|
| 1 | CHAIR SCHOOL WITH HAND BOARD (Drg No TP-Godrej/FD/E6/MAP/05)S&F in repairs PVC seat made of 4mm thick with 4x10 mm ribs moulded integrally and fitted to the frame with Aluminum alloy screws complete all as specified and as directed. |
| 2 | S&F in repairs 18 mm thick pre-laminated MDF Board of exterior grade and edges with 1.5 mm thick PVC beading with wire nails as hand board complete all as specified and as directed. |
| 3 | M&L for Welding the disjointed MS plain bar shelf under the seat wherever required complete all as specified and as directed. |
| 4 | M&L for painting the steel frame of chair with & including applying two coats of black synthetic enamel paint over & including a coat of red oxide primer complete all as specified and as directed. |
| 5 | S&F in repairs PVC shoe cap complete all as specified and as directed. |
| 6 | CHARPOY GI PIPE ( Drg No FD-220/CEKZ/TD/556)Removing the unserviceable ply /nylon/newar from the charpoy GI Pipe complete all as specified and as directed. |
| 7 | M&L for tightening the legs, junction points of long rail & short rail with pipe wrench, duly fixing with existing check nuts so that the item becomes stable complete all as specified and as directed. |
| 8 | S&F 32 mm dia GI Pipe medium grade long rail of 1890 mm long duly threaded the ends upto 22 mm size (as shown in drawing) including removing the old unserviceable long rail (whose thread ends are broken either at one end or both) by loosing existing check nuts and elbows complete all as specified and as directed. |
| 9 | Removing existing unserviceable short rail (whose thread ends were cracked) and fixing of 32 mm dia GI Pipe medium grade short rail of 813 mm long, 32mm dia GI pipe retrived from long rail (obtained from demolition of BoQ Serial item No 2.02 above), duly threaded the ends upto 22 mm size as shown in the drawing complete all as specified and as directed. Note : Ref drawing No FD-220 and CEKZ/TD/556 |
| 10 | Removing existing unserviceable leg (whose thread ends were cracked) and fixing of 32 mm dia GI Pipe medium grade leg of 410 mm long, 32mm dia GI pipe retrived from long rail/short rail(obtained from demolition of BoQ Serial item No 2.02 above) duly provided with 6 mm thick MS base plate duly welded & duly painted with two coats of black paint as shown in the drawing complete all as specified and as directed. |
| 11 | S&F in repairs 32mm dia 3 way elbow (ISI marked) for the joints of long /short rails as shown in the drawing complete all as specified and as directed. |
| 12 | S&F in repairs 6mm thick check nut for the corner joints of long/short rails as shown in the drawing complete all as specified and as directed |
| 13 | S&F 25mm dia medium grade GI pipe short rail of 890 mm long duty welded the ends to the long rail at an equal distance as shown in the drawing for resting the ply top for each charpoy GI and 6mm thick MS Plate size (120mm x 20mm) duly welded and painted to enable connecting 25mm dia GI pipe & 32 mm dia GI pipe from undemeath rails for better grip while placing the ply top complete all as specified and as directed. |
| 14 | S&F 12mm thick BWR Grade Ply wood of size 6'6\\" x 3’ over the Long rails & short rails through drilling holes in ply top and fixed with nickel nut, bolt and washer. The edges of ply should be applied mixture of french chalk powder shellac & solvent and added colour for smooth finish irrespective of drawing complete all as specified and as directed. |
| 15 | TABLE CLERK STEEL/ TYPIST STEEL(Drg No FD-84(M)/381/1004/1005)S&F in repairs drawer of Table Clerk Steel and Typist Steel with & including applying two coats of olive green paint over a coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 16 | S&F in repairs 19mm thick pre laminated MDF Board exterior grade on table top of Table Clerk Steel/ Typist steel with & including 2 mm thick PVC beading alround the top complete all as specified and as directed. |
| 17 | Preparation of old painted steel surfaces of Table Office Clerk Steel / Typist Steel by scraping with emery paper, cleaning, re-dusting, making the surface smooth and M&L for applying one coat of synthetic enamel paint of approved shade complete all as specified and as directed. |
| 18 | S&F in repairs 25 mm Square MS pipe of 16 guage thick standard steel for Tables complete all as specified and as directed. |
| 19 | S&F in repairs hard rubber shoes of steel table's legs complete all as specified and as directed. |
| 20 | S&F in repairs 4 lever lock with flat type SS key in duplicate for Steel Tables Office Clerk Steel complete all as specified and as directed. |
| 21 | S&F in repairs PVC receased handles for Steel Tables Drawer complete all as specified and as directed. |
| 22 | TABLE OFFICE OFFICER STEEL (Drg No FD-84(M)/1002/1003)S&F in repairs drawer of Table Office Officer Steel with & including two coats of synthetic enamel paint (Colour/shed as approved) over & including a coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 23 | S&F in repairs 19mm thick pre laminated MDF Board exterior grade a on table top of Table Office Officer Steel with & including 2mm thick teakwood beading alround the top complete all as specified and as directed. |
| 24 | Preparation of old painted steel surfaces of Table Office Officer Steel by scraping with emery paper, cleaning, re-dusting, making the surface smooth and M&L for applying one coat of synthetic enamel paint (Colour/shed as approved) complete all as specified and as directed. |
| 25 | S&F in repairs 25 mm Square MS pipe of 16 guage thick standard steel for Tables complete all as specified and as directed. |
| 26 | S&F in repairs hard rubber shoes for table legs complete all as specified and as directed. |
| 27 | S&F in repairs 4 lever lock with flat type SS key in duplicate for Tables Office Steel complete all as specified and as directed. |
| 28 | S&F in repairs PVC receased handles for Steel Tables Drawer complete all as specified and as directed. |
| 29 | CHAIR CB STEEL WITH OR WITHOUT ARMS (Drg No FD-75(M))S&F in repairs 25 mm dia, 16 Gauge thick MS conduit pipe of required length/size to be fixed duly arc welded and level the surface to make smooth and painted with one coat of Red oxide zinc chrome primer without disturbing the adjoining parts complete all as specified and as directed. |
| 30 | Preparation of surface for painting by scraping old /fainted paint with sand paper/ machine or emery paper as applicable to make surface smooth and filing uneven gaps with putty there by make equal level with adjacent surfaces and M&L for applying two coats of synthetic enamel paint (Colour/shed as approved) of chair CB Steel with arms and without arms complete all as specified and as directed. |
| 31 | S&F in repairs Seat frame made out of Ist class Teak Wood and canned with 2 mm wide and 0.4 mm thick gola type of approved colour and 4 mm wide thick cane for borders and the frames shall be polished or painted as required to match the existing and fixed with 4 No GI Nut and bolts of size 3\\" long with washers complete all as specified and as directed. |
| 32 | All as per BOQ Serial item No 5.02 above but Back frame complete all as specified and as directed. |
| 33 | S&F in repairs Arm rest made out of Ist class Teak wood duly french polished and fixed with MS screw complete all as specified and as directed. |
| 34 | S&F in repairs hard rubber bush with MS screw for Chair CB steel with arms and without arms complete all as specified and as directed. |
| 35 | S&F in repairs hard rubber cap for rear leg top side to be fixed for open end of the conduit pipe of Chair CB steel with arms and without arms complete all as specified and as directed. |
| 36 | ALMIRAH LARGE STEEL (Drg No :- FD-67/109M)/114 (M)/351/1031/1033/FD/E6/MAP/18)S&F in repairs 6 lever lock with duplicate Flat key (2 Nos of key) with existing size fixed with screw/ welding to shutter of Almirahs complete all as specified and as directed. |
| 37 | S&F in repairs 3-way Assembly including 6mm thick round bars with necessary fittings of approved quality for Almirah complete all as specified and as directed. |
| 38 | S&F in repairs CP handle of Godrej pattern with necessary fixing accessories of approved quality complete all as specified and as directed. |
| 39 | S&F in repairs bottom made out of 1mm thick MS sheet made to shape and size as per drawing and fixing by welding matching with existing almirah and M&L for applying two coat of synthetic enamel paint over & including a coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 40 | S&F in repairs legs made out of 1mm thick of MS sheet and fixed with welding/riveteting for the bottom portion as per existing size and M&L for painting with two coats of synthetic enamel paint over & including a coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 41 | S&F in repairs of new MS hinges or U clips of same shape & size as existing in steel almirah duly welded complete all as specified and as directed. |
| 42 | S&F in repairs shelves made out of 1mm thick MS sheet made to shape and size as per drawing and fixing with cleats, nuts and bolts complete all as specified and as directed. |
| 43 | Taking down of door shutter of Almirahs and bringing the item to the original shape and refixing the repaired door shutters with suitable hinges complete all as specified and as directed. |
| 44 | Taking down of existing dented shelves from Almirahs steel bringing the item to the original shape and refixing the shelves with necessary cleats/nuts/bolts including M&L for applying two coat of synthetic enamel paint over & including a coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 45 | ALMIRAH MEDIUM STEEL (Drg No :- FD-110(M)/108(M))/243/350/1032/1034)S&F in repairs 6 lever lock with duplicate Flat key (2 Nos of key) with existing size fixed with screw/ welding to shutter of Almirahs complete all as specified and as directed. |
| 46 | S&F in repairs 3-way Assembly including 6mm thick round bars with necessary fittings of approved quality for Almirah complete all as specified and as directed. |
| 47 | S&F in repairs handle of Godrej pattern with necessary fixing accessories of approved quality complete all as specified and as directed. |
| 48 | S&F in repairs bottom made out of 1mm thick MS sheet made to shape and size on drawing and fixing by welding matching with existing almirah and M&L for applying two coat of synthetic enamel paint over & including a coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 49 | S&F in repairs leg made out of 1mm thick of MS sheet and fixed with welding/riveteting for the bottom portion as per existing size and M&L for applying two coats of synthetic enamel paint over & including a coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 50 | S&F in repairs new MS hinges or U clips of same shape & size as existing in steel almirah by fixing duly welded complete all as specified and as directed. |
| 51 | S&F in repairs new shelves made out of 1mm thick MS sheet made to shape and size on drawing and fixing with cleats, nuts and bolts complete all as specified and as directed. |
| 52 | Taking down of door shutter of Almirah and bringing the item to the original shape and refixing the repaired door shutters with suitable hinges complete all as specified and as directed. |
| 53 | Taking down of existing dented shelve from Almirah steel bringing the item to the original shape and refixing the shelve with necessary cleats/nuts/bolts including M&L for applying two coats of synthetic enamel paint over & including a coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 54 | LOCKER/LOCKER BED SIDE STEEL (Drg No :- FD-1029/257)S&F in repairs 6 lever lock with duplicate Flat key (2 Nos of key) with existing size fixed with screw/ welded to shutter of Almirah complete all as specified and as directed. |
| 55 | S&F in repairs hasp and staple as per drg complete all as specified and as directed. |
| 56 | S&F in repairs handle of Godrej pattern with necessary fixing accessories of approved quality complete all as specified and as directed. |
| 57 | S&F in repairs bottom made out of 1mm thick MS sheet made to shape and size on drawing and fixing by welding matching with existing almirah and M&L for applying two coat of synthetic enamel paint over & including a coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 58 | S&F in repairs MS hinges or U clips of same shape & size as existing in steel almirah by fixing duly welded complete all as specified and as directed. |
| 59 | S&F in repairs shelves made out of 1mm thick MS sheet made to shape and size on drawing and fixing with cleats, nuts and bolts complete all as specified and as directed. |
| 60 | Taking down of door shutter of locker and bringing the item to the original shape and refixing the repaired door shutters with suitable hinges complete all as specified and as directed. |
| 61 | Taking down of existing dented shelve from Locker steel bringing the item to the original shape and refixing the shelve with necessary cleats/nuts/bolts including M&L for applying two coat of synthetic enamel paint over & including a coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 62 | RACK SHOE STEEL (Drg No :FD/E6/MAP/02/FD/E6/MAP/02(R))S&F in repairs 25 mm dia, 16 Gauge thick MS conduit pipe of required length/size to be fixed complete all as specified and as directed. |
| 63 | S&F in repairs 6 mm dia MS rod of required length/size to be fixed complete all as specified and as directed. |
| 64 | Preparation of old steel surfaces by scraping with emery paper, cleaning, reducing, making the surfaces smooth and applying putty wherever required and M&L for applying one coat of synthetic enamel paint of black shade complete all as specified and as directed. |
| 65 | CHARPOY WITH HARDTOP (Drg No FD/MAP-II/01)S&F in repairs long rail of 25x65 mm, 16 Gauge thick MS Tube of required length/size duly welded/screwed complete all as specified and as directed. |
| 66 | S&F in repairs 32x32 mm, 16 Gauge thick MS Tube of required length/size to be fixed duly welded/screwed complete all as specified and as directed. |
| 67 | S&F in repairs 25x25 mm, 16 Gauge thick MS Tube of required length/size to be fixed duly welded/screwed complete all as specified and as directed. |
| 68 | S&F in repairs 12mm thick BWR Grade Ply wood of size 6'6\\" x 3’ over the Long rails & short rails fixed with nickel nut, bolt and washer. The edges of ply should be applied mixture of french chalk powder shellac & solvent and added colour for smooth finish irrespective of drawing complete all as specified and as directed. |
| 69 | Preparation of old steel surfaces by scraping with emery paper, cleaning, reducing, making the surfaces smooth and applying putty wherever required and M&L for applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 70 | S&F in repairs Hard rubber toe complete all as specified and as directed. |
| 71 | All as per BoQ Serial Item No.10.00 above but short rail complete all as specified and as directed. |
| 72 | BED HARD STEEL (Drg No : FD/E6/MAP/08,)Removing of old paint and preparing the surface by applying putty and M&L for applying one coat of red oxide primer after welding wherever required (legs/rails) over & including applying two coats of synthetic enamel paint black colour to match as per standard drawing complete all as specified and as directed. |
| 73 | S&F in repairs 12mm thick BWR plywood of exterior grade and fixing the same with screws 4mm thick alongwith washers including S&F of new hard rubber shoes (4 Nos) for each bed complete all as specified and as directed. |
| 74 | S&F in repairs head board made out of pre laminated MDF board 18 mm exterior grade ISI marked teak face and PVC edging all around as shown on drawing complete all as specified and as directed. |
| 75 | S&F in repairs foot board made out of pre laminated MDF board 18 mm exterior grade ISI marked teak face and PVC edging all around as shown on drawing complete all as specified and as directed. |
| 76 | CHAIR COMPUTER/ REVOLVING (Drg No : TP-Godrej/Aristo/Raj & Raj and FD/E6/MAP/01)S&F in repairs Twin Castor wheel of size 50mm dia as per sample of Chair computer / revolving low or high back complete all as specified and as directed. |
| 77 | S&F in repairs Stainless Steel Pedestal assembly complete all as specified and as directed. |
| 78 | S&F in repairs Acrylic fabric for seat and back as per approved colour and shade with & including S&F transparent plastic dust sheet covers for seat and back complete all as specified and as directed. Note: (i) Unit shall be each seat and each back(ii) Rate of cloth should not be less than 420.00 per sqm |
| 79 | S&F in repairs Gas lift rod with proper adjusting tilt complete all as specified and as directed. |
| 80 | S&F in repairs Arm rest pair complete all as specified and as directed. |
| 81 | S&F in repairs Polyurethane foam of 50 mm thick of density 40 best quality for seat and back with PVC lipping complete all as specified and as directed. |
| 82 | HOT-FOOD TROLLEY (Drg No CWE/CAL/FUR/01) S&F in repairs Heavy duty ball-bearing rubber wheel of 150mm dia complete all as specified and as directed. |
| 83 | S&F in repairs Collapseable front counter of size (390mm (L) x 500 mm (W)) for wheel base and complete all as specified and as directed. |
| 84 | S&F in repairs Brass hasp & staple as per sample for shutter complete all as specified and as directed. |
| 85 | S&F in repairs Brass safety locking hinges of 180 mm long for lid with nut & bolt complete all as specified and as directed. |
| 86 | S&F in repairs 100 mm long Stainless steel handle complete all as specified and as directed. |
| 87 | S&F in repairs SS container 215mm dia x 225mm deep made out of 19 gauge 304-grade Stainless steel alongwith SS Lid complete all as specified and as directed. |
| 88 | M&L for painting bottom MS portion of the trolley with two coats of synthetic enamal paint over & including a coat of red oxide Zinc chrome primer of approved shade after preparation of surfaces complete all as specified and as directed. |
| 89 | S&F in repairs MS bracket for wheel and complete all as specified and as directed. |
| 90 | S&F in repairs 15 amp socket of approved make complete all as specified and as directed. |
| 91 | S&F in repairs 5 amp 3 pin plug top of approved make complete all as specified and as directed. |
| 92 | S&F in repairs Movable refrigerator type Stainless steel rack as per sample complete all as specified and as directed. |
| 93 | S&F in repairs anodised SS receding doors for food chamber as per sample complete all as specified and as directed. |
| 94 | S&F in repairs 12 mm dia and 40 mm long Stainless steel Nut & bolt complete all as specified and as directed. |
| 95 | S&F in repairs 6 mm dia and 25 mm long Stainless steel Nut & bolt and complete all as specified and as directed. |
| 96 | M&L for Buffing/polish the Stainless steel surface of the item both inner and outer surface after prepration of surface with buffer machine for scratch-free glossy shine finish after necessary repairs complete all as specified and as directed. |
| 97 | M&L for Greasing the ball-bearing of wheel of serviceable wheel for smooth movement complete all as specified and as directed. |
| 98 | CHAIR EASY (CUSHIONED) STEEL (Drg No :-FD-121 (M) ) S&F in repairs Legs of 19 mm square MS pipe 16 gauge of length 510 mm complete all as specified and as directed. |
| 99 | S&F in repairs Seat base rail of 19 mm square MS pipe 16 gauge of length 700 mm complete all as specified and as directed. |
| 100 | S&F in repairs Teak wood Hand rest of size 19 mm x 65 mm of length 700 mm duly french polished and fixed with screws complete all as specified and as directed. |
| 101 | S&F in repairs 50 mm thick, 40 D foam of size 560 mm x 635 mm, duly covered with approved shade leatherite over the existing 12 mm thick Teak wood plank as per drg of seat base complete all as specified and as directed.Note : Cost of leatherite cloth shall not be less than Rs 350.00 per mtr. |
| 102 | S&F in repairs 25 mm thick, 40 D foam of size 560 mm x 355 mm, duly covered with approved shade leatherite over the existing 12 mm thick Teak wood plank as per drg of back rest base complete all as specified and as directed. Note : Cost of leatherite cloth shall not be less than Rs 350.00 per mtr. |
| 103 | S&F in repairs 20 mm X 3 mm MS Flat iron cleats between Hand rest and MS square pipes with steel screws complete all as specified and as directed. |
| 104 | S&F in repairs metal clamp at back side of seat rest to be refixed with steel srews complete all as specified and as directed. |
| 105 | S&F in repairs Hard rubber shoes as per sample complete all as specified and as directed. |
| 106 | TABLE COMPUTER (Drg No :- FD/E6MAP/03)S&F 18mm Pre-laminated MDF board (900x600mm) for table top with 2mm PVC beading of Table Computer, rest all as shown on drg complete all as specified and as directed. |
| 107 | S&F in repairs powder coated telescopic steel channel in black paint for key board plank of Table Computer, all as shown on drg complete all as specified and as directed. |
| 108 | S&F in repairs 18mm pre-laimnated MDF board for keyboard tray with matching PVC edging all around all as shown on drg complete all as specified and as directed. |
| 109 | Removal of existing worn out painting from in side & outside including prepartion of surface frame and M&L for applying two coats of synthetic enamel paint over & including a coat of red oxide primer, all as shown on drg complete all as specified and as directed. |
| 110 | TABLE BEDSIDE STEEL (HOSPITAL) (Drg No :- FD-133) S&F in repairs legs made out of 25 mm dia of 16 gauge MS tube made to shape and welded with frame including denting, welding as specified and shown on drg complete all as specified and as directed. |
| 111 | S&F in repairs long rail of 500 mm long made out of 20 mm dia 16 gauge MS tube complete all as specified and as directed. |
| 112 | S&F in repairs short rail of 300 mm long made out of 20 mm dia 16 gauge MS tube complete all as specified and as directed. |
| 113 | S&F in repairs 100 mm long handle CP fixed with srews complete all as specified and as directed. |
| 114 | M&L for Buffing/machine polish to Table Bed Side Hospital outer surface complete all as specified and as directed. |
| 115 | TABLE BEDSIDE STEEL MAP (Drg No FD/E6/MAP/15 ®)S&F in repairs Top of 18mm thick exterior Grade prelaminated MDF Board of existing shade both side laminated with light wall nut shade as approved complete all as specified and as directed. |
| 116 | S&F in repairs side of 18mm thick exterior Grade prelaminated MDF Board of existing shade both side laminated with light wall nut shade as approved complete all as specified and as directed. |
| 117 | S&F in repairs telescopic Channel for smooth functioning all as shown on drg complete all as specified and as directed. |
| 118 | M&L for applying two coats of synthetic enamel paint over & including a coat of red oxide primer to all steel surface complete all as specified and as directed. |
| 119 | S&F in repairs Knob as approved complete all as specified and as directed. |
| 120 | S&F in repairs Hard Rubber Shoe as approved complete all as specified and as directed. |
| 121 | CHAIR VARENDAH (MS) (Drg No FD-19,256, 359) S&F in repairs 20 mm dia, 16 Gauge thick MS conduit pipe of required length/size to be fixed duly arc welded and level the surface to make smooth and painted with one coat of Red oxide zinc chrome primer complete all as specified and as directed. |
| 122 | S&F in repairs MS rod of 10 mm dia as connector of the front legs for Chair Verandah MS complete all as specified and as directed. |
| 123 | M&L for removing of worn-out unserviceable cane & preparation of surface for painting by scraping old /fainted paint with sand paper/ machine or emery paper as applicable to make surface smooth and filing uneven gaps with putty there by make equal level with adjacent surfaces and M&L for applying two coats of synthetic enamel paint (Colour/shed as approved) complete all as specified and as directed. Note : Ref drawing No FD-19,256,359 |
| 124 | S&F caning with approved shade of plastic cane of 4 mm wide, 0.5 mm thick half-round as per Godrej pattern white in colour as shown in the drawing \\"Mat pattern\\" for Chair Verandah MS complete all as specified and as directed. |
| 125 | S&F in repairs PVC shoe cap for Chair Verandah MS after with and including dismantling of worn out damaged unserviceable one complete all as specified and as directed. |
| 126 | TEAPOY VARENDAH (Drg No :FD-255/FD/E6/MAP/17)S&F in repairs 20 mm dia, 16 Gauge thick MS conduit pipe of required length/size to be fixed duly welded/screwed complete all as specified and as directed. |
| 127 | S&F in repairs 19 mm thick pre laminated MDF board exterior grade as table top with & including 2mm thick PVC beading all round the top complete all as specified and as directed. |
| 128 | Preparation of surface for painting by scraping old /fainted paint with sand paper/ machine or emery paper as applicable to make surface smooth and filing uneven gaps with putty there by make equal level with adjacent surfaces and M&L for applying synthetic enamel paint (Colour/shed as approved) complete all as specified and as directed. |
| 129 | S&F in repairs Hard rubber toe complete all as specified and as directed. |
| 130 | CHARPOY IP FOLDING (Drg No FD-388R) S&F in repairs 12 mm thick plywood top BWR grade complete all as specified and directed. |
| 131 | S&F in repairs hard rubber shoe std quality complete all as specified and as directed. |
| 132 | M&L for Welding work wherever required as per directions complete all as specified and as directed. |
| 133 | BED STAND IRON HOSPITAL (HOSCO) (Drg No HFD-2001)S&F in repairs 125 mm dia castor wheel for Bed stead iron complete all as specified and as directed. |
| 134 | S&F in repairs 18mm thick pre laminated MDF Board for head board of Bed stand iron hospital (HOSCO) complete all as specified and as directed. |
| 135 | S&F in repairs foot board of bed stand iron hospital complete all as specified and as directed. |
| 136 | ICU BED ELECTRIC (Drg No TP)S&F in repairs Head Board Panel for ICU Bed Electric complete all as specified and as directed. |
| 137 | S&F in repairs Foot Board Panel for ICU Bed Electric complete all as specified and as directed. |
| 138 | S&F in repairs ABS Bed Side Butterfly Railing for ICU Bed Electric complete all as specified and as directed. |
| 139 | S&F in repairs Central Locking System for ICU Bed Electric complete all as specified and as directed. |
| 140 | PAINTING : Preparation of old steel surfaces before painting by paint remover / scraping with emery paper, cleaning, reducing,removal of dent making the surfaces smooth and applying putty wherever required and M&L for applying two coat of synthetic enamel paint (Colour/shed as approved) inside and out side over & including a coat of red oxide through spray machine to Almirah large steel with shelves complete all as specified and as directed. NOTES:- (i) Work shall be executed where the furniture article exist in different user unit, Md accn of AoR of GE Alipore and BSO's furniture yard as directed by Engr in Charge.(ii) Ref drawing No FD-67/109M)/114 (M)/351/1031 /1033/FD/E6/MAP/18 |
| 141 | All as per BoQ Serial Item No.23.00 above but Almirah medium steel with shelves and complete all as specified and as directed.NOTES:- (i) Work shall be executed where the furniture article exist in different user unit, Md accn of AoR of GE Alipore and BSO's furniture yard as directed by Engr in Charge.(ii) Ref drawing No FD-243/1032 |
| 142 | All as per BoQ Serial Item No.23.00 above but Almirah large glazed steel with shelves and complete all as specified and as directed.NOTES:- (i) Work shall be executed where the furniture article exist in different user unit, Md accn of AoR of GE Alipore and BSO's furniture yard as directed by Engr in Charge.(ii) Ref drawing No FD-104(M) |
| 143 | All as per BoQ Serial Item No.23.00 above but Almirah medium steel with shelves 1/2H, 1/2SH and complete all as specified and as directed.NOTES:- (i) Work shall be executed where the furniture article exist in different user unit, Md accn of AoR of GE Alipore and BSO's furniture yard as directed by Engr in Charge.(ii) Ref drawing No FD-114 |
| 144 | All as per BoQ Serial Item No.23.00 above but Book Shelf Open large steel and complete all as specified and as directed.NOTES:- (i) Work shall be executed where the furniture article exist in different user unit, Md accn of AoR of GE Alipore and BSO's furniture yard as directed by Engr in Charge.(ii) Ref drawing No FD-69(M) |
| 145 | All as per BoQ Serial Item No.23.00 above but Rack Side 3/4 spaces steel and complete all as specified and as directed.NOTES:- (i) Work shall be executed where the furniture article exist in different user unit, Md accn of AoR of GE Alipore and BSO's furniture yard as directed by Engr in Charge.(ii) Ref drawing No TP |
| 146 | All as per BoQ Serial Item No.23.00 above but Rack Side with tray (size 711x685x254mm) steel and complete all as specified and as directed.NOTES:- (i) Work shall be executed where the furniture article exist in different user unit, Md accn of AoR of GE Alipore and BSO's furniture yard as directed by Engr in Charge.(ii) Ref drawing No FD-97(M)/FD-1023 |
| 147 | All as per BoQ Serial Item No.23.00 above but Locker steel and complete all as specified and as directed.NOTES:- (i) Work shall be executed where the furniture article exist in different user unit, Md accn of AoR of GE Alipore and BSO's furniture yard as directed by Engr in Charge.(ii) Ref drawing No FD-1029 |
| 148 | All as per BoQ Serial Item No.23.00 above but Rack steel adj 6 tier and complete all as specified and as directed.NOTES:- (i) Work shall be executed where the furniture article exist in different user unit, Md accn of AoR of GE Alipore and BSO's furniture yard as directed by Engr in Charge.(ii) Ref drawing No FD-1038 |
| 149 | All as per BoQ Serial Item No.23.00 above but Table bed side steel and complete all as specified and as directed. NOTES:- (i) Work shall be executed where the furniture article exist in different user unit, Md accn of AoR of GE Alipore and BSO's furniture yard as directed by Engr in Charge.(ii) Ref drawing No FD-76/133M/157 |
| 150 | All as per BoQ Serial Item No.23.00 above but couch examination complete all as specified and as directed. NOTES:- (i) Work shall be executed where the furniture article exist in different user unit, Md accn of AoR of GE Alipore and BSO's furniture yard as directed by Engr in Charge.(ii) Ref drawing No FD-122/FD-135 |
| 151 | All as per BoQ Serial Item No.23.00 above but Stool steel and complete all as specified and as directed.NOTES:- (i) Work shall be executed where the furniture article exist in different user unit, Md accn of AoR of GE Alipore and BSO's furniture yard as directed by Engr in Charge.(ii) Ref drawing No FD-81 |
| 152 | All as per BoQ Serial Item No.23.00 above but Step steel 3 tier and complete all as specified and as directed. NOTES:- (i) Work shall be executed where the furniture article exist in different user unit, Md accn of AoR of GE Alipore and BSO's furniture yard as directed by Engr in Charge.(ii) Ref drawing No FD-131 |
| 153 | All as per BoQ Serial Item No.23.00 above but Locker steel 3/4 unit and complete all as specified and as directed. NOTES:- (i) Work shall be executed where the furniture article exist in different user unit, Md accn of AoR of GE Alipore and BSO's furniture yard as directed by Engr in Charge.(ii) Ref drawing No FD-127 |
| 154 | All as per BoQ Serial Item No.23.00 above but Locker steel 6 unit (size 1455 MM (H) x 930 Mm (L) x 430 mm (W)) and complete all as specified and as directed. NOTES:- (i) Work shall be executed where the furniture article exist in different user unit, Md accn of AoR of GE Alipore and BSO's furniture yard as directed by Engr in Charge.(ii) Ref drawing No FD-127 |
| 155 | All as per BoQ Serial Item No.23.00 above but Rack pigeon hole steel (size 1905 mm (H) x 915 mm (L) x 305/610 mm (W)) and complete all as specified and as directed. NOTES:- (i) Work shall be executed where the furniture article exist in different user unit, Md accn of AoR of GE Alipore and BSO's furniture yard as directed by Engr in Charge.(ii) Ref drawing No FD-106. |
| 156 | All as per BoQ Serial Item No.23.00 above but Locker Bedside steel (internal & external) and complete all as specified and as directed. NOTES:- (i) Work shall be executed where the furniture article exist in different user unit, Md accn of AoR of GE Alipore and BSO's furniture yard as directed by Engr in Charge.(ii) Ref drawing No FD-1029/257. |
| 157 | All as per BoQ Serial Item No.23.00 above but Bed stead Iron Hospital Make HOSCO and complete all as specified and as directed. NOTES:- (i) Work shall be executed where the furniture article exist in different user unit, Md accn of AoR of GE Alipore and BSO's furniture yard as directed by Engr in Charge.(ii) Ref drawing No TP-Hosco |
| 158 | All as per BoQ Serial Item No.23.00 above but Double decker charpoy with Ply top and complete all as specified and as directed. NOTES:- (i) Work shall be executed where the furniture article exist in different user unit, Md accn of AoR of GE Alipore and BSO's furniture yard as directed by Engr in Charge.(ii) Ref drawing No GE/ALI/FD/01/09 |
| 159 | All as per BoQ Serial Item No.23.00 above but Bed Hard steel and complete all as specified and as directed. NOTES:- (i) Work shall be executed where the furniture article exist in different user unit, Md accn of AoR of GE Alipore and BSO's furniture yard as directed by Engr in Charge.(ii) Ref drawing No FD/E6/MAP/08 |
| 160 | All as per BoQ Serial Item No.23.00 above but Chair easy cushioned steel and complete all as specified and as directed. NOTES:- (i) Work shall be executed where the furniture article exist in different user unit, Md accn of AoR of GE Alipore and BSO's furniture yard as directed by Engr in Charge.(ii) Ref drawing No FD-121 Please Enable Macros to View BoQ information |
