|
| 1 | Earth work in all kinds of soil within 50m. initial lead and 1.5m.initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m. in depth and as per the direction of the Department. |
| 2 | Supplying all materials, labour, T&P and providing for Filling F & P with sand, well watered and rammed including cost, conveyance, royalty or materials. |
| 3 | Supplying all materials, labour, T&P and providing for C.C. (1:3:6) using 40mm. size hard granite metal including laying compacting, curing with all cost, conveyance, royalty of materials etc. |
| 4 | Supplying all materials, labour, T&P and providing C.C. (1:11/2:3) using 12mm. size down graded H.G.C.B. chips for RCC work including laying. compacting, curing with all cost, conveyance, royalty of materials etc. |
| 5 | Supplying all materials, labour, T&P and providing M.S. Reinforcement for R.C.C. works including cutting, bending, binding and tying grills and placing in position including cost of M.S. Rods, binding wire 18 to 20 gauge. |
| 6 | Supplying all materials, labour, T&P and providing Rigid and smooth centering and shuttering for R.C.C. works including false works and dismantling them after casting including cost of materials complete in ground (RCC foundation, Plinth band, footings, column base, Mass Sump 1 & 2 , Sump No. 3 & 4 Raft |
| 7 | RCC beeams, columns, griders & bressmere etc. for Sump 1 & 2 , Sump No. 3 & 4 |
| 8 | Roof slab for Sump 1 & 2 , Sump No. 3 & 4 |
| 9 | Supplying of all materials, 2. thick grading concrete (2:2) on roof slab with 6mm. Size on new work crusher broken Granite chips with all cost, conveyance & taxes etc. all complete as per P.W.D. specification & direction of Engineer-in-charge |
| 10 | Supplying all material, labour T&P and 12 mm. thick cement plaster in cement mortar (1.4) over RCC work including lead & royalty of materials etc for Sump 1 & 2 , Sump No. 3 & 4 |
| 11 | Supplying all material, labour T&P and 12 mm. thick cement plaster in cement mortar (1:4) over RCC work. including Punning, lead & royalty of materials etc for Sump 1 & 2 , Sump No. 3 & 4 |
| 12 | Supplying all labour and T&P for laying in trenches High Density Polyethylene Pipes conforming to IS 4984 - 1995 and Specials of following outside diameter and Class-1 to Class-3 and jointing by Fusion welding method including testing as per specification complete. (Pipe will be supplied by Deptt, Earth work in trenches to be measured and paid for separately) i 110mm dia HDPE pipe (Labour only) |
| 13 | Supplying all labour, materials and T&P and laying of M.S. Pipes of all classes of the following outside diameter including one coat priming and two coat painting as per specification complete including cost, carriage & conveyance of all materials by Head load including loading & unloading and laying etc. all complete as per the direction of Engineer - in charge. i 114.30mm OD M.S. pipe (including cost of pipe) |
| 14 | Supplying all labour, materials and T&P for flame cutting through gas cutter and facing of MS plate up to 8 mm thick at worksite including cost, carriage & conveyance of all materials to the work site etc. all complete as per the direction of Engineer - in - charge. |
| 15 | Supplying all labour, materials and T&P and laying of M.S. Pipes of all classes of the following outside diameter including one coat priming and two coat painting as per specification complete including cost, carriage & conveyance of all materials by Head load including loading & unloading and laying etc. all complete as per the direction of Engineer - in - charge. i Fillet welding |
| 16 | Supplying all labour, T&P, materials for fitting and fixing of flanged joints to flanged cast iron pipes and fittings of the following nominal diameter including testing of joints, cost of bolts and nuts and rubber insertion as per specification all completei 100mm. M.S flange Including Flange |
| 17 | Supplying all labour, T&P, materials for providing, fixing of CI Mechanical Joint collar confirming to IS: 13382/ 92 to flanged ends of Cast Iron pipes or Ductile iron pipes of the following nominal diameter including testing of joints and cost, all taxes, carriage & conveyance of all materials to the work as per specification etc. all complete as per the direction of Engineer - in - chargei 100mm dia Mechanical Joint collar |
| 18 | Supplying all labour materials and T&P fitting and fixing of cast iron sluice Valve control valve / Flow meter with double flanged ends for water work purposes as per specification for the following rating and nominal diameter including testing and supply all nut bolts, rubber insertion etc all complete as per direction of Engineer-in-Charge. (Excluding cost of valves)i 100mm dia sluice valve (excluding cost of Sluice valve) |
| 19 | Supplying all labour, materials and T&P for providing & fixing to wall, ceiling and floors of following nominal bore with clamps including making good to the wall ceiling floor etc. including cost, all taxes, carriage & conveyance of all materials to the work site etc. all complete as per the direction of Engineer - in - charge.20mm dia U.P.V.C. pipe (SCH-80) |
| 20 | 25mm dia U.P. V.C. pipe (SCH-80) |
| 21 | 32mm dia U.P.V.C. pipe (SCH-80) |
| 22 | Supplying all labour, materials and T&P for de watering with using of 5HP diesel pump including cost of POL, driver during the repair work for removing of water as required including carriage & conveyance of all materials to the work site etc. all complete as per the direction of Engineer - in - charge. |
| 23 | Supplying all labour, materials and T&P for engagement of hydraulic Excavator of 2cum bucket including hire charges, conveyance, carriage overhead charges and contractor profit etc all complete as per the direction of Engineer in charge. |
| 24 | Supplying all labour & T&P fo filling in foundation and plinth with excavated materials etc all complete as per the direction of Engineer - in - charge. |
| 25 | Supplying, of Commissioning of Openwell Submersible Pump, KOSI -135, 1 HP, Single Phase, 210 Volts, Size 25mm X 25mm with Control Panel Manufactured by Kirloskar Brothers Limited as per the requirement standards & Instruction of EIC including cost carriage and conveyance of Materials to the work site etc all complete as per the direction of Engineer in i. 1.0 HP open well submerssible pump Set |
| 26 | 2.0 HP open well submerssible pump Set |
| 27 | Supplying all materials labour T&P for fitting and fixing of 2.50 Sqmm Submerssible flat copper cable including testing and commissioning etc all complete Please Enable Macros to View BoQ information |
