|
| 1 | Dismantling of tiles of any description or thickness in floor, hearth or wall including cement mortar bedding, removing debries off the premises complete all as specified and directed. |
| 2 | Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 3 | M&L for durastone heavy duty vitrified parking tiles of size 600 x 600 x 15 mm thick set jointed and pointed in neat cement slurry in floors incl 20 mm thick screed in CM 1:4 complete all as specified and as directed by Engineer in charge |
| 4 | M&L for ceramic coloured tiles in vertical surface (dado/skirting) to match the shade and size of floor tiles laid over and including 10mm thick back coat in CM (1:4), complete all as specified and directed. |
| 5 | M&L for glazed ceramic tiles 350 x 250x 7mm / 450x300x 7mm thick in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick backing in cement mortar (1:3) complete all as specified and directed. |
| 6 | M&L for coloured non-skid ceramic tiles 7 to 8 mm thick exc. 0.06 sqm but n.exc 0.11sqm area of each tiles in floor/ steps etc set and jointed in neat cement slurry and pointed in coloured cement to match as in floor over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 7 | M & L for 25 mm thick, PCC 1:2:4, Type B-0, using 12.5mm graded aggregate as in Sub base for flooring/levelling coarse, sunken floor etc complete all as specified and as directed. |
| 8 | Demolition of stone slabs and tiles of any description or thicness in floors laid bedded pointed in any cement mortor in any position not otherwise specifically provided for complete all as specified and directed. |
| 9 | M&L 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified and directed. |
| 10 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations all as directed by Engr in Charge. |
| 11 | Taking down cement plaster on brick or stone wall and racking out joints hacking for key sucrubing down with water etc. complete all as specified and directed. |
| 12 | M & L for rendering 15 mm thick in cement mortar 1:4 on concrete or brick masonry surfaces including mixing water proofing compound as per manufacurers instructions and finishing the top surface even and fair without using extra cement complete all as specified and as directed.Note: Water proofing compound will be measured and paid separately. |
| 13 | Supply only water proofing compound ISI marked complete all as specified and as directed by Engineer in charge |
| 14 | M & L for rendering to concrete or block masonry surfaces or surfaces other than fair faces of brick surfaces, 10mm thick in Cement Mortar 1:6, surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 15 | M&L rendering 5mm thick in CM (1:3) on ceiling surfaces finished even & smooth without using extra cement complete all as specified and as directed by Engineer-in-charge. |
| 16 | M&L proparing newly plastered surfaces of wall and applying two coats of high sheen, Anti-Fungal, Excellent Stain Resistant interior Acrylic emulsion paint over a coat of primer complete all as specified and as directed by Engineer-in-charge.Make: Asian Paints (Tractor uno), Berger (Bison Emulsion) Nerolac (beauty smooth). Shalimar Paints (No.1 Silk) |
| 17 | M&L proparing newly plastered surfaces of ceiling and applying two coats of high sheen, Anti-Fungal, Excellent Stain Resistant interior Acrylic emulsion paint over a coat of primer complete all as specified and as directed by Engineer-in-charge.Make: Asian Paints (Tractor uno), Berger (Bison Emulsion) Nerolac (beauty smooth). Shalimar Paints (No.1 Silk) |
| 18 | M & L for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal esistance, dirt resistance exterior paint of WHITE colour with silicon additives coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm over new surfaces complete all as specified and as directed by Engineer-in-charge.Make: Asian Paints (Apex Ultima), Berger (Weathercoat Long Life Flexo) Nerolac (Excel Total), Shalimar Paints (Weatherpro+ Super Luxury Emulsion) |
| 19 | M&l complete removal of existing surface finish and preparing old putty/plastored surfaces of wall and applying two coats of high sheen, Anti-Fungal, Excellent Stain Resistant interior plastic emulsion paint over a coat of primer complete all as specified and as directed by Engineer-In-charge.Make: Asian Paints (Apcolite Advanced Shyne), Berger (Easy Clean), Nerolac (Peari), Shalimar (Supera Stay Clean). |
| 20 | M&L complete removal of existing surface finish and preparing old Putty/plastered surfaces of Ceiling and applying two coats of high sheen, Anti-Fungal, Excellent Stain Resistant interior plastic emulsion paint over a coat of primer complete all as specified and as directed by Engineer-in-charge.Make: Asian Paints (Apcolite Advanced Shyne), Berger (Easy Clean), Nerolac (Peari), Shalimar (Supera Stay Clean). |
| 21 | M & L for preparation of old steel surfaces exc 10cm width and girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 22 | M & L for preparation of old wooden surfaces exc 10cm width and girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 23 | M&L for complete removal of existing treatment and Preparation of plastered wall surfaces using mechanical means and removing all fungus, black stains, algae etc and applying Two coals of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of WHITE colour with silicon additives @ 1,43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces complete all as specified and as directed by Engineer-in-charge.Make: Asian Paints (Apex Ultima), Berger (Weathercoat Long Life Flexo) Nerolac (Excel Total), Shalimar Paints (Westherpro+ Super Luxury Emulsion)Note: Rate inclusive of scaffolding at any height. |
| 24 | M&L for complete removal of existing treatment and Preparation of plastered wall surfaces using mechanical means and removing all fungus, black stains, algae etc and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/itre and UV resistance as per IS 15489:2004, Alkali & fungel resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including piming coat of exterior primer applied @ 0.90 litrel 10 sqm over old surfaces complete all as specified and as directed by Engineer-in-charge.Make: Asian Paints (Apex Ultima), Berger (Weathercoat Long Life Flexo) Nerolac (Excel Total), Shalimar Paints (Weatherpro+ Super Luxury Emulsion)Note: Rate inclusive of scaffolding at any height. |
| 25 | Taking down Chowkats or frame with shutters [without taking off shutter from the frame] not exceeding 1.5 Sq.m each and removing to store complete all as specified and as directed. |
| 26 | Taking down Chowkats or frame with shutters [without taking off shutter from the frame] exceeding 1.5 Sq.m but not exceeding 4.00 Sq.m each and removing to store complete all as specified and as directed. |
| 27 | Refixing Shutters of any description in same opening exceeding 1.00 Sq.m but not exceeding 2.00 Sq.m each complete all as specified and as directed. |
| 28 | Resecuring (or) Easing and Adjusting without taking down shutters of any description and any size complete all as specified and as directed. |
| 29 | Providing and fixing factory made uPVC white colour Sliding window Three track area not exceeding 2.00 sqm each made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.) |
| 30 | S&F silicon sealant along the joints of UPVC window complete all as specified and as directed |
| 31 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 32 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. |
| 33 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 34 | S&F for factory made single extruded 18/19 mm thick WPC (Wood Polymer Composite) solid board one side white color and other side of board laminted with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws etc., complete all as specified and as directed. |
| 35 | S&F solid PVC door frame of size 50mmx47mm made out of 5mm wood grain printed PVC sheet edges will be painted to match with printed sheet reinforced with MS square tube in opening as per specification and drawing. |
| 36 | S&F factory made solid panel PVC Door shutter 30mm thick (Style) consisting of frame made out MS frame shall be covered with heat moulded wood grain printed PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (90o C ) used instead of exposed portion of PVC sheet beading. having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheet for top rail, lock rail, & bottom rail; Panneling of colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement at site as per specification and drawing. |
| 37 | S & F 150 mm long Aluminium anodised barrel tower bolts of extruded sections complete all as specified and as directed. |
| 38 | S & F in repair 150 mm long Aluminium anodised barrel tower bolts of extruded sections complete all as specified and as directed. |
| 39 | S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extended sections or cast aluminium alloy all complete all as specified and as directed. |
| 40 | S&F in repair 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections complete all as specified and as directed. |
| 41 | S & F 150mm long Aluminium anodised Handle, of extruded section fabricated type complete all as specified and as directed. |
| 42 | S & F in repairs 150mm long Aluminium anodised Handle, of extruded section Fabricated type complete all as specified and as directed. |
| 43 | S&F Stainless steel butt hinges 100mm size medium weight complete all as specified and as directed. |
| 44 | S&F in repair Stainless steel butt hinges 100mm size medium weight complete all as specified and as directed. |
| 45 | S & F Floor Door Stopper of size 140mm overall length of cover plate of aluminium alloy body and tongue, anodised with hard drawn steel spring complete all as specified and as directed. |
| 46 | S & F in repair Floor Door Stopper of size 140mm overall length of cover plate of aluminium alloy body and tongue, anodised with hard drawn steel spring complete all as specified and as directed. |
| 47 | Supply only 4.8 mm thick, Sheet glass, selected quality, in squares n. exc 0.5 Sqm each pane complete all as specified and directed. |
| 48 | Supply only 4mm thick, Figured glass, pinhead type in squares n exc 0.5 sqm each pane complete all as specified and directed. |
| 49 | Supply only Stainless steel wire cloth 0.36 mm in nominal dia of wire average width of aperture 1.40 mm and fixed with tinned tacks of stainless steel wire staples to steel shutters or fixed with wooden beads to wooden joinery, complete all as specified and directed. |
| 50 | S&F in repair 4.8 mm thick sheet glass ordinary quality in aluminum joinery in squares of area n.exc 0.50 sqm in each pane including necessary adjustements, dismantling and re-securing complete all as specified and directed. |
| 51 | S&F in replacement of stainless steel wire cloth 0.36 mm in nominal dia of wire average width of aperture 1.40 mm and fixed with tinned tacks of stainless steel wire staples to steel shutters or fixed with wooden beads to wooden joinery, complete all as specified and directed. |
| 52 | S&F 12mm thick Prelaminated particle board, interior grade, prelaminated on both sides with decorative choice lamination fixed as in panels of Aluminium door shutters, partition etc complete all as specified and directed. |
| 53 | S & F anodized aluminum door seals of 32mm (overall size) with standard 1mm thick aluminum sections and bottom brush and provision of counter sunk holes for screws etc complete all as specified and directed. |
| 54 | S & F in repair 18 to 20mm thick prelaminated MDF panels of interior grade type-II of approved shade for kitchen cabin/wardrobe/wall panelling fixing with necessary fitting like keku fitting,spring clip,hanger plate,modular hinge/clip,push fix or stud fitting as per manufacturers instructions complete all as specified and as directed. |
| 55 | M & L 100mm Extruded brass handles, fabricated type polished complete all as specified and directed. |
| 56 | S & F 75mm Butt hinges, extruded brass, with mild steel hinge pin, bright polished and fixed complete all as specified and directed. |
| 57 | S & F Ball catches/Magnet catcher with 8mm dia steelball, and brass body and striking plate including letting in and fixed with screws complete all as specified and as directed. |
| 58 | S&F mild steel works as in small articles such as hold fast,clamps, hooks, plain angle cleats etc bent to shape making holes etc complete all as specified and directed. |
| 59 | S & F Continuous (piano) hinges width of flap 40 mm (when open) ,stainless steel, bright finish or electro galvanised complete all as specified and directed. |
| 60 | S&F in repair stainless steel curtain rod 25mm dia steel pipe cutting into length as required at site with and incl SS end caps/lobs and SS wall mounting brackets etc., complete all as specified and as directed. |
| 61 | S&F in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 62 | Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed. |
| 63 | S&F MS Roof trusses (Framed), trussed, purlins, rafters, crane gantries, rails, posts and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. including necessary welding confirming to Fe-410-W(Gde-E250 quality-A) complete all as specified and directed. |
| 64 | M& L second class hard wood Plain fillets exc 13 sqcm and nexc 25 sqcm square, rectangular or triangular in section, clean sawn, secured with nails or bradsbut bullnosed,splayed, chamfered or rounded on one edge or face complete all as specified and directed. |
| 65 | S&F in repair stainless steel sink with drainage board made out of 1.00 mm thick sheet with plug, washers, Ms angle cantilever brackets for suitable size and connecting union to pipe of overall size 1140 mm x 500 mm and bowl size 510mm x 400 mm x 190 mm complete all as specified and directed. |
| 66 | S & F in repair 32 mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc.with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 67 | S & F in repair 32 mm (Dia of discharge pipe) Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm- 45gms/40mm-60 gms) complete all as specified and directed. |
| 68 | S&F in repair PVC flexible waste pipe of 32 mm for wash hand basin and kitchen sink complete all as specified and as directed |
| 69 | S&F in repairs Towel Rail CP Brass Make Prayag Cat.No BA 10 S or equivalent all as specified. |
| 70 | S&F in repair Angular stop cock cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for pipe or union fixed for 15mm bore etc., complete all as specified and as directed.Make: Jaquar, Prayag,Parry ware (super fine), Prima, Pearl |
| 71 | Fixing only in repairs angular cock including cleaning, removing of air block/washer etc of any type and size complete all as specified and directed. |
| 72 | S&F in repairs concealed stop cock with fitting sleeves,operating lever & adjustable wall flange with seal(comatible with ALD-089)valves cast copper alloy chromium plated with long shank and cup (concealed type) fancy type screwed down high pressure screwed both ends for pipe complete all as specified and directed. Make: Jaquar, Prayag,Parry ware (super fine), Prima, Pearl |
| 73 | Fixing only in repairs stop cock including cleaning, removing of air block/washer etc of any type and size complete all as specified and directed. |
| 74 | S&F in repair CP Toilet paper holder fancy type high quality complete all as specified and directed. Make: Jaquar, Prayag,Parry ware (super fine), Prima, Pearl |
| 75 | S & F in repair quarter turn Bib Taps with flange, cast copper alloy, 15 mm dia, Chromium Plated, Fancy Type for iron pipe and fixed etc complete all as specified and as directed.Make: Jaquar, Prayag,Parry ware (super fine), Prima, Pearl |
| 76 | Fixing only in repairs bib cock including cleaning, removing of air block/washer etc of any type and size complete all as specified and directed. |
| 77 | S&F in repairs brass chromium plated Hand shower (Health Faucet)(ABS Body) with 1 Meter long Easy Flex Tube in Chrome Finish& wall Hook complete all as specified and directed. Make: Jaquar, Prayag,Parry ware (super fine), Prima, Pearl |
| 78 | S & F in repair Soap Dish,brass chromium plated of approximate size 160 x 160 x 90 mm with screws complete all as specified and as directed. Make: Jaquar, Prayag,Parry ware (super fine), Prima, Pearl |
| 79 | S & F in repair PVC Body Cabinet Box Mirror of size 350mm X 450mm X 100mm in PTMT alloy of approved design and pattern complete all as specified and directed |
| 80 | S & F in repairs quarter turn Pillar Taps, cast copper alloy, Chromium Plated, Fancy Type, 15 mm dia, with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed.Make: Jaquar, Prayag,Parry ware (super fine), Prima, Pearl |
| 81 | Fixing only in repairs pillar taps including cleaning, removing of air block/washer etc of any type and size complete all as specified and directed. |
| 82 | S & F in repairs 10 Litres capacity, PVC Valve less, Syphonic action type, low level flushing cistern, white, with inlet ball valve, float, handle, flush pipe of polyethylene of low or high density of PVC, 32mm dia including brackets and connections to pipe of Make Slimline or Cera or equivalent make complete all as specified and as directed. |
| 83 | S&F in repairs PVC flexible connection with PTMT nuts, of 15mm dia and 600mm long with brass unions and rubber washers on either side, for connecting water supply line to WHB, flushtank ,Geyser etc, complete all as specified and as directed. |
| 84 | S&F in replacement of 1st quality vitreous China white urinal flat back (Large size) with and incl CP waste coupling of suitable size, cast copper alloy CP spreader union with discharge pipe duly connected to auto closing angle cock, complete with necessary fittings, complete all as specified and as directed. |
| 85 | Dismantling water tank of capacity exc 500 ltr but not exc 1000 ltr complete all as directed. |
| 86 | S&F of rotational moulded polyethylene cylindrical vertical with closed top threaded cover water storage tank triple layered WHITE COLOUR 1000 Ltr capacity, UV protected, Anti-bactrial coating with connecting nipple, hoisted and fixed in position on new or existing foundation, complete all as specified and directed. Make : Vectus(Smart) / Prince(Store Fit) / Oxygen(Shine) |
| 87 | S&F of rotational moulded polyethylene cylindrical vertical with closed top threaded cover water storage tank triple layered WHITE COLOUR 500 Ltr capacity, UV protected, Anti-bactrial coating with connecting nipple, hoisted and fixed in position on new or existing foundation, complete all as specified and directed. Make : Vectus(Smart) / Prince(Store Fit) / Oxygen(Shine) |
| 88 | Disconnecting existing tanks of capacity exc 500 ltr but not exc 1000 ltr , setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed. Note :- Cleaning repairing, etc. measured separately |
| 89 | Taking up or down 20 mm bore tubing and connections and removing off the site complete all as specified and as directed. |
| 90 | Taking up or down 25 mm bore tubing and connections and removing off the site complete all as specified and as directed. |
| 91 | Supply and laying of CPVC pipes 20 mm dia outer boreSDR 11 &plain CPVC SDR 11with all special fittings on walls /ceilings or laying in floors complete all as specified and as directed. |
| 92 | Supply and laying of CPVC pipes 25mm dia outer boreSDR 11 &plain CPVC SDR 11 with all special fittings on walls /ceilings or laying in floors complete all as specified and as directed. |
| 93 | Supply and fixing 20 mm outer dia CPVC Male Brass Threaded Adaptor (MTA/MBTA) complete all as directed. |
| 94 | Supply and fixing 25 mm outer dia CPVC Male Brass Threaded Adaptor (MTA/MBTA) complete all as directed. |
| 95 | Supply and fixing 20mm outer dia CPVC pipes brass Elbow (3/4 X1/2) complete all as directed. |
| 96 | Supply and fixing 20mm outer dia CPVC female brass adaptor (FTA/FBTA) complete all as directed. |
| 97 | Supply and fixing 25 mm outer dia CPVC female brass adaptor (FTA/FBTA) complete all as directed. |
| 98 | Supply and fixing 20 mm outer dia CPVC Brass Tee complete all as directed. |
| 99 | Fixing only in repairs by replacing minor parts like flushing knob, float, screws etc of PVC flush tank low level cistern, 10 ltr capacity, including connecting to existing water supplyline and water closet pan complete all as directed. |
| 100 | S&F in repair Ball brass valve high pressure of polyethylene float and fly nut complete screwed for iron pipe and fixed, cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule etc and fixed of 25mm bore complete all as specified and directed. |
| 101 | Demolition of precast concrete work/ block walling built in cement mortar complete all as directed. |
| 102 | Material and labour for PCC solid block masonry (1:3:6) (using 20mm graded stone aggregate) straight or curved on plan exc 6m mean radius, exc 10cm in width and built in CM (1:6) complete all as specified and as directed |
| 103 | Taking out old unserviceable PVC Pipe of size 75mm , 110mm & 150mm from trenches and walls with all fittings incl necessary excavation,RFR and Removal upto 250 mtrs all as specified and directed. |
| 104 | S&F150mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed. |
| 105 | S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints,fixed to walls complete all as specified and as directed. |
| 106 | S&F110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints,fixed to walls complete all as specified and as directed. |
| 107 | S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints,fixed to floors complete all as specified and as directed. |
| 108 | S&F110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints,fixed to floors complete all as directed. |
| 109 | Refixing old pipes after taking down any dia complete all as directed. |
| 110 | S&F 75mm dia PVC (SWR) bend with oval access door complete all as directed. |
| 111 | S&F 110mm dia PVC (SWR) bend /shoe without oval access door complete all as directed. |
| 112 | S&F110mm dia PVC (SWR) branch piece (single Y)equal or unequal with oval access door complete all as directed. |
| 113 | S&F75 mm dia PVC (SWR) branch piece (single Y)equal or unequal with oval access door complete all as directed. |
| 114 | S&F PVC (SWR) cowls 110mm dia complete all as directed. |
| 115 | S&F PVC (SWR) cowls 75 mm dia complete all as directed. |
| 116 | S & F 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door complete all as directed. |
| 117 | S & F 75 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door complete all as directed. |
| 118 | Excavation in trenches in hard / dense soil n.exc. 1.5M wide and n.exc. 1.5M deep and getting out all as specified and directed by Engineer-in-Charge. |
| 119 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soils complete all as directed. |
| 120 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m complete all as directed. |
| 121 | S&F in repair PVC (SWR) floor trap,plain with CP grating 75/ mm with incl jointing with solvent cement complete all as directed. |
| 122 | S&F in repair PVC (SWR) floor trap,plain with CP grating 110 mm with incl jointing with solvent cement complete all as directed. |
| 123 | S&F in repair 75 mm PVC nahani trap with grating incl jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as directed. |
| 124 | S&F in repair 110 mm PVC nahani trap with grating incl jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as directed. |
| 125 | Dismantling of Stone sett paving/inetrlocking tiles of any description or thickness laid dry or laid dry and pointed and remove from MoD Land complete all as specified and as directed. |
| 126 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand, complete all as directed. |
| 127 | M&L Sand filling under floors or in foundations including well ramming and watering for consolidation all as specified and directed |
| 128 | M&L for laying PCC (1:2:4) type B2 (using 40mm graded aggregate) for sub base and mass concrete in foundation complete all as directed. |
| 129 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as directed. |
| 130 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as manufacturers instruction and as directed. |
| 131 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as in ridges, hips, valley gutter, drip, and straight flashing complete all as specified and as directed |
| 132 | S & F Aluminium flat iron work in, wind ties screwed as directed, including all necessary drilling, bolting or riveting etc., and similar work complete all as specified and as directed |
| 133 | S&F in repairs mild steel work in Tubular Trusses, Posts etc including special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS - 1161-1979, Grade St - 240, Medium Grade of any dia complete all as specified and as directed by Engineer in charge |
| 134 | S & F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming to Fe-410 W (Grade E-250) quality A complete all as directed. |
| 135 | S & F Mild steel screw bolts (machine made) 5 to 10 mm dia with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n.exc. 10 cm long complete all as directed. |
| 136 | Dismantling of wall / ceiling boards (fiber, pulp, insulation etc) / insulation boards /slabs/blankets of any thickness including cover fillets ridges etc, complete all as specified and directed. |
| 137 | Providing & fixing false ceiling with semi perforated 12mm thick micro tegular edged GRG false ceiling tiles at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1 OOOmm length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in Charge. |
| 138 | S&F in replacement ceramic One Piece Water Closet including soft self closing seat cover and all necessary fittings of suitable size all as per Hindware cat part No 20107 (P-18/S-22) or equivalent as approved complete all as spd and directed by Engineer-In-Charge. |
| 139 | S&F in repair Vitreous China Table top wash hand basin of suitable size incl complete necessary fittings excluding taps all as per Hindware cat part no 91088 model PEARL of Italian collection. or equivalent as approved excluding taps complete all as specified and directed., Hindware (Ist Quality). |
| 140 | Taking down gear operated rolling shutter of any area and any thickness of laths including top cover, spring and shaft, gear box and rod, side guide channels etc complete all as specified and as directed by Engineer in charge |
| 141 | S & F Steel rolling shutters, gear operated type bevel gear box and crank handle steel rolling shutters (lath thickness 1.25mm ) without ball bearing, as specified incl top cover, anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated complete all as specified and as directed by Engineer in charge |
| 142 | S & F Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and as directed by Engineer in charge |
| 143 | S & F Ball bearing for rolling shutters complete all as specified and as directed by Engineer in charge Please Enable Macros to View BoQ information |
