 4.80 mm nominal thickness one shutter with stainless steel wire cloth 0.45mm dia and average width of aperture 1.4mm , aluminium alloy handles etc. complete all as specified and directed. Note : Making all edges i.e. cill and jamb good by cement mortar 1:3. complete all as specified and directed. |
| 11 | M & L Powder coatedaluminium deco grill medium grade of mesh size 75mmx75mm with 6mm square anodised aluminium bars fixed with aluminium frame of size 37x19x2mm complete all as specified and directed. |
| 12 | S&F Powder coated aluminium anodised ventilator with fixed aluminium frame of size 65 x 40 x 1.98mm thick fixed in vertical position with aluminium vertical members and half portion to be provided with 4mm thick pin head glass and remaining portion to be louvered using 4mm thick pin head glass and louvered portion covered with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm incl necessary channel frame work, including rubber gasket and aluminium beading complete all as specified and directed. |
| 13 | S & F Anodised Aluminium partition/ door frame of size 100 x44 x 1.98mm thick with one or more rebates and shutters pull and push type or side hung type (with or without aluminium sash bars) comprising of top & lock rails of section 115 x 44 x 1.98mm thick, bottom rail of section 150 x 44 x 1.98mm thick and stiles of section 85 x 44 x1.98mm thick including necessary jointing cleat, glazing clip, rubber packing anodized aluminium beading, screws, anodized aluminium fittings such as floor spring or hinges 100mm size with hydrolic door closer, handles 'D' type 125mm, floor door stopper, tower bolts 200mm, sliding door bolt 300mm or mortice lock with 5mm thick tinted glass /pre laminted particle board (Novapan) panel and making good to the disturbed wall surfaces to match existing surface complete all as specified and directed. |
| 14 | S & F 5.5mm thickness Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane for aluminium doors complete all as specified and directed. |
| 15 | S & F 4.0 mm thickness Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane for aluminium doors complete all as specified and directed. |
| 16 | All as per item No 15 above but figured glass complete all as specified and directed. |
| 17 | S&F Stainless steel butt hinges 100mm complete all as specified and directed. Note :- All screws shall be self tapping chrome plated and length of screw not less 38 mm. |
| 18 | S&F 200 mm long Aluminium anodised tower bolt ( selected quality as approved ) fixed with self tapping screws complete all as specified and directed. |
| 19 | S&F 250 mm long( selected quality as approved ) stainless steel sliding door bolts, plate type, bright bolt not less than 12mm dia with and incl a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed. |
| 20 | S&F 150 mm long stainless steel Handle ( selected quality as approved ) fixed with self tapping screws complete all as specified and directed. |
| 21 | S&F 300mm size mild steel, ordinary rat tail rod pattern spring (helical door spring) with roller and roller plates including welding to angle iron plate or chowkhats complete all as specified and directed. |
| 22 | S&F in repairs 200 mm long tower bolt (selected quality as approved ) Aluminium anodised fixed with self tapping screws. complete all as specified and directed. |
| 23 | S&F in repairs 250 mm long Aluminium anodised sliding door bolts, (selected quality as approved ) plate type, bright bolt not less than 12mm dia with and incl a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed. |
| 24 | S&F in repairs 150 mm long Aluminium anodised Handle ( selected quality as approved ) fixed with self tapping screws complete all as specified and directed. |
| 25 | S&F in repairs 140 mm size floor door stopper of Stainless steel body and tongue with hard drawn steel spring fixed in floor complete all as specified and directed. |
| 26 | Dismantling floor, hearth or wall tiling including cement mortar bedding removing serviceable tiles and rubbish off the premises etcand removal of rubbish/ demolished materials out of MD land complete all as specified and directed. |
| 27 | M & L 75mm thick PCC (1:2:4) type B 2, (using 40mm graded stone aggregate) as in sub base floor complete all as specified and directed. |
| 28 | M & L Applying tile adhesive of 10 mm thick below surface including roughening/chipping floor surface as per manufacturers instructions complete all as specified and directed. |
| 29 | M&L Non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding exc. 0.06 sqm but not exc. 0.11 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles. laid over and including 15 mm thick screed bed of CM (1:6) complete all as specified and as directed. |
| 30 | M&L Coloured Vitrified Double Charged tiles 8 to 10mm thick (square/rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.36 sqm as in floor,skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles laid over and including 15 mm thick screed bed of CM (1:6) complete all as specified and as directed. |
| 31 | M&L Glazed coloured ceramic tiles of size 450 x 300 x 7mm thick, on vertical surfaces of walls such as skirting dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match laid over and including 10 mm thick backing coat in CM (1:4) complete all as specified and as directed. |
| 32 | M&L 18 to 20mm thick granite (of any type) work ( table rubbed and polished) in steps , jambs. pillars, window cills, cooking platforms and like laid over and including 15mm thick screed bed of (1:4), pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete complete all as specified and directed. |
| 33 | Labour only for full round moulding to 18 to 20mm thick granite slab. Complete all as specified and directed. |
| 34 | S&F Rotational moulded polyethylene water storage tank 3 layer white colour waterr tank , non- toxic effect, algea formation protection (made from Virgin grade of polyetjylene material which is duly stablized with anti-oxidentPlastic) of capacity 1000 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer, 20mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 210gms) complete including dismantling existing water tank complete all as specified and directed.Make: Cat No. HSWS-0100-01-Pure of M/s Sintex |
| 35 | S&F in repair 20mm bore tubes uPVC pipes SDR 11 & Plain uPVC SDR 11 fittings all fittings short pieces and fixed complete to walls, floor, ceiling etc all including taking down existing G I tubing complete all as specified and directed. |
| 36 | S&F in repair 25mm bore tubes uPVC pipes SDR 11 & Plain uPVC SDR 11 short pieces and fixed complete to walls, floor, ceiling etc all including taking down existing G I tubing complete all as specified and directed. |
| 37 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc.complete all as specified and directed. |
| 38 | S&F 110mm dia PVC (SWR) single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors. complete all as specified and directed. |
| 39 | S&F 75mm dia PVC (SWR) single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors. complete all as specified and directed. |
| 40 | S&F 110mm dia PVC (SWR) single socketed pipes in any length complete with rubber ring joints fixed to walls. complete all as specified and directed. |
| 41 | S&F 75mm dia PVC (SWR) single socketed pipes in any length complete with rubber ring joints fixed to walls.complete all as specified and directed. |
| 42 | S&F 50mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls.complete all as specified and directed. |
| 43 | S&F in replacement PVC (SWR) floor trap 75mm dia of outlet, plain with CP grating including jointing with solvent cement to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 44 | S&F CP grating round 100mm/75 mm size with/without hole. complete all as specified and directed. |
| 45 | S & F in repair for PVC (SWR) bends any radius of 110mm bore. complete all as specified and directed. |
| 46 | S & F in repair for PVC (SWR) bends any radius of 75mm bore. complete all as specified and directed. |
| 47 | S & F in repair for PVC (SWR) branch piece, single Y, equal or unequal for 110mm bore pipe complete all as specified and directed. |
| 48 | S & F in repair for PVC (SWR) branch piece, single Y, equal or unequal for 75mm bore pipe complete all as specified and directed. |
| 49 | S & F in repair for PVC (SWR) junction single (single ‘T’) equal or unequal with access door for 110mm bore pipe complete all as specified and directed. |
| 50 | S & F in repair for PVC (SWR) junction single (single ‘T’) equal or unequal with access door for 75mm bore pipe complete all as specified and directed. |
| 51 | S & F in repairs 110 mm bore PVC (SWR) door bends any radius. complete all as specified and directed. |
| 52 | S & F in repairs 75 mm bore PVC (SWR) door bends any radius. complete all as specified and directed. |
| 53 | S & F 450 mm long PTMT Shelf fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and directed. |
| 54 | M&L Cutting chases pinning in brick work for concealing water tubing and making good to facing where required and pointing in cement motar 1:3, cutting n.exc. 10cm girth complete all as specified and directed. |
| 55 | S&F in repair Vitreous China squatting pan Orissa pattern size 580 x 440mm white with integral foot rest ( excluding flushing cistern and flush pipe), including PVC P-trap 100 mm dia including making good to floor complete all as specified and directed. |
| 56 | S&F in repairs Vitreous China wash down water closet pan (pedestel pattern) white,including trap connection to drain (outgoing pipe) and to flushing pipe, antisyphonage pipe, including 600mm long PVC connection with PTMT nuts and plastic water closet seat of white in colour, back closed pattern with flat bottom,and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified and directed. |
| 57 | S&F in repairs Vitreous china wash down rimless wall hung WC inbuilt jet with PP soft close seat cover, hinges, fixing accessories and accessories set, size 385X720X710mm, S trap 300mm, flushing cistern with cistern fittings complete all as specified and directed. Make :- Jaquar Cat No.ONS-WHT-10853S300UFSM |
| 58 | S&F in repair vitreous china wash hand basin white of bowl size 550 x 440mm including waste coupling and PVC waste pipe, 32mm dia, 15 mm dia bore pipe pillar tap cast copper alloy with capstan heads chromium plated fancy type, to be fixed with M S brackets complete all as specified and directed. |
| 59 | S&F in repair 10 ltr capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve float and handle including brackets and PVC flushing pipe of polyethylene of low or high density or PVC 32mm dia complete all as specified and directed. |
| 60 | S & F in repairs cascade type syphon-set any size incl all other accessories complete all as specified and directed. |
| 61 | S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified complete all as specified and directed. |
| 62 | S&F PVC connection 15mm bore size with two nuts and washers of length 450mm complete all as specified and directed. |
| 63 | S&F in repair Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including 32mm dia waste pipe and CP grating and bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 914mm x 460mm, bowl size 405mm x 330mm x 160mm complete all as specified and directed. |
| 64 | S&F in replacement stainless steel plate rack of size 609mm X 762 X 254 mm complete all as specified and directed. Make: Blue star |
| 65 | S & F in repair brass Chromium plated soap dish , fixed to wall with CP brass screws complete all as specified and directed. |
| 66 | S&F in repairs 15 mm dia bib cock long nose quarter turn with flange fancy type brass CP with, screwed for iron pipe or brass ferrule complete all as specified and directed. |
| 67 | S&F in repairs 15 mm dia bib tap standard of PTMT any colour minimum weight 90 gram ISI Marked complete all as specified and directed. |
| 68 | S & F 15 mm dia Stop valves,Chromium plated fancy type quater turn screwed down, high pressure,screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 69 | S & F 15 mm dia stop valves,concealed type quater turn,chromium plated fancy typescrewed down, high pressure,screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 70 | S & F in repairs 15mm Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms) complete all as specified and directed. |
| 71 | S & F in repairs 15mm Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-110gms) complete all as specified and directed. |
| 72 | S&F in repairs 32 mm dia bore PVC flexible pipe for wash hand basin complete all as specified and directed. |
| 73 | S & F in repairs for hand shower chromium plated (health faucet) 15 mm bore, (ABS body) with 8mm dia. of 1 metre long tube & wall hook. Complete all as specified and directed.Make: Cat No - ALD-CHR-573 of Jaquar or of equivalent model in ROCA/KOHLER |
| 74 | S&F in repairs 15 mm dia Two Way (2 in 1) bib taps with wall flange quarter turn fancy type brass CP, screwed for iron pipe or brass ferrule. Complete all as specified and directed. Make: CERA F1020163or equivalent model in Parryware/Hindware |
| 75 | S & F 18 mm thick UV coated exterior grade MDF board duly edge banded with 0.8 mm thick PVC taping, fitting of shutters shall be fixed as approved by GE suitable for cup board etc. including taking down with existing one. Complete all as specified and directed. Make: Action tesa, Century, Crossbond |
| 76 | S & F Shelves made of HDHMR (high density high moisture resistance) board manufactured with hard wood, prelaminated both sides white in colour 18 mm thick water resistant, termite resistant, duly edge banded with PVC taping 0.8 mm thick, cut to shape & size of shelves including taking down with existing one. Complete all as specified and directed. Make: Action tesa, Century, Kitply |
| 77 | S&F in repair Kitchen basket stainless steel for Cup and saucer basket size 430 x508x100 mm made oue of not less than 3 mm dia stainless steel rod of grade 304 along with 01 set of telescopic channel (heavy duty )of size 300mm/450mm long , roller of size 45 mm x25mm x20 mm and magnetic and connected plates to shutters. Complete all as specified and directed. |
| 78 | S&F in repair Kitchen basket stainless steel for Partition basket size 430 x508x100 mm made oue of not less than 3 mm dia stainless steel rod of grade 304 along with 01 set of telescopic channel (heavy duty )of size 300mm/450mm long , roller of size 45 mm x25mm x20 mm and magnetic and connected plates to shutters. Complete all as specified and directed. |
| 79 | S&F in repair Kitchen basket stainless steel for Plain basket size 430 x508x100 mm made out of not less than 3 mm dia stainless steel rod of grade 304 along with 01 set of telescopic channel (heavy duty ) of size 300mm/450mm long , roller of size 45 mm x25mm x20 mm and magnetic and connected plates to shutters. Complete all as specified and directed. |
| 80 | S&F in repair Kitchen basket stainless steel for Dish(plate) basket size 430 x508x250 mm made oue of not less than 3 mm dia stainless steel rod of grade 304 along with 01 set of telescopic channel (heavy duty )of size 300mm/450mm long , roller of size 45 mm x25mm x20 mm and magnetic and connected plates to shutters. Complete all as specified and directed. |
| 81 | S&F 125 mm size brass Handle fabricated type polished complete all as specified and directed. |
| 82 | S&F in repair Ball catcher with 8 mm dia steel ball and brass body and striking plate including letting in and fixed complete all as specified and directed. |
| 83 | S & F in repair for plate rack made out of 1 mm thick stainless steel of size 75 Cm X 75 Cm X 25 Cm with all internal fittings and compartments/ partitions all as per sample B-346 of Prayag. complete all as specified and directed. |
| 84 | S&F In repair mild steel powder coated 3 ball telescope slippery track 16'' long fixed to SS basket with clamp complete all as specified and directed. |
| 85 | S & F Stainless Steel Auto Concealed Zero Crank Cabinet Hinges. complete all as specified and directed. |
| 86 | S&F 15 mm dia Stainless steel Handle (modular selected quality of design as approved) fancy type,suitale for Cup Boards fixed with Self Tapping screws complete all as specified and directed. |
| 87 | M&L Granite (of any type), 18- 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platform,WHB plateform and like in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixer of pigment to match with marble shade including making full curving the edges and demolition existing stone slab. Complete all as specified and directed. |
| 88 | Demolition of brickwork or stone/boulder masonry, built in cement mortar with all quoins, arches, pillars, etc but excluding ashlar facings, dressed stone work and precast concrete articles including removal of rubbish/ demolished materials out of MD land complete all as specified and directed. |
| 89 | M&L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) Complete all as specified and directed. |
| 90 | Taking down cement plaster of any description and thickness on brick walls including racking out joints, hacking for key, scrubbing down with water etc including removal of rubbish/ demolished materials out of MD land complete all as specified and directed. |
| 91 | M&L Rendering 15mm thick CM (1:4) on brick or concrete surfaces finishing the surfaces even and smooth without using extra cement and applying with two coats of whitewash over a coat of primer on new surface complete all as specified and directed. |
| 92 | M&L Rendering 10mm thick CM (1:6) on brick or concrete surfaces finishing the surfaces even and fair including applying two coats of Acrylic distemper of any tint over a coat of alkali resistant primer. complete all as specified and directed. |
| 93 | M&L Making hole and fixing the metalic packer for hydrophobic PU foam and sealer without disturbing existing structure as per manufacturer's instructions and forming agent like coreseal 357A/ core seal 357 CAT for carrying out non destructive water proofing treatment of sunken portion slab, floors and walls of bathroom, WC WHB and floor traps (combined unit) by using construction chemical methods such as hydrophobic PU grouting, epoxy coatings etc. including cleaning of surfaces with wire brush, detecting the sources of leakage and repairing, removing/ taking down unsound treatment/ surfaces and followed by material and labour for second course injection of resin like coreseal 135A/ 135B without disturbing existing structure complete all as per manufacturer's instructions and as directed by Engr-in-Charge. Make:Buildcore chemicals/ Pidilite/ Chemistic/ Fosrock as approved. |
| 94 | M&L Cleaning carefully the existing ceramic tiles with tile cleaner with jet, washing with jet water, scratching and cleaning the joint and filling the same with epoxy tile grout of white/ matching colour, curing. Complete all as specified and directed. Make: STP, Asian paint, Berger paint, Pidilite, Fosrock Please Enable Macros to View BoQ information |
