Tender For Periodical Services To Md Accn In Akhnoor Mil Station Under Ge (S) Akhnoor
Tender Value
25 Lakhs
Estimated cost
Bid Submission
09 Jul 2026
2 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Akhnoor → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Periodical Services To Md Accn In Akhnoor Mil Station Under Ge (S) Akhnoor
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed. |
| 2 | M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces of wall , finished even & smooth without using extra cement, complete all specified and directed. |
| 3 | M&L for rendring 15mm thick in cement mortar 1:6 on fair faces of brick/concrete surfaces of wall finished even and smooth without using extra cement, complete all as specified and directed. |
| 4 | M&L for rendering 5mm thick in cement mortar 1:3 on ceiling surface finished even and fair to receive tiles complete all as specified and directed. |
| 5 | M&L for applying wall putty 2mm thick over & above, complete treated or untreated surface complete all as specified and directed by Engineer -in - Charge. |
| 6 | M&L for preparation of newly plastrered surface of any description and applying two coat of exterior emulsion paint as approved over a coat of primer, complete all as specified and directed. |
| 7 | M&L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer, complete all as specified and directed. |
| 8 | M&L for prepration of new plastered surfaces of ceiling and applying two coat of oil bound distemper, complete all as specified and directed. |
| 9 | M&L for preparation of old plastered or painted surfaces of wall by complete removing of existing treatment (scrubbing, washing down etc) complete all as specified and directed. |
| 10 | M&L for applying wall putty 1mm thick over and above complete treated or untreated surfaces, complete all as specified and directed. |
| 11 | M&L for applying one coats of oil bound distemper, complete all as specified and directed. |
| 12 | M&L for applying one coat of exterior emulsion paint, complete all as specified and directed. |
| 13 | M&L for prepration of old surfaces of ceiling and applying one coat of oil bound distemper, complete all as specified and directed. |
| 14 | M&L for applying one coat of cement base paint, complete all as specified and directed. |
| 15 | M&L for preparing old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed. |
| 16 | M&L for one coat of synthetic enamel paint on old painted wooden surfaces of any description over 10 cm width or girth, complete all as specified and directed. |
| 17 | Demolition brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work and precast concrete articles, complete all specified and directed. |
| 18 | M&L for brick work with sub class 'B' bricks old size straight or curved in plane exc 6m mean radius built in cement mortar 1:6, complete all as specified and directed. |
| 19 | Description all as per serial item No. 18 here in above but except brick, complete all as specified and directed. |
| 20 | Dismantling old damaged board as in shelf, complete all as specified and directed. |
| 21 | S&F for 2nd class soft wood plain fillet size exc.13 sqcm & n.exc 25 sqcm square, rectangular, triangular in section clean swan and plained, secured witrh nails or brads, complete all as specified and directed. |
| 22 | S&F in repair for 18/19 mm thick prelaminated particle board, interior grade, Prelaminated one side decorative choice lamination & other side balancing white lamination,fixed with screws to timber frame work, complete all as specified and as directed. |
| 23 | S&F for continuous (piano) hinges, 40mm open flap width mild steel, bright finish or electrogalvanised, complete all as specified and directed. |
| 24 | S&F for magnet catcher 50mm for shutters of approved quality complete all as specified and directed. |
| 25 | S&F for hasp and staple 125mm long safety type, of aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screw as in cupboard and locker, complete all as specified and as directed. |
| 26 | S&F for 75mm extruded aluminium alloy handles, (ISI marked) febricated type, anodised, complete all as specified and directed. |
| 27 | S&F in repair for stainless steel wire cloth, 0.36mm noimnal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple, complete all as specified and directed. |
| 28 | M&L for hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and directed. |
| 29 | S&F for 3mm thick sheet glass, ordinary quality glazing with oil putty in square n exc 0.50 sqm in each pane, complete all as specified and directed. |
| 30 | S&F for 3mm thick sheet glass, ordinary quality glazing with oil putty in square exc 0.50 sqm in each pane, complete all as specified and directed. |
| 31 | S&F for figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane, complete all as specified and directed. |
| 32 | S&F for in repair 100mm extruded aluminium alloy handles, (ISI marked) febricated type, anodised, complete all as specified and directed. |
| 33 | S&F for in repair 125mm extruded aluminium alloy handles, (ISI marked) febricated type, anodised, complete all as specified and directed. |
| 34 | S&F for in repair 100mm long aluminum anodised barrel tower bolts (ISI marked) of extruded section, complete all as specified and directed. |
| 35 | S&F for in repair 125mm long aluminum anodised barrel tower bolts (ISI marked) of extruded section, complete all as specified and directed. |
| 36 | S&F in repair 250mm long aluminum alloy anodised sliding door bolts with hasp & staple & fixing clips of sheet cast extruded section & fixing bolts & sliding bolts of extruded section (ISI marked), complete all as specified and directed. |
| 37 | S&F in repair mild steel 300mm, ordinary rat tail rod pattern springs, including roller and roller plate in wood/stone/concrete/ pressed mild steel chowkhat by modes of screw/ welding machine as required and directed (ISI marked), complete all as specified and directed. |
| 38 | S&F for rotational moulded PVC water tanks of 500 ltrs capacity, cylinderical vertical with closed top hoisted and fixed in position including 01 PTMT float valve,aluminium rod, ball and 2 nos PTMT tank nipple of 15/20mm in each tank as required, including dismentling existing tank and removing from site, complete all as specified and directed. |
| 39 | Cleaning and removing all scale dirt etc. from overhead PVC tank 500/1000 ltr existed on approachable or non approachable roof upto four storey and from mouth of circulating pipes including dismantling and refixing in position, connecting all accessories after cleaning, complete all as specified and directed. |
| 40 | S&F in repair for 600mmx450mm bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with steel screw and cup, complete all as specified and directed. |
| 41 | S&F in repair for 15mm bore bib tap long nose/long body cast copper alloy CP fancy type with capstan head handle, screwed down, screwed for brass, ferrule and fixed, complete all as specified and directed. |
| 42 | S&F in repair for bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm-25gms), complete all as specified and directed. |
| 43 | S&F in repair for 15mm bore stop valves, chromium plated fancy type cast copper alloy, half turn, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed. |
| 44 | S&F in repair for gun-metal, globe or gate valves, for 15mm bore dia of pipe in mm with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and as directed. |
| 45 | S&F in repair for gun-metal, globe or gate valves, for 20mm bore dia of pipe in mm with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and as directed. |
| 46 | S&F in repair for stainless steel 20mm dia curtain rod, complete all as specified and directed. |
| 47 | S&F in repair for stainless steel (with or without glass design ) end balls premium quality for curtain rod complete all as specified and directed. |
| 48 | S&F in repair for stainless steel wall or end bracket premium quality for curtain rod complete all as specified and directed. |
| 49 | S&F in repair for glass shelf rectangular size 600mm x150mm, 5mm thick glass with ABS chromium plated bracket as per sample kept in AGE B/R Office, complete all as specified and directed. |
| 50 | S&F in repair for glass shelf rectangular size 230mm radius, 5mm thick glass with ABS chromium plated bracket as per sample kept in AGE B/R Office complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 18, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysJul 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender