Health and Family Welfare Boards / Undertakings / PSU Closing in 0 days TDR #56044654

Tender For Construction Of Maa Badi Center With 2 Class Rooms & 1 Toilet Block At Thummath, G.P. Thummath, P.S. Kushalgarh, District Banswara

Issued by Boards / Undertakings / PSU · Udaipur, Rajasthan
Tender Value
15.39 Lakhs
Estimated cost
Bid Submission
29 Jun 2026
0 days left
EMD
30780
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Udaipur → Rajasthan
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Construction Of Maa Badi Center With 2 Class Rooms & 1 Toilet Block At Thummath, G.P. Thummath, P.S. Kushalgarh, District Banswara

BOQ

Name of Work:- CONSTRUCTION OF MAA BADI CENTER WITH 2 CLASS ROOMS & 1 TOILET BLOCK AT THUMMATH, G.P. THUMMATH, P.S. KUSHALGARH, DISTRICT BANSWARA
Sl. No. Item Description
1Earth work in excavation by mechanical means (Hydraulic Excavator) / manual means in foundation trenches or drains including dressing of sides and ramming of bottoms, lift upto 1.5 Mtr. Including taking out the excavated soil and depositing and refilling of Jhiri with watering and ramming and disposal of surplu excaveted soil as directed with in a lead of 50 meters. All kinds of soils. (BSR_B1/44 I. No. 1.8)
2Providing and Laying in position Cement concrete including curring compaction etc.in specified grade excluding the cost of centering and shuttering - All work up to plinth Level 1:4:8 (1 cement : 4 course sand : 8 graded stone aggregate 40mm nominal size ) (BSR_B3/54 I. No. 3.1.6)
3Random.Rubble.Stone masonry for with hard stone in foundation and plinth in cement sand mortarr above 30cm wall in cement mortar 1:6 (1 cement:6 sand) (BSR_B6/69 I. No. 6.1.6)
4Filling available excavated earth(excludingrock) in trenches,plinth side of foundation etc. in layers not esceeding 20cm. in depth consolidating each deposited layer by ramming and watering including leadu pto 50 meter and with all lift. (BSR_B1/48 I. No. 1.25)
5Brick masonary with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in cement mortar 1:6 (1 cement : 6 coarse sand) (BSR_B5/65 I. No. 5.2.2)
6Centring and shuttering with plywood or steel sheets in cluding structing propping bacing bothways with wooden nembers and removel of formwork for superstructure up to 4.5m height above plinth level for suspended floors,roofs (BSR_B54/61 I. No. 4.10.2)
7Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc. M20 grade Nominal Mix (BSR_B4/59 I. No. 4.3)
8Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. Thermo-mechanically Treated bars (Conforming of relevent IS code) (BSR_B4/62 I. No. 4.13.3)
9Grading roof for water proofing treatment with water proffing compound. Cement mortar 1:4 (1cement : 4 coarse sand) (BSR_B10/107 I. No. 10.17.3)
10Providing and laying in position cement concrete including curing compaction etc complete in specified grade excluding cost of centering and shuttering all work up to plinth level 1:5:10 (1 cement: 5 coarse: 10 graded stone aggregate 40mm nominal) (BSR_B3/54 I. No. 3.1.7)
11Random rubble dry stone Kharanja under floor. (BSR_B11/133 I. No. 11.26)
12Providing and fixing M.S. sheet 1mm thick single leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of Engg. incharge but excluding cost of chowkhats: including two coats of anit-corrosive red oxide primer paint. Add extra for double leaf shutters. (BSR_B9/100&101 I. No. 9.17 & 9.17.1)
13Providing and fixing Square bars or other flat welded to window, ventilatiors etc. (BSR_B9/102 I. No. 9.27)
14Kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) For area of each slab from 901 to 2000 Sq.Cm. (BSR_B11/132 I. No. 11.18.1)
15Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work. (BSR_B12/146 I. No. 12.46.1)
16Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish : 20mm thick. (BSR_B12/139 I. No. 12.2.2)
17Making grooves as per design in plaster 10 mm to 20 mm wide. (BSR_B12/141 I. No. 12.19)
18Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding: New work (two or more coats) over and including scrapping and priming coat with cement primer. (BSR_B12/144 I. No. 12.37.1)
19P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2 .) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. 110 mm dia (BSR_S3/247 I. No. 3.16.3)
20P & F PVC Storage Tank ISI Marked (IS : 12701) indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 500 litres capacity. (BSR_S2/236 I. No. 2.26.3)
21Providing & fixing S.W. square mouth Gully trap `A` grade (IS 651-1992 marked) of approved make & design in existing man-hole. Size 150 X 100mm. (BSR_S3/244 I. No. 3.4.2)
22P & F G.I. pipes (Internal Work) with G.I. Fittings excluding union (IS:1239 Mark) & MS clamps including cutting and making good the walls and floors: 15mm dia nominal bore 'A' class pipe. (BSR_S2/229 I. No. 2.1.1)
23P & F Indian type white glazed vitreous china 1st quality W.C. orissa pan (IS :2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor: Size 530x410mm. (BSR_S1/217 I. No. 1.2.1)
24Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to code IS : 15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). (BSR_S1/226 I. No. 1.61)
25Construction of Tube-well upto 100 Meter depth and above in all type of rocks by DTH system and over burden, to accommodate casing pipe of following sizes in all types of soils and over burden including lowering of casing pipes, but excluding cost of casing pipes as per IS : 2800 (Part I & II) 1979 specifications. The work would be completed after obtaining sand free water. The tube well should have a throughout bore as per nominal dia of casing pipe: 125mm-do-.
26Supply of ERW M.S. black casing pipe ISI marked (IS:4270/1992) of grade Fe410 of following sizes at site of work. 125 mm Nominal bore of pipe
27S & F tube well cover of M.S.sheet (6mm thick) with nuts and bolts complete for casing size: 125mm dia
28S & F M.S. clamp, set of 50 ×6mm flat iron with nuts and bolts etc. for holding the riser pipe assembly of submersible pump set.
29Installation of India mark II hand pump set, complete on existing plate form.
30Construction of 185 cm. dia platform as per approved design and drawing of UNICEF.
31Supplying of India mark II hand pump set complete marked with cylinder and ten connecting rods etc. IS 1239
32Supplying and installation of 32 mm dia G.I. pipe medium class IS 1239 marked in 3m length including all accessories and fittings required for installation of hand pump.
33Designing, Providing, Installation, Testing, Commissioning and Comprehensive Maintainance for 5 Years of Grid connected Solar System with Galvanized MS Fabricated Structure. Lighting fitting with complete accessories for 3 Fans, 4 Tube Light, 3no. 9W LED Bulb with Electricity connection with AVVNL of MAA Badi . Supply and Installation of 1HP Submersible Pump with Complete Accessories
34Wiring of 3/5 pin 6 amp. Light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) in recessed ISI marked MMS ( IS:9537 P - III ) PVC conduit & it's ISI marked (IS:3419-1988)accessories, Hot Dipped Galvanized Modular box of 1.2 mm thick with earth terminal, 10 A modular switch, 3/5 pin 6 A modular socket, Modular face plate with grid plate, screws, making connections, testing etc. as required. For specification of copper Conductor, Phenolic Laminated sheet's & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure 'A' attached with this BSR On board
35Short point (up to 3 mtr.)
36Medium point (up to 6 mtr.)
37Long point (up to 10 mtr..)
38P/Laying ISI marked P.V.C. insulated submersible cable confirming to(IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from 99.90 % purity copper, stranding in acc. to IS:8130/IEC 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5, existing pipe / open trench / Cable tray / on surface including making connection etc. as required. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR 1.5 Sq.mm 3 core flat / Round
392.5 Sq.mm 3 core flat / Round
404.0 Sq.mm 3 core flat / Round
41Providing & Fixing of BEE Star rated copper wounded double ball bearing capacitor start, aluminium body & Metallic blade ceiling fan Conforming to all the performance requirements laid down in IS 374:2019 including all amendments, as applicable ; & Carry BIS licensing (i.e. ISI marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR 1200 mm Sweep BEE 1 Star rated (service value >=4.0 to < 4.5 )
42P & F 1.2mm thick M.S. Recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR
43Providing and Fixing socket size flush type 120/80 wall rotary 5 star fan regulator i/c making connection testing etc. as required.
44P & F IS:371 marked 6 amp surface type ceilling rose including making connection testing etc. as required. (P.N. 33, E071400)
45P & F ISI marked 6 amp bakelite batten/ angle holder including making connection testing etc. as required. (P.N. 33, E071500)
46P&F 18 SWG sheet steel boxes duly finished with two coats of red oxide and with earthing terminal of following sixes (nominal size) on surface of in recessed as required. 100mmX100mmX60mm
47150mmX75mmX60mm
48200mmX250mmX75mm
49300mmX375mmX75mm
50P&F Of IP 20 LED tube light 20 Watt with external battern made from CRCA sheet steel suitable of replace T-8/T-12 tube light , integral driver, 2000 lumen+5% tolerance system luman efficiency of 100 lm/watt minimum expected life time of 25000 burning hours, CCt 5700 K,ANSI, CRI 80, driver efficiency>85%, life expectancy of driver min 30000 hours, PF 0.95 at full load/230 volt AC.(E301400) LED Bulk head luminaire 9/10W Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 56044654
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE 15.39 Lakhs
LAST DATE 29-06-2026
Authority
Authority Name Office Of The Director Swach Project
Work Description Tender for Construction Of Maa Badi Center With 2 Class Rooms & 1 Toilet Block At Thummath, G.P. Thummath, P.S. Kushalgarh, District Banswara
Basic Detail
Tender No 15/2026-27
Bidding Type Tender
Location
City Udaipur
State Rajasthan
Key Dates
Publish Date 18 Jun 2026
Submission Date 29 Jun 2026
Open Date 29 Jun 2026
Finance
Tender Value 15.39 Lakhs
Tender Fee 500
EMD 30780
Exemption Available
Document List
a16ef677-243e-4e8e-84f8-90fa5a2a3512.html
BOQ_1012748.xls
TDMaaBadiThummathBanswada02.pdf
Tendernotice_1 (21).pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jun 18, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Jun 29, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Jun 29, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

a16ef677-243e-4e8e-84f8-90fa5a2a3512.html

xls

BOQ_1012748.xls

pdf

TDMaaBadiThummathBanswada02.pdf

pdf

Tendernotice_1 (21).pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender