Tender For Online Complaint Management At Bakloh Under Age(I) Dalhousie Cantt.
Tender Value
18.50 Lakhs
Estimated cost
Bid Submission
15 Jul 2026
4 days left
EMD
37000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
dalhousie → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Online Complaint Management At Bakloh Under Age(I) Dalhousie Cantt.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 27-Jun-2026 | BOQ corrigendum | BOQ | 08-Jul-2026 |
| 2 | 08-Jul-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 15-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Easing of window shutters/CB (One unit shall comprise of one complete window/CB/Showcase irrespective of number of leaves) to ensure smooth closing/opening including tightening of hinges, adjustement of tower bolts, sliding bolt and handles etc complete all as specified. |
| 2 | All as per Srl Item No 1 here-in-before but door shutters (Panelled, Skeleton and PVC doors). |
| 3 | Petty repair to PVC/Panelled/skeleton door shutters by making minor adjustment to hinges etc easing shutter incl taking down of shutter if required and refixing in same position including welding to angle iron chowkhats |
| 4 | Welding in repairs not exceeding 2.5 cm in length & thickness of metal to be welded not exceeding 6 mm complete all as specified including material & labour. |
| 5 | S&F in repair Aluminum, anodized, barrel tower bolt of extruded section 100 mm long, complete all as specified. |
| 6 | S&F in repair Aluminium anodised barrel tower bolt of extruded section 150 mm long, complete all as specified |
| 7 | S&F in repair aluminium anodised barrel tower bolt of extruded section 200 mm long, complete all as specified |
| 8 | S&F in repair 125mm extruded aluminum alloy handle, fabricated type, anodized complete all as specified. |
| 9 | S&F in repair 150mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified |
| 10 | S&F in repair 75mm MS butt hinges medium weight, cold rolled fixed with screws or welded on wooden or steel frame with or without taking off shutter complete all as specified. |
| 11 | S&F in repair 100mm MS butt hinges medium weight cold rolled fixed with screws or welded on wooden or steel frame with or without taking off shutter complete all as specified. |
| 12 | S&F in repair 250mm long Aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified. |
| 13 | S&F in repair 300mm long Aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy, complete all as specified. |
| 14 | S&F in repair 300mm MS ordinary rat tail rod pattern springs incl roller and roller plate complete (Helical door spring) fixed with screws on wooden or welded on steel frame complete all as specified. |
| 15 | S&F in repair aluminum floor door stopper of size 75 mm with two rubber legs all as specified and directed |
| 16 | M&L for 3mm thick plain glass fixing and glazing with oil putty/nails wire including hacking out old broken glass in wooden/steel frame complete all as specified and directed |
| 17 | S&F in repair galvanised mild steel wire cloth nominal dia of wire 0.56mm and average width of aperture 1.00mm in wooden/steel frame complete all as specified and directed |
| 18 | S&F in repair steel window handles left/right, and peg stay including welding to base plate, pin and handle/brackets complete all as specified. |
| 19 | S&F in repair 30mm width continous (piano) hinges mild steel, bright finish or electrogalvanised with width of flap 30mm complete all as specified. |
| 20 | S&F in repairs 125 mm Hasp and staple, safety type, aluminium anodised hinge pin including bolt to hinge plate and fixed with screws complete all as specified. |
| 21 | S&F in repair rubber door seal 32mm wide and 900 mm long with Aluminium strip of size 19mm wide fixed with machine steel screw with washer, complete all as specified and directed. |
| 22 | S&F in repair 25mm dia drapery curtain rod with decorative end knobs complete with brackets and fixed to walls complete all as specified and directed. |
| 23 | Taking down chowkats or frames with shutters (with out taking off shutters from the frame) not exceeding 1.50 Sqm each complete all as specified and directed. |
| 24 | S&F powder coated anodised aluminium frame for doors, window, ventilators and partition wall with with one or more rebate including joiing cleat for fixing etc, making good all the disturbed surface of floor/wall to mathing the adjoining complete all as specified and directed. |
| 25 | S&F powder coated anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.). hinges type B-21 100mm long (2 No.) suitable handle (1 No.) & tower bolt 02 nos each shutter, making good all the disturbed surface of floor/wall to mathing the adjoining complete all as specified and directed. |
| 26 | S&F powder coated anodised aluminium ventilators with 4mm thick frosted glass louvers and incl 0.36mm dia and 1.18mm aperture stainless steel jally (Fixed outside of ventilator) complete all as specified and directed. |
| 27 | S&F anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and directed. |
| 28 | S&F galvanised stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed. |
| 29 | S&F 4.8mm thick sheet glass n. exc. 0.5 sqm in each pane complete all as specified and directed. |
| 30 | S&F medium grade steel water tubing, 15mm bore galvanised with all fittings such as Union, socket, elbow, nipple tank nipple with tank fittings etc. fixed complete to walls or laid in floors including taking up or down steel water tubing and connections including cleaning for refixing or removal to store for bore of pipe 15mm bore dia all as specified and directed. |
| 31 | S&F in repair medium grade steel water tubing, 20 mm bore galvanised with all fittings such as Union, socket, elbow, nipple tank nipple with tank fittings etc. fixed complete to walls or laid in floors including taking up or down steel water tubing and connections including cleaning for refixing or removal to store for bore of pipe 20mm bore dia all as specified and directed. |
| 32 | S&F in repair only GI fittings without GI pipe such as; union, socket, Tee, elbow, nipple, plug, tank nipple, reducer of size 6\\" & 4\\" long, all fittings for 15 mm bore pipe complete all as specified and directed. |
| 33 | S&F in repair only GI fittings without GI pipe such as; union, socket, Tee, elbow, nipple, plug, tank nipple, reducer of size 6\\" & 4\\" long, all fittings for 20 mm bore pipe complete all as specified and directed. |
| 34 | Repair of leakage of Small fittings galvanized iron medium grade such as socket, elbow, nipple, for 15mm bore pipe complete all as specified. |
| 35 | Repair of leakage of Small fittings galvanized iron medium grade such as socket, elbow, nipple, for 20mm bore pipe complete all as specified. |
| 36 | S&F in repair 15mm GI Union medium grade suitable for 15mm bore pipe complete all as specified |
| 37 | S&F in repair 15mm GI Tee medium grade suitable for 15mm bore pipe complete all as specified |
| 38 | S&F in repair 20mm GI Union medium grade suitable for 20mm bore pipe complete all as specified |
| 39 | S&F in repair 20mm GI Tee medium grade suitable for 20mm bore pipe complete all as specified |
| 40 | Removal of air lock, blocking in water pipes/bib taps/stop valve incl cleaning pipes as requried and as directed to ensure proper flow of water complete all as specified. |
| 41 | Cutting chases, pinning in, making good to facing where reqd and pointing in CM 1:3 to ends of edges of landing etc and cutting chases for concealed water tubing and making good cutting exc 10 cm but n.exc 20 cm girth. |
| 42 | S&F in repair 15mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (min wt 210 gm) complete all as specified |
| 43 | S&F in repair 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (min wt 210 gm) complete all as specified |
| 44 | S&F in repair waste coupling suitable for existing WHB/Sink complete all as specified and directed. |
| 45 | S&F in repair waste pipe suitable for existing WHB/Sink/Urinal etc. complete all as specified and directed. |
| 46 | Petty repair to stop leaking of PTMT Bib tap/ Pillar tap/Stop cock by suitable jumper washer and etc, complete all as specified |
| 47 | Petty repair to stop leaking of CP Brass Bib tap/ Pillar tap/Stop cock/ by suitable spindle and etc, complete all as specified |
| 48 | S&F in repair for 15mm bib taps of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90 gms) |
| 49 | S&F in repair for 15mm bib taps cast copper alloy chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule 15mm bore, complete all as specified and directed. |
| 50 | S&F in repair 15mm pillar tap, cast copper alloy, with capstan heads, chromium plated screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed |
| 51 | S&F in repair 15mm angle valve, fancy type chromium plated, screwed down, high pressure with crutch or butter fly handle screwed at two right angles ends for both iron pipe complete all as specified |
| 52 | S&F in repair 15mm stop/gate valve, cast copper alloy chromium plated fancy type with long shank & cup (concealed type) with capstan heads, screwed down, high pressure, with crutch or butterfly handle screwed for 15mm bore iron fixed complete |
| 53 | S&F in repair 15mm Brass CP mixer for mixing hot & cold water screwed down for iron pipe (Two in one wall mixer/ central hole basin mixer / sink mixer with swinging spout) and fixed complete all as specified and directed. |
| 54 | S&F in repair PVC connection, 600mm long, 15mm in size with PTMT nust and PVC washers at both ends complete all as specified |
| 55 | S&F in repair brass chromium plated shower rose of 125mm size, with or without swivel joints including fixing to GI pipe complete all as specified |
| 56 | S&F in repair soap dish stainless steel chromium plated fixed with brass screws and plug complete all as specified . |
| 57 | S&F in repair for 600 mm X450 mm looking mirror of any size 5.5mm thick with aluminium frame selected quality mounted on 6mm thick commercial ply wood and fixed to wooden plugs with chromium plated brass screw and cup washer complete all as specified |
| 58 | S&F in repair CP grating 125mm dia circular of approved make and fixing with cement mortar 1:3 on Nahani Trap or floor trap complete all as specified. |
| 59 | S&F in repair grating doom 125mm dia with waste hole of steel fixed on floor/nahani trap with cement mortar, complete all as specified. |
| 60 | S&F in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long, complete all as specified. |
| 61 | S&F in repair corner sheet glass shelf assembly consisting of 5.5 mm thick sheet glass with chromium plated bracket guard and railing complete all as specified. |
| 62 | S&F in repair shelf of PTMT fixed with and including chromium plated brass screws and wooden/ plastic cleats (Minimum weight 300 gms) complete all as specified. |
| 63 | S&F in repair corner shelf of PTMT fixed with and including chromium plated brass screws and wooden/ plastic cleats (Minimum weight 300 gms) complete all as specified. |
| 64 | S&F in repair Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed. |
| 65 | S&F in repair stainless steel tubular towel rail 20mm dia, D type, 60cm long between flanges complete all as specified |
| 66 | S&F in repair for CP towel ring of standard quality complete all as specified and directed. |
| 67 | Petty repair to leaking flushing cistern low/high level, incl adjustment in the internal fitting repair to PVC bends pipe, flush pipe etc all as per directed by Engineer-in-Charge |
| 68 | S&F in repairs PVC flush pipe of 32mm dia with two Nos check nuts for connecting low level flushing cistern to EWC complete all as specified. |
| 69 | S&F in repairs flush handle with adjustable lever and hook for low level flushing cistern complete all as specified. |
| 70 | S&F in repair PVC white low level flushing cistem 10ltrs capacity with all fittings syphonic action push stype with inlet ball valve and float incl PVC flush pipe, ball valve, handle, MS bracket etc complete all as specified. |
| 71 | S&F in repair, viterous china squatting pan of pattern long pan, size 580x440mm, white with intergral footrest including 'P' or 'S' trap front and back inlet any pattern including provision of lime concrete bedding complete all as specified. |
| 72 | S&F in repair, Vitreous china wash down water closet pan white (excl fixing bolts, flushing cistern and flush pipe) but including plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel CP or aluminised hinging device complete all as specified and directed by Engr-in Charge. |
| 73 | Taking down existing IWC/EWC along with its cement concrete beadding and P or S trap and S&F one/single piece Vitreous china water closest white colour of size 750 x 665 x 360 mm including an inbuilt syphonic action type flusing cistern 10 liter capacity with seat cover and PVC pipe upto finish floor level to connect flush pipe, making good all the disturbed surface of floor to matcing the adjoining complete all as specified and directed. |
| 74 | S&F in repair vitreous china ware wash hand basin with pedestal, white flat back size 550mm x 400mm excl taps, waste chain and plug and porecelain stopper but incl bracket and cutting for and pinning in ends of brackets or erecting stand.complete all as specified. |
| 75 | S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm (including waste pipe and waste coupling) complete all as specified and directed. |
| 76 | S&F in repair stainless steel plate rack of size of 900 mm x 775 mm x 250 mm made out of 1 mm thick stainless steel of first quality complete all as specified and directed. |
| 77 | S&F in repairs, self cleaning water jet, chromium plated, Fancey Type high qualitey (Health Faucet) 15mm bore ABC Body mild steel CP with 1.25 mtr ong flexible tube and ABS wall hook including making connections and fixied complete all as specified and directed. |
| 78 | Cleaning of water tank of any description and any capacity, washing complete with soap solution and removing vegetation around the water tank/plate form including opening and reconnecting with GI tubing as site requirement complete all as directed by Engineer-in-Charge |
| 79 | S&F in repairs PVC tank cover/lid of any decription (simple/threaded) for 500/1000 ltr over head tank complete all as specified. |
| 80 | S&F fpr rotational moulded High Density Poly-Ethylene water storage tanks of capacity 500 litre and conforming to IS, hoisted and fixed with tank nipple in position as specified, including dismantling of water tanks capacity exc 250 ltrs but n.exc 500 ltrs and removing from the site or to store complete all as specified and directed. |
| 81 | S&F for rotational moulded High Density Poly-Ethylene water storage tanks of capacity 1000 litre and conforming to IS, hoisted and fixed in position and Includiing dismantling of water tanks capacity 1000 ltrs and removing from the site or to store complete all as specified and directed. |
| 82 | M&L for Mat finish, premium quality, joint free (edge cut), coloured/ printed Non -Skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile not exceeding 0.38 sqm, as in floors etc. set and jointed in neat cement slurry over 15mm thick bedding layer in cement mortar (1:6) including necessary cutting and waste as per site requirement pointed in white or coloured cement to match, including dismentling floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed. |
| 83 | M&L for Vitrified Ceramic tiles 8 to10 mm thick (square/rectangular), light shade, polished, area of each tiles exc 0.36 sqm, in floors over 15mm thick screed bed or bedding layer of CM (1:6) etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. including dismentling floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed. |
| 84 | M&L for Glazed ceramic coloured tiles of size 450mm x 350 mm x 7 mm thick as in vertical surfaces, set and jointed in neat cement slurry and pointed with white or coloured cement to match the shade of tile over 10 mm thick cement screed in cement mortar 1:3 including dismentling floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed. |
| 85 | M&L for granite (of any type) work (table rubbed and polished) 20mm thick in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismentling of existing granite including cement mortar bedding complete all as specified and directed. |
| 86 | M&L for cutting, rounding of edges and mirror polishing, of granite /marble/kota stone complete all as specified and directed. |
| 87 | Demolition of cement Concrete(unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) or as in sunken complete. |
| 88 | M&L PCC 1:3:6, type C-2, 75mm thick as in plinth protection, surface finished fair and smooth without using extra cement.complete all as specified. |
| 89 | M&L for 15mm thick rendering in cement mortar 1:6 on fair faces of brick work surace rendering is to be even and smooth with out using extra cement including taking down cement plaster including raking out joints hacking for key srcubbing down with water all as specified and directed. |
| 90 | M&L for 15mm thick rendering in cement mortar 1:4 on fair faces of brick work surace rendering is to be even and fair with out using extra cement including taking down cement plaster including raking out joints hacking for key srcubbing down with water all as specified and directed. |
| 91 | M&L for 5 mm thick cement plaster in cement mortar 1:3 on celling surfaces finished even and smooth without using extra cement including taking down cement plaster including raking out joints hacking for key srcubbing down with water all as specified and directed. |
| 92 | M&L for preparation new surface of wall and applying two coat of oil emulsion distemper over a coat of 3mm thick wall putty complete all as specified and directed. |
| 93 | M&L for preparation of new plastered surface of external wall and chajjas and making the surface smooth with sand paper and priming the surface with alkali resistance primer paint for external surface, applying two coat of cement base paint including curing complete all as specified & directed. |
| 94 | M&L for three coats of white wash on newly plastered surfaces of ceiling including prepration of new surfaces complete all as specified and directed. |
| 95 | M&L for preparation of old painted wood or wooden based surfaces by rubbing with abrasive paper etc of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed. |
| 96 | M&L for preparation of old painted steel and iron surfaces by rubbing with abrasive paper etc of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed. |
| 97 | Note - Rate quated above all items inclusive provision as under :Making arrangement for establishment of centralized complaint centre in the existing building as under :- (a) Infrastructure required in Complaint cell i.e. telephone, furniture, stationary, transport and other necessary items/materials to establish a new complaint centre able to receive and manage complaints from the users by all means ie Manual complaint mechanism, Telephonic complaints mechanism, SMS complaint Mechanism and e-mail complaint mechanism and to maintain a consolidated list of complaints and its redressal mode indicating all its relevant data. (b) Computer data operator shall be able to manage all the necessary activities and having qualification as10+02 or Equivivalent in any discipline with minimum 6 month certificate course of computer applications (from a Govt recognized institute), (c ) Provision and maintenance of all tools, plants, equipment and safely gear required for tradesmen under this contract |
| 98 | (d) Provision of communication facilities to supervisor and tradesmen. (e) Monitoring and management of complaints report from generation to execution of complaint including pending complaints. (f) Updating status of lodged complaints before change of eight hour shift. (g) Provision of motorized conveyance for deployment to all tradesmen under this contract. (h) Basic inputs to be noted from the complainants will be locality, Building No, Qtr No, Name and Rank of complaint and exact nature of complaint and mobile No/ telephone (j) On lodging the complaint, the Complaint No will be assigned for reference . Also system should indicate an approximate time for repairs. Accordingly a corresponding complaint slip shall be generated by the system with all relevant info. Complaint slip should be printed in triplicate and to be handed over immediately to Supervisor who shall detail appropriate tradesmen for repair with required materials/store. One copy of complaint shall be retained in complaint centre and two copies with tradesmen. |
| 99 | (k) On both copies of complaint slip, status of the complaint attended shall be endorsed by the complaint/user. One copy to be retained by the complainant and second copy to be with tradesmen for handing over in the complaint centre. Reasons for non attending of complaint etc shall be recorded alongwith estimate of expected time to attend and rectifying the complaint. (l) At the end of each day, summary of complaints shall be prepared and generated indicating No of complaints lodged, attended in time, Reasons for not attending , probable time required for attending the pending complaints etc |
| 100 | (m) JE in charge of MES will review the complaints recorded in the system daily and will carry out personal inspection of complaints attended and its status and will take remedial measures in this regard. (n) Note : Contractor shall be responsible for followings :- (i) Installation of landline telephone connection with internet broadband facility, obtaining SIM cards for mobile phones for supervisor and workers, deployed by the contractor. (ii) Payment of telephone bills, internet charges, mobile bills, expenses etc shall be borne by the contractor and no claim whatsoever on this account will be admissible by the department. (iii) A Computer/PC System with internet Connection for the Complaints lodging and Supervising will be Provided by the Contractor and will not be paid Seperately. (iv) Space for complaint cell/Office & Store will be Provided by the Department. And for any Security Breach/Theft Activity department will not be responsible. Contractor Have to arranged All Security Things By Self. |
| 101 | S & F in repair/ repalcement modular switch single pole one way, 6 Amp (ISI marked), including taking down of old unsv modular switch complete all as specified and directed by Engineer-in-Charge |
| 102 | S & F in repair/ repalcement modular switch single pole two way, 6 Amp (ISI marked) including taking down of old unsv modular switch 2 way complete all as specified and directed by Engineer-in-Charge |
| 103 | S & F in repair/ repalcement modular bell push 1 module type 6Amp (ISI marked) including taking down of old unsv modular bell push complete all as specified and directed Engineer-in-Charge. |
| 104 | S & F in repair/ replacement modular socket outlet 16 Amp & 5 Amp, 2-in-1, controlled by one switch (ISI marked) including taking down of old unsv modular socket 16 Amps complete all as specified and directed by Engineer-in-Charge. |
| 105 | S & F in repair/ repalcement modular socket 2 in 1, 3 pin, 6 Amp flush type (ISI marked) including taking down of old unsv modular socket 6 Amps complete all as specified and directed by Engineer-in-Charge. |
| 106 | S & F in repair/ repalcement switch modular single pole one way,16 Amp (ISI marked) including taking down of old unsv modular switch 16 Amps complete all as specified and directed by Engineer-in-Charge |
| 107 | S&F ceiling rose PVC/polycarbonate, isolated body surface Bakelite 65mm dia three terminals including taking down of old unsv ceiling rose complete all as specified and directed. |
| 108 | S & F ding dong door bell electric suitable for AC 230 volt, single pole including taking down of old unsv door bell any type complete all as specified and directed by Engineer-in-Charge. |
| 109 | Supply and fix in repair/replacement of modular white cover plate with frame, 3 module including taking down existing plate complete all as specified and directed. |
| 110 | Supply and fix in repair/replacement of modular white cover plate with frame, 4 module including taking down existing plate complete all as specified and directed. |
| 111 | Supply and fix in repair/replacement of modular white cover plate with frame, 6 module including taking down existing plate complete all as specified and directed. |
| 112 | Supply & fix in repair/ replacement of switch piano, flush button, single pole one way 6 Amps including taking down of old unsv switch any type complete all as specified and directed. |
| 113 | Supply & fix in repair/ replacement of socket outlet 3 pin, 6 amps flush type including taking down old unsv socket 6 amps complete all as specified and directed. |
| 114 | S & F in repair/replacement of socket outlet 16 Amp & 5 Amp, 2-in-1, controlled by one switch (ISI marked) including taking down old unsv socket 16 amps complete all as specified and directed by Engineer-in-Charge. |
| 115 | Supply & fix in repair/repalcement of switch piano, flush button, single pole one way 16 Amps including taking down old unsv switch 16 amps complete all as specified and directed by Engineer-in-Charge. |
| 116 | Supply and fix in repair/replacement switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal, including taking down old unsv switch socket combination 16 amps complete all as specified and directed. |
| 117 | Supply & fix in repair/replacement of bell switch 5 Amps single pole one ways including taking down old unsv bell switch complete all as specified and directed. |
| 118 | Supply and fix in repair/replacement of LED batten fitting 20w with engineering plastic housing mounted on wall/surface connecting with all required accessories like square box for mounting on wall, flexible cable from ceiling rose etc, including taking down existing light any type as directed and specified by engr-in-charge. |
| 119 | S & F in repair/replacement of LED light fitting 9W/10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete including taking down existing light any type all as specified and directed. |
| 120 | Supply and fix in repair/replacement of LED batten fitting 10w with engineering plastic housing mounted on wall/surface connecting with all required accessories like square box for mounting on wall, flexible cable from ceiling rose etc, including taking down existing light any type as directed and specified by engr-in-charge. |
| 121 | Supply and fix in repair/replacement of LED batten fitting 5w study light with engineering plastic housing mounted on wall/surface connecting with all required accessories like square box for mounting on wall, flexible cable from ceiling rose etc, including taking down existing light any type as directed and specified by engr-in-charge. |
| 122 | S & F LED Bulb 12 Watt rechargeable emergency inverter LED bulb, cool day light, white upto 4 hours backup and auto cut-off after full charge complete including taking down existing bulb all as specified and as directed. |
| 123 | Supply and fix in replacement of old unserviciable Sheet metal enclousre for DBs double door single pole and neutral with 200 amps rated bus bar of 8- way, 240 volts, including taking down existing MCB DB complete all as specified and directed. |
| 124 | Supply and fixing in replacement of old MCB Triple pole and nuetral 63 Amps, 240 volts, 50 Hz, including taking out old u/s MCB complete all as specified and directed. |
| 125 | Supply and fixing in repair/replacement of MCB single pole and nuetral 6 to 32 Amps, 240 volts including taking down existing burnt MCB complete all as specified and directed. |
| 126 | Supply and fixing in replacement of MCB single pole and nuetral 40 to 63 Amps, 240 volts including taking down existing burnt MCB complete all as specified and directed. |
| 127 | Supply and fixing in repair /replacement MCB single pole 6 to 32Amps, 240 volts, including taking down existing burnt MCB all as specified and directed. |
| 128 | Supply and fix in repair/replacement of Decorative wall light fitting fixture with LED BULB 1x 09/10 Watt complete including taking down existing light all as specified and directed. |
| 129 | Supply and fixing in repair/replacement of LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC, White recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and direcred. |
| 130 | Supply and fix in repair/ replacement of LED Bldg Security light 35 Watt, New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having Bottom Opening seperate driver compartment with IP66 protection and impact resistance of IK08. connecting with PVC insulated three core flexible copper conductor of suitable size from ceiling rose to fitting including suitable size connector, complete all as specified and directed. |
| 131 | S & F in repair/replacement of single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps, complete all as specified and directed. |
| 132 | Deduct Credit Amount as per Schedule of credit as details given on Srl Page No 28 & 29 of tender doucments. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 08, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 08, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jul 15, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 4 daysJul 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysJul 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender