|
| 1 | Earth Work in Excavation by mechanical means (Hydraulic exacavator)/manual means over area (exceeding 30 cm in depth. 1.5 m in width as well as 10 sqm on pkan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m as directed by Engineer-incharge 2.6:1 |
| 2 | Excavating supplying, stacking and filling of local earth (including royality) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, slides offoundation etc. complete for all lift. DSR NO. 2.25(a) |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work up to plinth level 1:4:8 (1 Cement : 4 coarse sand (zone- III) derived from natural sources : 8 graded stone aggregate : 40 mm nominal size derived from natural sources) DSR No 4:1:8 |
| 4 | Reinforced cement concret work in beams, suspended floors, roofshaving slope up to 15 landings, balconies, shelves, chajjas, intels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level excluding the cost of centering shuttering finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural soures) 5.3 |
| 5 | Steel reinforcement for R.C.C work including straightening cutting, bending, placing in position and binding all complete upto plinth level, Thermo-Mechanically Treated bars of grade Fe-500D or more DSR No 5.22.6 |
| 6 | Excavating supplying, stacking and filling of local earth (including royality) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, slides offoundation etc. complete for all lift. DSR No. 2.25(a) |
| 7 | Brick Work with common burnt clay (non modular) bricks of class -150 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:6 (1 Cement : 6 COARSE SAND) dsr 6.4:2 Back Side Wall SW Partiton |
| 8 | 12 mm cement plaster of mix 1:6 (1 cement 6 coarse sand) DSR No 13.4.2 |
| 9 | Cement concrete flooring 1.2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12-20mm nominal size laid in one layer neat cement (25mm thick floor) 11.3:1 Back Side Wall SW Partiton |
| 10 | Provoding and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer over the plastered wall surface to prepare the surface even the smooth complete DSR No. 13.80 |
| 11 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1;67 itr/10 sqm over and including priming coat of esterior primer applied @ 0.90 litre/10 sqm) DSR No 13.46:1 |
| 12 | Proving and fixing M.S Tubular frmaes for doors, windows, ventilators and cupboard with rectangula/L-Type sections, made of 1.60 mm thick M.S Sheet, joints mitred, welded and grinded finish with profiles of required size, including fixing of necessary but hinges and screws and applying a priming coat of approved steel primer. Fixing with 15O3 mm lugs 10 cm long embedded in cement concrete block 15O10O10 cm of C.C 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) DSR 10.15.1 Column Pipe Parlin Pipe (45O45O2.5) mm |
| 13 | Providing and fixing precoated galvanished iron profile sheets (size shape and pitch of corrugation) as approved by Engineer-in Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coated thickness of 0-05mm) with zinc coating 120 grams per sqm as per IS 277, IN 240 MPA STEEL GRADE, 5-7 MICRONS EPOXY PRIMER ON BOTH SIDE OF THE SHEET AND POLYESTER TOP COAT 15-18 MICRONS sHEET SHOULD HAVE PROTECTIVE GUARD FILM OF 25 MICRONS MUNIMUM TO AVOID SCRATHES DURING TRANSPORTATION AND SHOULD BE SUPPLIED IN SINGLE LENGTH UPTO 12 METRE OR AS DESIRED BY eNGINEER-IN-CHARGE. THE sHEET SHALL BE FIXED USING self drilling/self tapping screws of size (5.5O55 mm) with EPDM seal complete upto any pitch in horizontal/vertical or curved surfaces, excluding the cost of purlins rafters and trusses and including cutting to size and shape wherever required DSR No. 12.50 |
| 14 | 13.62 Painting and synthetic enamel paint of approved brand and manufacture of required colour to give and ever shad two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture DSR 13.62.1 |
| 15 | 110 MM PVC PIPE for rain water |
| 16 | S/F of black granite stone sign board including of all work complete |
| 17 | G.S.T Please Enable Macros to View BoQ information |
