Tender For Repairation And Re-Upholstering/Canning Of Certain Furniture Under Ge (West) Delhi Cantt-10, Delhi-Delhi

TDR : 56044527

Tender Notice
BOQ

19 Days Left

Delhi , Delhi

Tender Brief : Tender For Repairation And Re-Upholstering/Canning Of Certain Furniture Under Ge (West) Delhi Cantt-10

Document Fees
₹ 500 /-

EMD
₹ 92000.0 /-

Tender Value
₹ 46 Lakhs /-

Submission Date
09-07-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	CHAIR VERANDAH:- FD-19, FD-359, FD/MAP-II/06 S & F following components of Chair Verandah including dismantling taking out carefully & replace old components of Chair Verandah. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. Qty- 1600
2	Removing the existing U/S cane/niwar plastic from the seat and back of chair and recanning the seat and back of chair with plastic cane 3.5mm to 4mm wide of 1st quality, white colour in pure godrej pattern. The canning of chairs shall only be carried out after complete painting process as specified in drg.
3	Removing the existing U/S/broken PVC seat and back from the chair verandah MAP, S & F new PVC seat and back 4mm thick to the chair verandah MAP after providing flat iron 20mmx4mm support in centre of seat only by proper welding for support of PVC seat.The PVC seat shall got approved from GE before supply.
4	Replacement of legs of chair varandah with S&F new legs made out of 16 Gauge MS sheet complete all as shown on drg, specified and directed.
5	Welding work wherever required as directed by EIC legs complete all as shown on drg, specified and directed.
6	Removing the old broken shoes of chairs and S & F best quality new PVC shoes to the legs of chair.legs complete all as shown on drg, specified and directed.
7	M&L for one coat to old and two coats to new surfaces of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting (internally & externally complete) including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling with putty. After thoroughly preparing the surfaces of the Chair Varandah paint them through a spray machine to obtain a high gloss finish similar to new furniture .
8	STEEL ALMIRAH MED : FD-1032, FD-243, FD-104(M) : S & F following components of almirah including dismantling taking out carefully & replace old components of almirah. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. Qty - 600
9	Dismantling, taking out carefully old existing broken U/S Locks with key cover of any description & replacement of the same with S&F new Locks six levers, with double key including new key cover complete on external face of Almirah Steel Med & suitable 4mm dia screws complete machine all as shown on drg specified and directed.
10	Replacement of Handle with S&F new handle shall be of non-ferrous alloy with CP Godrej patten as per sample and complete with nuts and pins all as shown on drg and specified and directed by E-in-C and GE.
11	Replacement of three way locking device with S&F new three way locking device complete with fixing accessories for steel almirah medium. legs complete all as shown on drg, specified and directed.
12	Replacement of legs of steel almirah medium with S&F new legs complete all as shown on drg, specified and directed.
13	Replacement of shelf of steel almirah medium with S&F new shelf complete all as shown on drg, specified and directed .
14	Door Shutter (New shutters must be made of 1mm thick MS sheet, made to shape and size) legs complete all as shown on drg, specified and directed.
15	Cleats (New cleats must be made of 2mm thick MS sheet) legs complete all as shown on drg, specified and directed.
16	Welding work wherever required as directed by EIC legs complete all as shown on drg, specified and directed.
17	M&L for one coat to old and two coats to new surfaces of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting (internally & externally complete) including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling with putty. After thoroughly preparing the surfaces of the Steel Almirah Med, paint them through a spray machine to obtain a high gloss finish similar to new furniture.
18	STEEL LOCKER OF SORTS : FD-127(M), FD-257, FD-1029, CEDZ-D-ARC-27 S & F following components of locker Steel including dismantling taking out carefully & replace old components of locker steel. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. Qty-700
19	Replacement of Handle with S&F new handle shall be of non-ferrous alloy with CP Godraj patten as per sample and complete with nuts and pins all as shown on drg and specified and directed by E-in-C and GE.
20	Replacement of legs with S&F new legs complete all as shown on drg, specified and directed.
21	Replacement of shelf with S & F New shelf complete all as shown on drg, specified and directed .
22	Replacement with S&F new SS conduit pipe 20 mm dia for locker steel or sorts complete all as shown on drg, specified and directed .
23	Chromium plated safety type hasp & staples complete all as shown on drg, specified and directed.
24	Door Shutter (New shutters must be made of 1mm thick MS sheet, made to shape and size) complete all as shown on drg, specified and directed.
25	Replacement of hinges of steel locker with S&F new hinges SS complete all as shown on drg, specified and directed.
26	Welding work wherever required as directed by EIC complete all as shown on drg, specified and directed.
27	M&L for one coat to old and two coats to new surfaces of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting (internally & externally complete) including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling with putty. After thoroughly preparing the surfaces of the locker steel, paint them through a spray machine to obtain a high gloss finish similar to new furniture. complete all as shown on drg, specified and directed.
28	TABLE BEDSIDE STEEL : FD/E6/MAP/15(R) S & F following components of table bed side including dismantling taking out carefully & replace old components of table bed side. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. Qty - 800
29	Replacement of old existing broken top of table bed side of any description with S&F new table top of 18mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked with 4mm thick PVC edging fixed to two sides with chemical adhesive by hot pressure method. Rest as specified in drg and directed by Engineer-in-Charge/ GE.
30	All as per item 4.01 here in but for sides of table bedside. complete all as shown on drg, specified and directed.
31	S & F new legs to table bed side steel made of 18mm MS square pipe placed in position as shown in drg. complete all as shown on drg, specified and directed.
32	S & F new CP steel 100mm long handle to the drawers of the table bed side steel placed in position as shown in drg. complete all as shown on drg, specified and directed.
33	S & F new 6mm commercial ply at back of the table bed side steel fitted with screws as shown on drg. complete all as shown on drg, specified and directed.
34	Replacement of Upper drawer made out of 18 mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked with 4mm thick PVC edging fixed to two sides with chemical adhesive by hot pressure method. Rest as specified in drg and directed by Engineer-in-Charge/ GE.
35	Replacement of Lower drawer made of 18 mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked with 4mm thick PVC edging fixed to two sides with chemical adhesive by hot pressure method. Rest as specified in drg and directed by Engineer-in-Charge/ GE.
36	S & F new telescopic channel. (MS) complete all as shown on drg, specified and directed.
37	S & F new rubber shoes 18mm square of high quality placed in position as shown in drg. complete all as shown on drg, specified and directed.
38	Welding work wherever required as directed by EIC and GE. complete all as shown on drg, specified and directed.
39	M&L for one coat to old and two coats to new surfaces of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting (internally & externally complete) including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling with putty. After thoroughly preparing the surfaces of the table bed side, paint them through a spray machine to obtain a high gloss finish similar to new furniture. complete all as shown on drg, specified and directed.
40	CHAIR DINING : FD-16(M) / 203 / 228 / 279: Dismantle, take out carefully & replace old components of chair. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. Qty - 2050
41	Dismantling, taking out carefully of old existing broken back leg of the chair of any description & replacement of the same with S&F new back leg of Ist class HW (TW), made to shape, fixed in position. complete all as shown on drg, specified and directed.
42	All as per item 5.01 here in before but replacement of front leg with S&F new front leg made out of Ist class HW (TW). complete all as shown on drg, specified and directed.
43	All as per item 5.01 here in before but replacement of side rail with S&F new side rail made out of Ist class HW (TW) with holes for weaving. The spacing of holes shall match with the existing rail on other side. complete all as shown on drg, specified and directed.
44	All as per item 5.01 here in before but replacement of front or back rail with S&F new front or back rail made out of Ist class HW (TW) with holes for weaving. The spacing of holes shall match with the existing rail on other side. complete all as shown on drg, specified and directed.
45	All as per item 5.01 here in before but replacement of stiffener with S&F new stiffener made out of Ist class HW (TW) complete all as shown on drgs. complete all as shown on drg, specified and directed.
46	All as per item 5.01 here in before but replacement of back strip with S&F new back strip made out of Ist class HW (TW) complete all as shown on drgs.
47	Provn. of new angular bracket with 08 Nos steel screws suitable size of Ist class HW (TW) of size 75mm x 75mm x 25mm complete as approved and all as shown on drgs.
48	Recanning of chair Dining with 2mm wide new plastic cane in Godrej pattern. complete all as shown on drg, specified and directed.
49	S & F new Nylon Buffer of superior quality with suitable screws for fixing complete all as shown on drg, specified and directed.
50	Polishing one coat to old and two coats to new surfaces to Chair Dining with lacquer polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface. Filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment. Note: The surfaces of furniture to be polished shall be cleaned by grinding machine in order to get high glossy finish alike new furniture. Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Delhi Tenders

Services Tenders

Space Planning and Designing Tenders

Furnishing Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Repairation And Re-Upholstering/Canning Of Certain Furniture Under Ge (West) Delhi Cantt-10, Delhi-Delhi

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Sl. No.	Item Description
1	CHAIR VERANDAH:- FD-19, FD-359, FD/MAP-II/06 S & F following components of Chair Verandah including dismantling taking out carefully & replace old components of Chair Verandah. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. Qty- 1600
2	Removing the existing U/S cane/niwar plastic from the seat and back of chair and recanning the seat and back of chair with plastic cane 3.5mm to 4mm wide of 1st quality, white colour in pure godrej pattern. The canning of chairs shall only be carried out after complete painting process as specified in drg.
3	Removing the existing U/S/broken PVC seat and back from the chair verandah MAP, S & F new PVC seat and back 4mm thick to the chair verandah MAP after providing flat iron 20mmx4mm support in centre of seat only by proper welding for support of PVC seat.The PVC seat shall got approved from GE before supply.
4	Replacement of legs of chair varandah with S&F new legs made out of 16 Gauge MS sheet complete all as shown on drg, specified and directed.
5	Welding work wherever required as directed by EIC legs complete all as shown on drg, specified and directed.
6	Removing the old broken shoes of chairs and S & F best quality new PVC shoes to the legs of chair.legs complete all as shown on drg, specified and directed.
7	M&L for one coat to old and two coats to new surfaces of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting (internally & externally complete) including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling with putty. After thoroughly preparing the surfaces of the Chair Varandah paint them through a spray machine to obtain a high gloss finish similar to new furniture .
8	STEEL ALMIRAH MED : FD-1032, FD-243, FD-104(M) : S & F following components of almirah including dismantling taking out carefully & replace old components of almirah. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. Qty - 600
9	Dismantling, taking out carefully old existing broken U/S Locks with key cover of any description & replacement of the same with S&F new Locks six levers, with double key including new key cover complete on external face of Almirah Steel Med & suitable 4mm dia screws complete machine all as shown on drg specified and directed.
10	Replacement of Handle with S&F new handle shall be of non-ferrous alloy with CP Godrej patten as per sample and complete with nuts and pins all as shown on drg and specified and directed by E-in-C and GE.
11	Replacement of three way locking device with S&F new three way locking device complete with fixing accessories for steel almirah medium. legs complete all as shown on drg, specified and directed.
12	Replacement of legs of steel almirah medium with S&F new legs complete all as shown on drg, specified and directed.
13	Replacement of shelf of steel almirah medium with S&F new shelf complete all as shown on drg, specified and directed .
14	Door Shutter (New shutters must be made of 1mm thick MS sheet, made to shape and size) legs complete all as shown on drg, specified and directed.
15	Cleats (New cleats must be made of 2mm thick MS sheet) legs complete all as shown on drg, specified and directed.
16	Welding work wherever required as directed by EIC legs complete all as shown on drg, specified and directed.
17	M&L for one coat to old and two coats to new surfaces of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting (internally & externally complete) including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling with putty. After thoroughly preparing the surfaces of the Steel Almirah Med, paint them through a spray machine to obtain a high gloss finish similar to new furniture.
18	STEEL LOCKER OF SORTS : FD-127(M), FD-257, FD-1029, CEDZ-D-ARC-27 S & F following components of locker Steel including dismantling taking out carefully & replace old components of locker steel. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. Qty-700
19	Replacement of Handle with S&F new handle shall be of non-ferrous alloy with CP Godraj patten as per sample and complete with nuts and pins all as shown on drg and specified and directed by E-in-C and GE.
20	Replacement of legs with S&F new legs complete all as shown on drg, specified and directed.
21	Replacement of shelf with S & F New shelf complete all as shown on drg, specified and directed .
22	Replacement with S&F new SS conduit pipe 20 mm dia for locker steel or sorts complete all as shown on drg, specified and directed .
23	Chromium plated safety type hasp & staples complete all as shown on drg, specified and directed.
24	Door Shutter (New shutters must be made of 1mm thick MS sheet, made to shape and size) complete all as shown on drg, specified and directed.
25	Replacement of hinges of steel locker with S&F new hinges SS complete all as shown on drg, specified and directed.
26	Welding work wherever required as directed by EIC complete all as shown on drg, specified and directed.
27	M&L for one coat to old and two coats to new surfaces of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting (internally & externally complete) including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling with putty. After thoroughly preparing the surfaces of the locker steel, paint them through a spray machine to obtain a high gloss finish similar to new furniture. complete all as shown on drg, specified and directed.
28	TABLE BEDSIDE STEEL : FD/E6/MAP/15(R) S & F following components of table bed side including dismantling taking out carefully & replace old components of table bed side. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. Qty - 800
29	Replacement of old existing broken top of table bed side of any description with S&F new table top of 18mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked with 4mm thick PVC edging fixed to two sides with chemical adhesive by hot pressure method. Rest as specified in drg and directed by Engineer-in-Charge/ GE.
30	All as per item 4.01 here in but for sides of table bedside. complete all as shown on drg, specified and directed.
31	S & F new legs to table bed side steel made of 18mm MS square pipe placed in position as shown in drg. complete all as shown on drg, specified and directed.
32	S & F new CP steel 100mm long handle to the drawers of the table bed side steel placed in position as shown in drg. complete all as shown on drg, specified and directed.
33	S & F new 6mm commercial ply at back of the table bed side steel fitted with screws as shown on drg. complete all as shown on drg, specified and directed.
34	Replacement of Upper drawer made out of 18 mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked with 4mm thick PVC edging fixed to two sides with chemical adhesive by hot pressure method. Rest as specified in drg and directed by Engineer-in-Charge/ GE.
35	Replacement of Lower drawer made of 18 mm thick Rosewood/Teak Gold Prelaminated MDF Board exterior grade (Grade I, Type-II) ISI marked with 4mm thick PVC edging fixed to two sides with chemical adhesive by hot pressure method. Rest as specified in drg and directed by Engineer-in-Charge/ GE.
36	S & F new telescopic channel. (MS) complete all as shown on drg, specified and directed.
37	S & F new rubber shoes 18mm square of high quality placed in position as shown in drg. complete all as shown on drg, specified and directed.
38	Welding work wherever required as directed by EIC and GE. complete all as shown on drg, specified and directed.
39	M&L for one coat to old and two coats to new surfaces of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting (internally & externally complete) including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling with putty. After thoroughly preparing the surfaces of the table bed side, paint them through a spray machine to obtain a high gloss finish similar to new furniture. complete all as shown on drg, specified and directed.
40	CHAIR DINING : FD-16(M) / 203 / 228 / 279: Dismantle, take out carefully & replace old components of chair. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. Qty - 2050
41	Dismantling, taking out carefully of old existing broken back leg of the chair of any description & replacement of the same with S&F new back leg of Ist class HW (TW), made to shape, fixed in position. complete all as shown on drg, specified and directed.
42	All as per item 5.01 here in before but replacement of front leg with S&F new front leg made out of Ist class HW (TW). complete all as shown on drg, specified and directed.
43	All as per item 5.01 here in before but replacement of side rail with S&F new side rail made out of Ist class HW (TW) with holes for weaving. The spacing of holes shall match with the existing rail on other side. complete all as shown on drg, specified and directed.
44	All as per item 5.01 here in before but replacement of front or back rail with S&F new front or back rail made out of Ist class HW (TW) with holes for weaving. The spacing of holes shall match with the existing rail on other side. complete all as shown on drg, specified and directed.
45	All as per item 5.01 here in before but replacement of stiffener with S&F new stiffener made out of Ist class HW (TW) complete all as shown on drgs. complete all as shown on drg, specified and directed.
46	All as per item 5.01 here in before but replacement of back strip with S&F new back strip made out of Ist class HW (TW) complete all as shown on drgs.
47	Provn. of new angular bracket with 08 Nos steel screws suitable size of Ist class HW (TW) of size 75mm x 75mm x 25mm complete as approved and all as shown on drgs.
48	Recanning of chair Dining with 2mm wide new plastic cane in Godrej pattern. complete all as shown on drg, specified and directed.
49	S & F new Nylon Buffer of superior quality with suitable screws for fixing complete all as shown on drg, specified and directed.
50	Polishing one coat to old and two coats to new surfaces to Chair Dining with lacquer polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface. Filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts and carrying out antitermite and antibug treatment. Note: The surfaces of furniture to be polished shall be cleaned by grinding machine in order to get high glossy finish alike new furniture. Please Enable Macros to View BoQ information

Tender For Repairation And Re-Upholstering/Canning Of Certain Furniture Under Ge (West) Delhi Cantt-10, Delhi-Delhi

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us