Tender For Online Complaint Management Under Age(I) Dalhousie Cantt.
Tender Value
18.49 Lakhs
Estimated cost
Bid Submission
08 Jul 2026
1 days left
EMD
36980
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dalhousie → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Online Complaint Management Under Age(I) Dalhousie Cantt.
BOQ
| Sl. No. | Item Description |
| 1 | Easing of window shutters/CB (One unit shall comprise of one complete window/CB/Showcase irrespective of number of leaves) to ensure smooth closing/opening including tightening of hinges, adjustement of tower bolts, sliding bolt and handles etc complete all as specified. |
| 2 | All as per Srl Item No 1 here-in-before but door shutters (Panelled, Skeleton and PVC doors). |
| 3 | Petty repair to PVC/Panelled/skeleton door shutters by making minor adjustment to hinges etc easing shutter incl taking down of shutter if required and refixing in same position including welding to angle iron chowkhats. |
| 4 | Welding in repairs not exceeding 2.5 cm in length & thickness of metal to be welded not exceeding 6 mm complete all as specified including material & labour. |
| 5 | S&F in repair Aluminum, anodized, barrel tower bolt of extruded section 100 mm long, complete all as specified. |
| 6 | S&F in repair Aluminium anodised barrel tower bolt of extruded section 150 mm long, complete all as specified |
| 7 | S&F in repair aluminium anodised barrel tower bolt of extruded section 200 mm long, complete all as specified |
| 8 | S&F in repair 125mm extruded aluminum alloy handle, fabricated type, anodized complete all as specified. |
| 9 | S&F in repair 150mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified |
| 10 | S&F in repair 75mm MS butt hinges medium weight, cold rolled fixed with screws or welded on wooden or steel frame with or without taking off shutter complete all as specified. |
| 11 | S&F in repair 100mm MS butt hinges medium weight cold rolled fixed with screws or welded on wooden or steel frame with or without taking off shutter complete all as specified. |
| 12 | S&F in repair 250mm long Aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified. |
| 13 | S&F in repair 300mm MS ordinary rat tail rod pattern springs incl roller and roller plate complete (Helical door spring) fixed with screws on wooden or welded on steel frame complete all as specified. |
| 14 | S&F in repair aluminum floor door stopper of size 75 mm with two rubber legs all as specified and directed |
| 15 | S&F in repairs 125 mm Hasp and staple, safety type, aluminium anodised hinge pin including bolt to hinge plate and fixed with screws |
| 16 | S&F in repair 30mm width continous (piano) hinges mild steel, bright finish or electrogalvanised with width of flap 30mm complete all as specified. |
| 17 | S&F in repair rubber door seal 32mm wide and (900 to1100mm) long with Aluminium strip of size 19mm wide fixed with machine steel screw with washer, complete all as specified and directed. |
| 18 | Taking down chowkats or frames with shutters (w/o taking of shutters from the frame) n.exc 1.5 Sqm each complete all as specified and directed. |
| 19 | Taking down chowkats or frames with shutters (w/o taking of shutters from the frame) exc 1.5 but n exc n.exc 4 Sqm each complete all as specified and as directed. |
| 20 | Taking down shutters of any description but exc. 1 Sqm and n exc. 2 Sqm each complete all as specified and as directed. |
| 21 | S&F for pressed steel frames size 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate including 25x3 Flat iron 230 mm long hold fast and fixing in PCC making good surface., etc., complete all as specified |
| 22 | S&F for pressed steel frames size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,ncluding 25x3 Flat iron 230 mm long hold fast and fixing in PCC making good surface etc., complete all as specified |
| 23 | M&L for PCC 1:3:6, Type C0 (Using 12.5 graded aggregate) for filling in pressed steel frame./holdfast of any size |
| 24 | M & L for 2nd class hard wood as in Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed with fasteners or holdfasts all as specified and directed by engr-in-charge. |
| 25 | S&F 35 mm thick 2nd class hard wood rail and style plain framed,factory made panelled shutter (one panel) without interlocking rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (part I), kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 26 | S&F 35 mm thick 2nd class hard wood glazed and skeleton shutter open rebated and prepared to receive glass gauze etc (without shas bar) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of shutter as specified in SSR Pt I Section 8, clause 8.24 (a) complete all as specified and as directed. |
| 27 | S&F PVC solid factory made door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS Square tube, supplying & fixing in opening, as per specification and drawing complete all as specified and directed. |
| 28 | S&F Factory made solid panel PVC door shutter 24 to 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded both side prelam PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both side prelam PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of both side prelam PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement as per specification & drawing complete all as specified and directed. |
| 29 | S&F powder coated anodised aluminium frame for doors, window, ventilators and partition wall with with one or more rebate including joiing cleat for fixing etc, making good all the disturbed surface of floor/wall to mathing the adjoining complete all as specified and directed by Engr-in Charge. |
| 30 | S&F powder coated anodised aluminium door shutter, aluminium section wt 0.55 kg / mtr including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos. in each door , hinges , anodised aluminium snap beading screws etc complete all as specified and directed by Engr-in Charge. |
| 31 | S&F 4.8mm thick sheet glass square in each pane complete all as specified and directed by Engr-in Charge. |
| 32 | S&F for Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with finned tacks of galvanised wire staple fixed with stainless steel wire staples, complete all as specified. |
| 33 | S&F for in repair Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with finned tacks of galvanised wire staple fixed with stainless steel wire staples, complete all as specified. |
| 34 | M&L for Applying two coats of synthetic enamel paint over a coat of pink primer on new wood or wood based surfaces of any description, exc. 10cm width or girth including preparation of surfaces, all as specified. |
| 35 | S&F for 100 mm size butt hinges medium weught , cold rolled MS and fixed. |
| 36 | S&F for 150 mm size Handles extruded aluminium alloy handles,fabricated type anodised |
| 37 | S&F for 100mm size aluminium anodised, barrel tower bolts, of extruded section and fixed. |
| 38 | S&F for Aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt 250 mm long, all as specified and directed. |
| 39 | S&F for Mild steel, 300mm, ordinary rat tail, rod pattern springs including roller and roller plate complete fixed to chowkhats, all as specified. |
| 40 | S&F 18/19mm thick Prelaminated particle board, interior grade, prelaminated both side decorative choice lamination, fixed with screws to timber frame work and wall |
| 41 | S&F hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws, Size of hasp and staple in mm 100 complete all as specified and directed. |
| 42 | S&F for Extra over rates of block board or veneered particle board for 18/19 thick external teak wood lipping, 3-4mm thick fixed with nails complete all as specified and directed. |
| 43 | S&F for Continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flap (when open) 40mm, complete all as specified and directed. |
| 44 | S&F magnetic catcher and striking plate including letting in and fixed complete all as specified and directed. |
| 45 | S & F as in repair 25mm dia Harrison rails/curtain rod, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified. |
| 46 | S & F in repair door closer Aluminium die cast body Hydraulically regulated designation No.3 universal type suitable for door shutters of 851 to 1000 mm in width and weight between 61 to 80 kg complete all as specified and as dierected. |
| 47 | M&L for Mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed ballusters walk ways; railings; flat iron for framing grills, framework of water tanks and similar work conforming to Fe.290. Gde-E-165, complete all as specified and directed. |
| 48 | M&L preparation or new steel and iron surfaces of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 49 | S&F for 3mm thick sheet glass, ordinary quality and glazing with oil putty/ wooden beads in square pane not exc 0.50 Sqm each pane in wooden/ Steel windows complete all as specified and directed. |
| 50 | S&F for 3mm thick sheet glass, ordinary quality and glazing with oil putty/ wooden beads in square pane exc 0.50 Sqm each pane in wooden/ Steel windows complete all as specified and directed. |
| 51 | S&F for 3mm thick figured glass, pin head type and glazing with oil putty/ wooden beads in square pane not exc 0.50 Sqm each pane in wooden/ Steel windows complete all as specified and directed. |
| 52 | S&F for 2mm thick Fibre glass reinforced translucent corrugated/Plain sheeting with two corrugations side lap/Plane fixed with coach screw and washer in roof, wall/window Glass etc complete all as specified and directed. |
| 53 | Taking up or down old 15 mm bore steel tubing fixed to wall and ceiling or laid in floor,with all fittings and fixtures and short lengths including cleaning for refixing, removal to store,complete all as specifed and directed . |
| 54 | Taking up or down old 20mm bore steel tubing fixed to wall and ceiling or laid in floor,with all fittings and fixtures and short lengths including cleaning for refixing or removal to store, complete all as specified and directed. . |
| 55 | Taking up or down old 25 to 32 mm bore steel tubing fixed to wall and ceiling or laid in floor,with all fittings and fixtures and short lengths including cleaning for refixing or removal to store,complete all as specifed and directed . |
| 56 | S&F for steel tubes, 15 mm bore, galvanised, \\" medium grade\\" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor,complete all as specified and directed. |
| 57 | All as per item No.56, above but except GI tubing, complete all as specified and directed. |
| 58 | S&F for steel tubes, 20 mm bore, galvanised, \\" medium grade\\" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor, complete all as specified and directed. |
| 59 | All as per item No.58, above but except GI tubing, complete all as specified and directed. |
| 60 | S&F for steel tubes, 32 mm bore, galvanised, \\" medium grade\\" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor, complete all as specified and directed. |
| 61 | S&F in repair only GI fittings without GI pipe such as; union, socket, Tee, elbow, nipple, plug, tank nipple, reducer of size 6\\" & 4\\" long, all fittings for 15 mm bore pipe complete all as specified and directed. |
| 62 | S&F in repair only GI fittings without GI pipe such as; union, socket, Tee, elbow, nipple, plug, tank nipple, reducer of size 6\\" & 4\\" long, all fittings for 20 mm bore pipe complete all as specified and directed. |
| 63 | Repair of leakage of Small fittings galvanized iron medium grade such as socket, elbow, nipple, for 15mm bore pipe complete all as specified and directed. |
| 64 | Repair of leakage of Small fittings galvanized iron medium grade such as socket, elbow, nipple, for 20mm bore pipe complete all as specified and directed. |
| 65 | S&F in repair 15mm GI Union medium grade suitable for 15mm bore pipe complete all as specified and directed. |
| 66 | S&F in repair 15mm GI Tee medium grade suitable for 15mm bore pipe complete all as specified and directed. |
| 67 | S&F in repair 20mm GI Union medium grade suitable for 20mm bore pipe complete all as specified and directed. |
| 68 | S&F in repair 20mm GI Tee medium grade suitable for 20mm bore pipe complete all as specified and directed. |
| 69 | Removal of air lock, blocking in water pipes/bib taps/stop valve incl cleaning pipes as requried and as directed to ensure proper flow of water complete all as specified and directed. |
| 70 | Cutting chases, pinning in, making good to facing where reqd and pointing in CM 1:3 to ends of edges of landing etc and cutting chases for concealed water tubing and making good cutting exc 10 cm but n.exc 20 cm girth.complete all as specified and directed. |
| 71 | S&F for Rotational moulded polyethylene water storage tank 500 Ltrs capacity four layered (ISI Marked) cylinderical vertical with closed top, hoisted and fixed in position with ball brass valve, high pressure with Brass PVC float valve 20mm dia with polythene float and fly nut, tank nipples with check nuts and washers complete and making connections with existing water supply line and incl dismantling water tank of capacity exceeding 250 litres but not exceeding 500 litres and removing to stores,complete all as specified and directed. |
| 72 | S&F for Rotational moulded polyethylene water storage tank 1000 Ltrs capacity four layered (ISI Marked) cylinderical vertical with closed top, hoisted and fixed in position with ball brass valve, high pressure with Brass PVC float valve 20mm dia with polythene float and fly nut, tank nipples with check nuts and washers complete and making connections with existing water supply line and incl dismantling water tank of capacity exceeding 500 litres but not exceeding 1000 litres and removing to stores, all as specified . |
| 73 | Cleaning of water tank of any description and any capacity, washing complete with soap solution and removing vegetation around the water tank/plateform including opening and reconnecting with GI tubing as site requirement complete all as directed by Engineer-in-Charge |
| 74 | S & F in repair Sintex water tank cover (Dhakkan) tied with wire for 500 and 1000 Ltr capacity water storage tank. |
| 75 | Dismantling PVC drain pipes, 75 to 110 mm dia, fixed to walls, laid in floors or in trenches or in any position including all fittings all as specified and directed. |
| 76 | S& F in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75mm dia outlet pipe in cement concrete type B-1 (1:2:4) , all as specified and directed. |
| 77 | S&F for PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors of bore 110 mm, in repairs complete all as specified and directed. |
| 78 | S&F for PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or floors of bore 75 mm, laid in repairs complete all as specified and directed. |
| 79 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls of bore 110 mm, in repairs complete,all as specified and directed. |
| 80 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls of bore 75 mm, in repairs complete, all as specified and directed. |
| 81 | S&F for PVC (SWR) junction single, (Single T) equal or unequal, 75mm bore provided with oval access door, fixed in repairs complete all as specified and directed. |
| 82 | S&F for PVC (SWR) bend any radius, 110mm bore, fixed in repairs complete all as specified. |
| 83 | S&F for PVC (SWR) branch piece, single (single Y) equal or unequal, 75mm bore, fixed in repairs complete all as specified. |
| 84 | S&F for PVC (SWR) bend any radius with or without access door, 75mm bore, fixed in repairs complete all as specified. |
| 85 | S&F for 75 mm PVC (SWR) vent cowl complete, all as specified. |
| 86 | S&F in repairs Cast iron soil, waste and vent pipes, sand cast, 100mm bore in any length with or without ears with cement joints, fixed to walls with all fittings including taking down unservicable pipe with fittings complete all as specified and directed. |
| 87 | S&F in repairs Cast iron soil, waste and vent pipes, sand cast, 75mm bore in any length with or without ears with cement joints, fixed to walls with all fittings including taking down unservicable pipe with fittings complete all as specified and directed. |
| 88 | S&F in repairs Cast iron branch piece single of 100mm bore or with parallel branches fixed complete all as specified and directed. |
| 89 | S&F in repair Cast iron branch piece single of 75mm bore or with parallel branches fixed all as specified and directed |
| 90 | S&F in repairs Cast iron Bends (any radius), diminishing pieces or tapers (larger bore measured) of 100mm bore fixed complete all as specified and directed. |
| 91 | S&F in repairs Cast iron Bends (any radius), diminishing pieces or tapers (larger bore measured) of 75mm bore fixed complete all as specified and directed. |
| 92 | S&F in repair Fancy type Bib taps, 15mm bore, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down high pressure, screwed for iron pipe or for brass ferrule fixed in repairs, all as specified. |
| 93 | S & F in repair 15mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed |
| 94 | S & F in repair 15mm dia Stop valves, cast copper alloy chromium plated fancy type , screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed |
| 95 | S&F in repair 15mm bore dia concealed type angle valve / stop valve (as per sample) cast copper alloy chromium plated fancy type with long shank and cup ISI marked with crutch or butter fly handles screwed down,screwed for iron pipe of 15 mm bore complete all as specified and directed. |
| 96 | S & F in repair 15mm dia Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm- 125gms). complete all as specified and directed. |
| 97 | S & F in repairs 15mm dia Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-110gms) complete all as specified and directed. |
| 98 | S & F in repairs 15mm dia Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/ 20mm-92gms) complete all as specified and directed. |
| 99 | S&F in repair 15mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed.(Minimum weight15mm-142gms/ 20mm-210gms./ 25mm-455gms/ 40mm- 690 gms) Complete all as specified. |
| 100 | S&F in repair 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed.(Minimum weight15mm-142gms/ 20mm-210gms./ 25mm-455gms/ 40mm- 690 gms) Complete all as specified. |
| 101 | S&F in repair 25mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed.(Minimum weight15mm-142gms/ 20mm-210gms./ 25mm-455gms/ 40mm- 690 gms) Complete all as specified. |
| 102 | S & F in repair Grating doom 100mm dia of PTMT with or without waste hole (Minimum weight 25gms)and fixing with cement mortar 1:3 on Nahani Trap or floor trap complete all as specified. |
| 103 | S&F for Chromium plated brass shower rose, fancy type, 125mm size with shower arm, chromium plated, 195mm long with bend of 45° with flange suitable for 15mm bore pipe with swivel joint fixed to pipe in repairs, complete all as specified. |
| 104 | S & F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 105 | S & F in Repairs of rubber washer for stop cock, bib tap, Pillar tap ,gate valve of any type all as specified and directed |
| 106 | S & F in Repairs brass spindle/disc suitable for CP piller Tap,CP bib tap,Angle Cock all as specified and directed |
| 107 | S& F in repair 32mm bore PVC waste down take pipe fixed in WHB/sink/urinals complete all as specifide and direted . |
| 108 | S & F in repair 32 to 40mm size Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm- 45gms/40mm-60 gms, complete all as specified. |
| 109 | S&F in repair Jet Spray (with 1.50 mtr tube) fixed to EWC and Angular Stop Cock complete all as specified and directed. |
| 110 | S&F in repair soap dish stainless steel chromium plated fixed with brass screws and plug complete all as specified . |
| 111 | S&F in repairs toilet paper holder with flat recessed type stainless steel complete all as specified and directed |
| 112 | S&F in repairs health faucet ((ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 meter long flexible tube and ABS wall 1.25 m long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and directed. |
| 113 | S&F in repair towel rail 450 mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 170 gms), complete all as specified. |
| 114 | S&F in repair for CP towel ring of standard quality complete all as specified and directed. |
| 115 | M&L in repair for 15mm Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed , with or without lettered 'Hot' or 'Cold' complete all as specified and directed. |
| 116 | M&L for of Brass CP suitable for centre hole basin mixer for mixing hot & cold water screwed down for 15mm bore dia of pipe & 450mm long iron pipe and fixed cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 117 | S&F in repair 15mm size gun metal globe or gate valves with iron wheel head, screwed both endsfor iron pipe and fixed complete all as specified and directed. |
| 118 | S&F in repair 20mm size gun metal globe or gate valves with iron wheel head, screwed both endsfor iron pipe and fixed complete all as specified and directed |
| 119 | S&F for Vitreous Chinaware squatting pan, ‘Orrisa pattern’ size 580 mm x 440 mm, snow white, with cast iron ‘P’ or ‘S’ trap, front or back inlet, integral foot rest with provision of plain cement concrete M-15, type B-I using 20 mm graded crushed stone aggregate complete all as specified, incl making connections to trap and to flush pipe including making good to floors to match existing, in repairs, all as specified. |
| 120 | Vitreous china wash down water closet pan pedestal pattern , white (excluding supply of flushing cistern and flush pipes, but including fixing thereof), including making connections to trap, and to flush pipe incl plastic seat and cover ( As directed ) with stainless steel or aluminised hinging device and fixed in repair complete all as specified and directed. |
| 121 | S&F in repair Viterous china urinals, half stall type, incl CP coupling, waste pipe and all necessary fittings, complete incl providing and fixing plugs , bedding urinal against wall in CM 1:2 , securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement all as specified and directed. |
| 122 | S&F in repair PVC flushing cistern 10 ltr capacity incl inlet and and outlet connections,brackets, PVC flush pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC all as specified and directed. |
| 123 | S&F in repair of flushing cistern kit,complete all as specified and directed by Engr-In-Charge. |
| 124 | S&F in repair plastic water closet seat cover, back closed pattern with flat bottom and mild steel chromium plated or aluminiumed hinging device complete all as specified and directed. |
| 125 | S&F in repairs PVC flush bend pipe of 32mm dia with two Nos check nuts for connecting low level flushing cistern to EWC complete all as specified. |
| 126 | Petty repair to leaking flushing cistern low/high level, incl adjustment in the internal fitting repair to PVC bends pipe, flush pipe etc all as per directed by Engineer-in-Charge |
| 127 | S&F in repairs flush handle with adjustable lever and hook for low level flushing cistern complete all as specified. |
| 128 | S&F in repair Vitreous china wash basin, white, corner or flat of size 550 X 400mm or any other size as directed by Engr-in-charge and excluding taps, waste, chain and plug and pocelain stopper but incl brackets, cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete fixed in repairs.complete all as specified and directed. |
| 129 | S& F in repair Sink with drain board made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 405mm x 355mm x 178 mm, complete all as specified and directed. |
| 130 | S&F for Sheet glass shelf assembly, 55 cms long consisting of 5.5 mm thick sheet glass shelf 12cms wide with chromium plated bracket guard (rectangular/ oval/ curved and railing 60 cms long, selected quality as approved by GE, fixed in repairs, all as specified and directed. |
| 131 | S&F in repair corner sheet glass shelf assembly consisting of 5.5 mm thick sheet glass with chromium plated bracket guard and railing complete all as specified. |
| 132 | S&F in repair shelf of PTMT fixed with and including chromium plated brass screws and wooden/ plastic cleats (Minimum weight 300 gms) complete all as specified. |
| 133 | S&F in repair corner shelf of PTMT fixed with and including chromium plated brass screws and wooden/ plastic cleats (Minimum weight 300 gms) complete all as specified. |
| 134 | S&F for 600mmx450mm bevelled edge looking mirror of selected quality with 4.5mm thick polished glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plug with CP brass screws and cup washers fixed in repairs, all as specified. |
| 135 | S&F in repair Steel plate rack made of stainless steel having thickness 1.00mm, fixed with plugs, washers and steel screws including bedding in cement mortar on to dwarf wall, overall size 600mm x 750mm, all as specified and directed. |
| 136 | Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete including removal of debris to a distance exc 1.5 km but n.exc 2 Km, all as specified and as directed. |
| 137 | M&L PCC 1:3:6, type C-2, 75mm thick as in plinth protection, surface finished fair and smooth without using extra cement. complete all as specified and directed. |
| 138 | M&L for PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate in foundations, filling and mass concrete complete all as specified and directed. |
| 139 | M&L for PCC 1:2:4 type B1using 20 mm graded stone aggregate as in coping and the like including weathering, slightly rounded or chamfered angle and throathing including necessary form work complete all as specified and directed by Engineer-in-Charge. |
| 140 | M&L cement concrete 1:3:6 type C1 (using 20mm graded crushed stone aggregate) as in surface channel and drains including necessary form work including complete all as specified and directed |
| 141 | Dismantling floor, hearth or wall tiling including cement mortar bedding (But not backing), removing and rubbish of the premisses, complete including removal of debris to a distance exc 1.5 Km but n exc 2 Km, Complete all as specified. |
| 142 | M&L for Non skid ceremic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15 mm thick screed bed in cement mortar 1:6, complete all as specified. |
| 143 | M&L for Non - skid Ceramic Coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm th screed bed in CM 1:6.complete all as specified. |
| 144 | M&L for Glazed ceramic coloured tiles 450 x 350 x 7 mm thick as in vertical surfaces such as skirting, dado etc set and jointed in neat cement slurry pointed in white or coloured cement to match over and includind 10 mm thick rendering in cement mortar 1:4 to receive tiles, complete all as specified. |
| 145 | Demolition of stone/boulders or brick masonary built in cment mortor including all quoins, arches, pillars, etc but excluding ashlar facings, dresses stone work and precast concrete articles etc, complete all as specified. |
| 146 | M&L for Brickwork with old size fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete. |
| 147 | Taking down cement plaster on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water, etc. complete including removal of debris to a distance exc 1.5 Km but n exc 2 Km, Complete all as specified. |
| 148 | M&L for Rendering 10 mm thick in on fair faces or other than fair faces of brick work, concrete sruface,stone masonary in cement mortar (1:6), finished even and smooth without using extra cement complete all as specified and directed by engr-in-charge.Note: Necessary additional dubbing if required will be done by contractor and nothing extra cost is admissible in this account.all as specified and directed. |
| 149 | M&L for Rendering 15 mm thick in two layers (10+5) on other than fair faces of brick work,stone masonary surface, concrete surface in cement mortar (1:4), finished even and fair without using extra cement complete all as specified and directed by engr-in-charge.Note: Necessary additional dubbing if required will be done by contractor and nothing extra cost is admissible in this account. |
| 150 | M&L for rendering 5mm thick on fair faces of concrete surfaces in cement mortar 1:3 on ceiling etc, finishing the surface and even and smooth without using extra Cement complete all as specified and directed by Engr-in Charge. |
| 151 | M&L for Preparation of new plastered or unplastered surfaces of walls with wall care putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and applying two coats of oil bound distemper complete all as specified and directed. |
| 152 | M&L preparation of old decorated plastered or unplastered surfaces of walls including cornices, pilasters, etc. by washing, rubbing, stopping, brooming down with steel wire brushing scrapping down smoke soots, moulds efflorescent salts and trading oil and greasy spots & providing one coat of oil bound distemper on walls complete all as specified & directed |
| 153 | Preparation of new plastered surfaces of walls and applying Finishing walls with Acrylic Smooth exterior paint of required shade (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm), complete all as specified and directed. |
| 154 | Preparation of old plastered or unplastered surfaces of walls including complete removal of existing treatment and applying Finishing walls with Acrylic Smooth exterior paint of required shade (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm), complete all as specified and directed. |
| 155 | M&L for Preparation of newly plastered surfaces and applying three coat of white wash on ceiling complete all as specified and directed. |
| 156 | M&L for Preparation of old or previously treated plastered or unplastered surfaces including complete removal of existing treatment and applying two coat of white wash on ceiling complete all as specified and directed. |
| 157 | M&L for preparation of old painted surfaces of wood exc 10cm width or girth and applying one coat of synthetic enamel paint |
| 158 | M&L for preparation of old painted surfaces of steel exc 10cm width or girth and applying one coat of synthetic enamel paint |
| 159 | Taking out carefully copper/aluminium point wiring,Light,fan,socket or power complete with all fitting, fixtures such as switch socket out let, ceiling rose ,holder ,regulator,DBs etc including making good the disturbed surface of wall/floors complete . Please Enable Macros to View BoQ information |
| 160 | Taking out carefully copper/aluminium point wiring,Light,fan,socket or power complete with all fitting, fixtures such as switch socket out let, ceiling rose ,holder ,regulator,DBs etc including making good the disturbed surface of wall/floors complete . Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayJul 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender