|
| 1 | 1300013028 | Shaft (with key) of Roller Screen, Matl-EN8 Forged Ref. TKII Drwg No-R.E08.100.20.50.0(1) |
| 2 | 1300013031 | LH Long Shaft(Consisting of input shaft, intermediate shaft and output shaft) along with key Material-EN 19, Ref. TKII Drwg No-R.E08.200.20.50.0(1) |
| 3 | 1300013037 | Bevel pinion-26 Teeth (Spare of Roller Screen)(Material- EN-353) Ref. TKII Drwg No-R.E08.200.20.50.0(1) |
| 4 | 1300013033 | Bevel pinion-20 Teeth (Spare of Roller Screen)(Material- EN-353) Ref. TKII Drwg No-R.E08.200.20.50.0(1) |
| 5 | 1300013040 | Bevel Gear with Coupling-26 Teeth (Spare ofRoller Screen)(Material- EN-353) Ref. TKIIDrwg No-R.E08.200.20.50.0(1) |
| 6 | 1300013525 | Key-100 LG. x 20 W x 18 THK., Material-EN 8 for Longitudinal shaft of Roller Screen |
| 7 | 1300013526 | Key-100 LG. x 16 W x 16 THK., Material-EN 8 for Longitudinal shaft of Roller Screen |
| 8 | 1300013100 | Bearing Housing Intermediate Bearing for Brg 22217 of Roller Screen TKII Drawing No. R.E08.200.20.50.0(1) |
| 9 | 1300013095 | Labyrinth ring for Roll assembly of Roller Screen (2000W x 3000L) |
| 10 | 1300013518 | Seal Ring-Non Drive End for Roll Shaft of Roller Screen, 2000W x 3000L |
| 11 | 1300013107 | Seal Ring-Drive End for Roll Shaft of Roller Screen, 2000W x 3000L |
| 12 | 1300087356 | Bush (Spare of Roller Screen), OD-110 mm, ID-80 mm, Length- 102 mm, Material- EN8 Forged, Ref.TKII Drwg No-R.E08.100.20.50.0(1), Item No-17 |
| 13 | 1300087357 | Bush (Spare of Roller Screen), OD-110 mm, ID-80 mm, Length- 65 mm, Material- EN8 Forged, Ref.TKII Drwg No-R.E08.100.20.50.0(1) Item No-11 |
| 14 | 1300013101 | Coupling Half for Longitudinal shaft of Roller Screen TKII Drawing No. R.E08.200.20.50.0(1) |
| 15 | 1300013042 | Bushing Non-Drive side without bearing (Spare of Roller Screen) Ref. TKII Drwg No-R.E08.100.20.50.0(1) |
| 16 | 1300013026 | Bushing Drive side without bearing Ref.TKII Drwg No-R.E08.100.20.50.0(1) |
