|
| 1 | Note :The unit rate quoted by the tenderer under Col No (13) of Sch `A’ (BOQ) unless specifically mentioned otherwise such as labour only/fixing only, for all items of works shall be deemed to be including cost of all materials, labour, tools and plants, testing and commissioning of work in position complete as required for entire completion of work. |
| 2 | Plain cement concrete (1:4:8), type D-2, using 40 mm graded mechanically crushed stone aggregates as in sub base ,foundations, filling and mass concrete, in and including demolition of unreinforced cement concrete in ground floors and paving n.exc 15cm thickness (below or above ground level) including removal of rubbish retrieved material to a place earmarked by civic body outside the MoD land , complete all as specified and directed by Engineer-in-Charge. |
| 3 | Plain cement concrete (1:2:4) type B-1 using 20 mm graded mechanically crushed stone aggregates as in lintels upto 1.5m clear span, cills,steps; seismic and other similar bands, plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary form work in and including demolition of unreinforced cement concrete in ground floors and paving n.exc 15cm thickness (below or above ground level) including removal of rubbish retrieved material to a place earmarked by civic body outside the MoD land , complete all as specified and directed by Engineer-in-Charge. |
| 4 | Plain cement concrete ,(1:2:4) type B-1 using 20 mm graded mechanically crushed stone aggregates as in walls or retaining walls,any thickness, size or shape including pilasters, buttressescolumns, pillars, boundary pillars and posts (including caps andbases) in and including demolition of unreinforced cement concrete in ground floors and paving n.exc 15cm thickness (below or above ground level) including removal of rubbish retrieved material to a place earmarked by civic body outside the MoD land , complete all as specified and directed by Engineer-in-Charge. |
| 5 | Broken glass coping on top of walls fixed in cement mortar 1:3, complete all as specified and directed by Engineer-in-Charge. |
| 6 | Brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement sand mortar 1:4 complete in and including demolition of brickwork or stone boulder masonary built in cement mortar including all quoins, arches, pillars etc for area where servicable bricks retrived and including removal of rubbish retrieved material to a place earmarked by civic body outside the MoD land , complete all as specified and directed by Engineer-in-Charge. Note: Servicable bricks retrived from demolition of this item shall be used after proper cleaning and washing of old bricks under item No.06 below. |
| 7 | Brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius (except bricks) built in cement sand mortar 1:4 complete iin and including demolition of brickwork or stone boulder masonary built in cement mortar including all quoins, arches, pillars etc for area where servicable bricks retrived and including removal of rubbish retrieved material to a place earmarked by civic body outside the MoD land , complete all as specified and directed by Engineer-in-Charge. Note: Servicable bricks retrived from demolition item no. 5 above and this items shall be used after proper cleaning and washing of old bricks. |
| 8 | Use & waste of form work to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams;and similar work; vertical or to batte etc of rough finished flat surfaces, complete all as specified and directed by the Engineer in Charge. |
| 9 | Mild steel TMT bars 10 mm dia and over as in reinforcement cut to length , bent to shape required, including cranking, bending spirally for hooping ends for columns, hooking ends and binding with and including mild steel wire annealed not less than 0.90 mm dia, complete all as specified and directed by the Engineer in Charge. |
| 10 | Mild steel TMT bars 5mm dia. and over up to and including 10 mm dia. in stirrups, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia. Or securing with clips , complete all as specified and directed by the Engineer in Charge. |
| 11 | Reinforced Cement concrete (1:1.5:3) type B-1 using 20mm graded crusehd stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, column etc; in and including demolition of cement concrete (reinforced) of any description and in any position and removal of debris outside MoD land & stacking of scrap iron, for credit complete all as specified and directed by Engineer-in-Charge. Note: Steel reinforcement shall be measured and paid for separetely. |
| 12 | Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement in and including taking down cement plaster on brick walls & concrete surfaces & the like including raking out joints, hacking for key, scrubbing down with water etc., any description, and including removal of rubbish retrieved material to a place earmarked by civic body outside the MoD land , complete all as specified and directed by Engineer-in-Charge. |
| 13 | Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement , complete all as specified and directed by Engineer-in-Charge. |
| 14 | Rendering 10 mm thick on concrete surfaces in cement mortar 1:4 finished even and fair without using extra cement , complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
| 15 | Rendering 10 mm thick on concrete surfaces in cement mortar 1:4 finished even and fair without using extra cement , complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
