|
| 1 | Excavating in trenches for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, drains etc. n exc 1.5 m wide and n exc 1.5 m in depth and getting out in loose/ soft soil complete all as directed. |
| 2 | M &L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete |
| 3 | M&L for Brickwork with fly ash bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified. |
| 4 | Returning/filling trenches in soft/loose soil including spreading watering, well ramming in layers n.exc 25 cm thick after laying and testing of pipe complete all as specified & directed. |
| 5 | Removing excavation material surplus soil to a distance nexc 100m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified & directed. |
| 6 | M&L Use and waste for form work to side and soffits of floor or roof beams, lintel beam haunchings girders and bressummers etc for fair finished surfaces of concrete. |
| 7 | M&L RCC type A-1 (1:1.5:3) using 20 mm graded stone as in plinth beams, lintel, beams, cantilevers, bresummers, as like complete all as specified and directed. |
| 8 | M&L Use and waste for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for fair finished surfaces of concrete. |
| 9 | M&L reinforced cement concrete type A-1 (1:1.5:3) using 20 mm graded stone as in slab supported on walls, beams and columns in floor, roof, beams and shelves etc for soak well/septic tank in running and manhole cover slab with plain fair faces and set in CM 1:4 condition complete all specified |
| 10 | M&L for MS TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 11 | M&L for MS TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips. complete all as specified and as directed. |
| 12 | M&L for 15mm thick rendering in cement mortar (1:4) on other than fair faces of brick/ concrete surfaces finished the surface even and smooth without using extra cement, using 200 ml water proofing liquid per bag of 50 Kgs cement (but excluding the cost of water proofing liquid). |
| 13 | M&L for 10mm thick rendering in cement mortar (1:6) on fair faces of brick/ concrete surfaces finishing the surface even and smooth without using extra cement. |
| 14 | Supply only water proofing liquid Dr Fixit or equivalent as approved. |
| 15 | M&L for rendering 5 mm thick in CM 1:3 over 10 mm thick in CM 1:4 dubbing coat on ceiling surfaces of concrete finishing the surface even & smooth (without using extra cement) |
| 16 | M&L for two coats of cement base paint over a coat of alkali resistant primer on newly plastered surfaces of wall including preparation of new surfaces complete. |
| 17 | M&L for preparation of new plastered surface of wall and applying two coats of Oil Bound Distemper over and including one coat of alkali resistant primer on wall complete all as specified and directed. |
| 18 | M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed. |
| 19 | M&L100mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub base of floor complete all as specified and directed. |
| 20 | M&L for 18-20mm thick Machine cut Machine polished kota stone slab as in riser of steps, skirting, dado and pillar jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and incl 10mm thick plaster in cement mortar 1:3 complete. |
| 21 | M & L for Hardcore of broken stone gauge n. exc. 63mm deposited spread and levelled in layers n.exc. 15cm thick watered and rammed to a true surface. |
| 22 | M&L 75mm thick PCC ( 1:3:6 ) type C1 (using 20mm graded stone aggregate) laid in pannel ffinished even and fair as in plinth protection complete all as specified and directed.. |
| 23 | S&F Solid WPC (Wood Polymer Composit) single extruded Door Frame of size 90mm x 45mm single rebate suppling & fixing in opening as per specification & drawing complete all as specified and as directed. |
| 24 | S&F factory made Solid WPC (Wood Polymer Composit) single extruded Door Shutter 28 to 30mm thick comprising of virgin polymer of K value of 58-60 (suspension grade), calcium carbonate and natural fibers ( wood powder/ rice husk/ wheat husk) and non toxic additives ( maximum toxicity index of 12 for 100 gms) having minimum density of 900 N( Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to speed of flame of class A category with propery of being termite/ borer proof water/ moisture proof and fire retardant and fixing with stainless full body threaded star headed counter sunk S.S.screws, fixing in frame at site complete all as specified and as directed. |
| 25 | S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as directed by Engr-in-Charge. |
| 26 | S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete but without glazing bars, dovetailed or welded complete all as directed by Engr-in-Charge. |
| 27 | S& F fixed 4mm thick sheet glass ordinary quality nexc 0.50 Sqm each pane including necessary cleats, glazing clips rubber packing, anodised aluminium snap beading, screws in aluminium windows. |
| 28 | S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples. |
| 29 | S&F MS Framed work such as grills gratings , door and cooler stand, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars confirming to Fe.290.Gde-E-165 |
| 30 | M&L Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete. |
| 31 | S&F in repairs Floor door stopper of brass body, and tongue with hard drawn steel spring hard overall length of cover plate 140mm complete all as specified and as directed. |
| 32 | S&F in repairs stainless steel peg set of 8 hooks fixed with wall or wooden door complete all as specified and as directed. |
| 33 | S&F fancy type curtain rod 25 mm dia Stainless steel, chromium plated with fixing brackets, incl side brackets, complete complete all as specified. |
| 34 | S&F SS butt hinges 100mm long medium weight cold rolled complete all as specified. |
| 35 | Supply & fix 150 mm long aluminium handles fabricated type anodised all as specified. |
| 36 | Supply & Fix 150 mm long aluminium anodised barrel tower bolts of extruded section and fixed. |
| 37 | S&F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed. |
| 38 | S&F 15mm bore CP brass bib cock fancy type screwed for iron pipe or ferrule and fixed complete all as specified and directed |
| 39 | S&F 15mm bore CP brass angular stop cock screwed for iron pipe or ferrule and fixed complete all as specified and directed |
| 40 | S&F white coloured vitreous china, wash hand basin of size 550mm X 400mm flat back with pedestal Including bracket , CP waste coupling ,chain and plug, 2 Nos PVC connection 15 mm size & 45-60cm long & PVC Waste coupling & flexible waste pipe complete all as directed. |
| 41 | S&F 600mmx750mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers |
| 42 | S&FTubular towel rail 20mm dia brass chromium plated `D' type 60cm long with bracket and fixed complete all as directed |
| 43 | M&L PVC (SWR) Nahani/floor trap, with CP grating including joining to waste pipe fixed in cement concrete type B-1 (1:2:4) 75 mm dia complete all as specified. |
| 44 | S&F PVC (SWR) 110mm bore pipes single socketed in any length witlh rubber ring joints laid in trenclhes or in floors all as spd |
| 45 | S&F PVC (SWR) 75mm bore pipes single socketed in any length witlh rubber ring joints laid in trenclhes or in floors complete all as specified. |
| 46 | S&F PVC (SWR) bend 110mm dia radius complete all as specified. |
| 47 | S&F PVC (SWR) bends with access door of radius 75mm dia |
| 48 | S&F vitreous china squatting pan ‘Orissa pattern’ size 580x440mm white with integral foot rest including connection to 100mm bore 'P' or 'S' trap, and flushing pipe, anti-syphonage pipe, etc and including lime concrete bedding complete all as specified and directed. |
| 49 | S&F Vitreous china wash down water closet pedestral pan white, including 10 ltrs PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, flush pipe of polythylene of low or high density or PVC 32mm dia, plastic water closet seat, closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminium hanging device, complete all as specified and as directed. |
| 50 | S&F 10 ltrs PVC (White) valve less syphonic action type, flushing cistern low level with inlet ball valve float, handle, aluminium brackets for bottom support fixing with gitties embeded in wall with drilling machine etc complete. |
| 51 | M&L APP based polymeric membrane not less than 3 mm thick, weighing not less then 3.5 kg / Sqm, reinforeced with polyster non-woven fabric (weighing not less than 15 gm/sqm) . It shall be laid by torch application. Side overlaps shall be 75 mm and the ends shall be 100 mm and all overlaps and jointed shall also be sealed by torch application. For parapets, membrane shall be taken to a height of minimum 60cm and then inserted inside the parapet in a grooves.The same shall be finished by a membrane flashing over a coat of cold applied bituminous primer confiming to IS:3384. @ 0.40kg per Sqm complete all as specified and directed. |
| 52 | S&F PVC water storage tank cylinderical, verticle with closed top hoisted and fixed in position tank capacity 1000 Ltr with and including ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for 20mm bore for iron pipe & making connection for inlet and outlet complete all as specified & directed. |
| 53 | M&L for PCC 1:2:4 type B-2 (using 40mm graded stone agg) as in surface channel bed in manholes all as specified laid to slope and finished surface even and smooth complete all as specified & directed. |
| 54 | Brick work with old size sub class 'B bricks straight or curved on plan exc 6 metre mean radius built in cement mortar (1:6). |
| 55 | M & L 15mm thick rendering in CM ( 1 : 4 ) on fair faces of brick walls or concrete surfaces etc. and finished even & smooth without using extra cement complete all as specified. |
| 56 | M & L 15mm thick rendering in CM ( 1 : 4 ) on other than fair faces of brick walls or concrete surfaces etc. and finished even & smooth without using extra cement complete all as specified. |
| 57 | M&L for PCC 1:4:8 Type D-2 using 40mm graded crushed stone aggregate as in concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested all as specified and shown on drgs for 200mm dia complete all as specified & directed. |
| 58 | M&L for Reinforced concrete pipes, class NP 2 with one collar per length of pipe 200mm internal dia laid in trenches jointed im CM 1:1 and tested complete all as specified & directed. |
| 59 | M&L for PCC 1:2:4 type B-1 (using 20mm graded stone agg) as in coping benching bed blocks incl necessary form work complete all as specified & directed. |
| 60 | Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement incl forms moulds, mitered/stopped ends etc. complete all as specified & directed. |
| 61 | M&L for pre cast RCC cover slab for manholes Type B-1, 1:2:4 (using 20mm grade stone agg) set in cement mortar 1:6 complete all as specified & directed ( Reinforcement shall be measured & paid separately) |
| 62 | S&F Mild steel TMT bars 6 to 8mmdia cut to length bend to shape required including cranking bending spirally for hooping & binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed |
| 63 | Construction of soakage wells exc, in ordinary soil, fdn in PCC 1:3:6, wells of honey combed and solid in M-25, concrete, including intercepting chamber screen chamber brick work in CM, RCC cover slab in M-25/ RR Masonry/Filling with brick bats complete of size 3.0x4.5m |
| 64 | Demolition of brick work built in cement mortar including all quoins, asches, pillars etc in any position complete all as specified and as directed. |
| 65 | M&L for brick work in cement mortar 1:4 with fly ash bricks straight or curved on plan exc 6m mean radius with old size bricks complete all as specified & directed. (for manhole etc). |
| 66 | M & L 15mm thick rendering in CM ( 1 6 ) on other than fair faces of brick walls or concrete surfaces etc. and finished even & smooth without using extra cement complete all as specified. |
| 67 | M&L for PCC 1:2:4 type B-1 (using 20mm graded stone agg) as in coping benching bed blocks incl necessary form. work complete all as specified & directed. |
| 68 | M&L for PCC 1:2:4 type B-2 (using 40mm graded stone agg) as in surface channel bed/drains/in manholes all as specified laid to slope and finished surface even and smooth complete all as specified & directed. |
| 69 | Extra for forming fair finished drain or channel 60cm inner girth in cement concrete using extra cement incl forms moulds, mitered/stopped ends etc. complete all as specified & directed. |
| 70 | Demolition of breaking up 200 mm dia drain pipe including fittings of any desciption in any position and removing rubbish upto a distance of n. exc 50 mtr all as specified |
| 71 | M&L salt glazed stone ware drain pipe 200 mm bore grade 'A' laid in trenches and jointed with CM 1:1 complete all as specified |
| 72 | Removing excavated material surplus soil to a distance n. exc 250m and depositing where dircted at a level n. exc 1.5m above the starting point complete all as specified |
| 73 | M&L for factory made perforated heavy HD-20 precast cement concrete manhole covers 75mm thickness and size (0 50m x 1 06m) consisting of MS iron fillet along the perimeter of sides and weight of cover should not be less than 80kg all as specified and directed |
| 74 | Construction of septic tank for 50 users which includes excavation in ordinary soil,PCC in foundation, brick work, Ei RCC slab work in type A1 (1:1.5:3) , reinforcement,Manhole covers, CI vent shaft and sludge, chamber etc complete all as shown in drawing No CEJZ/2004/TD/S-17, sheet No-1/1 dated 11 May 2004 (Revised06 Aug 2005) complete all as specified and directed. |
| 75 | Construction of Soakage wells of size 3 00 x 3.00m, excavation in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size complete all as specified and directed. |
| 76 | M & L for Point wiring for One light point/fan point controlled by one switch 5 amp. with 1.5 sqmm (nominal area) single core PVC insulated sheathed (FRLSH) cable, 1100 volts grade, multi-stranded copper conductor, in universal colour code with & including suitable size of rigid non-metallic PVC conduit (not less then 20 mm dia med gd) and its all accessories complete concealed in wall and modular flush metal boxes with modular cover plates & frames for mounting modular switches, sockets, regulators etc. including earth wire of PVC insulated (FRLSH) copper conductor multistranded of 1.5 sqmm size in green colour complete all as specified in current SSR Part-I & II & directed by the Engineer-in-Charge, as described below:- |
| 77 | All as per item No.4 here-in-above but for One 5 Amp 5 pin socket outlet point on same board with other switches including earth wire as specified. |
| 78 | All as per item No.4 here-in-above but for One 5 Amp 5 pin socket outlet point on independent board with other switches including earth wire as specified. |
| 79 | All as per item No.4 here-in-above but for 3 pin/ 5 pin, sockets outlet,15 amps with 4.0 sqmm PVC insulated & unsheathed (FRLSH), multi-stranded copper condutor cable, independent, Point wiring complete all as specified and as directed . |
| 80 | Supply and Fixing Modular switch 6 Amps single pole one-way, 1 Module complete. |
| 81 | Supply and Fixing Modular switch 16 Amp single pole one way,1 Module all as specified. |
| 82 | Supply & Fixing Modular fan Regulator electronic step type, 120 Watt, 2 Module complete all as specified. |
| 83 | Supply and Fixing Modular socket 2-in-1, 5 pins 6 Amps, combined 2 Module complete all as specified. |
| 84 | Supply and Fixing Modular socket 2-in-1,3 and 5 pins 6 /16 Amps, combined 2 Module complete. |
| 85 | S&F Lamp holder, PVC/ Polycarbonate type with back plate suitable for batten |
| 86 | S&F ceiling rose surface bakelite 65mm x 50mm three terminals complete . |
| 87 | Supply and fixing LED lamp, 9 watt, B-22 base complete. |
| 88 | S&F indoor decorative ultra slim surface/ wall mounted LED batten tube light fitting complete, 1x 20 watt with polycarbonate channel housing & integrated electronic driver, energy efficient, 140V-270 volts, co- related colour temperature (CCT) of 6500K, >100 Lm/Watt complete with all accessories internally pre-wired and including connecting up with pvc insulated pvc sheathed twin core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge. |
| 89 | Supply and install of 36W LED building security light fitting with lens & driver, powder coated pressure die cast aluminium, top opening and maintainable with heat resistance toughened glass, built-in Short-Circuit Protection, Over voltage Protection and Surge Protection, IP-65 proction with luminaire efficiecy of greater than 80Lumen/Watt, Colour rendering (CRI) of ≥ 70 and co- related colour temperature (CCT) of 5700K (±500K) . The luminaire should have 10 KV surg protection, PF ≥ 0.9 and total harmonic distortion of THD ≤ 10%, voltage range of 140-280V including all connections complete all as specified. |
| 90 | M&L for building security light bracket made out of 40mm dia light grade GI pipe |
| 91 | M&L for Sub Main Wiring for DB to DB with two runs single core 10 Sqmm PVC insulated unsheathed (FRLSH) cable with stranded copper conductor drawn in suitable size of rigid non-metallic PVC conduit and its all accessories complete concealed in wall/roof with and including 10 Sqmm copper green colour earth wire all as specified and directed by Engineer-in-Charge.(02 run 10 Sq mm single core cable, one run of 10 Sq mm earth wire & One run of PVC conduit will measured as one RM). |
| 92 | S&F MCCB 100 Amps, breaking cap 36 KA, 3 Pole, 415V adjustable type complete all as specified and directed. |
| 93 | S&F MCB distribution board, SPN 12 way, double door, sheet steel, phosphatised, powder painted with bus-bar 200Amp, neutral link, earth bar and din rail, cable ties for cable management, 240 V, complete all as specified. |
| 94 | S&F powder coated CRCA steel sheet MCB distribution board, IP-43 IK-09 protection, double door recess mounted, TPN, 4Way complete all as specified. |
| 95 | S&F MCB SPN, 40-63 Amps, 'C' series, breaking cap 10 kA, 240V in MCB DB complete with electrical connection all as specified and directed. |
| 96 | S&F MCB SP, 6-32 Amps, 'C' series, breaking cap 10 kA, 240V in MCB DB complete with electrical connection all as specified and directed. |
| 97 | S&F MCB SP, 2-63 Amps, breaking cap 10 kA, 240V in MCB DB complete with electrical connection all as specified and directed. |
| 98 | M&L for earthling complete with galvanized steel earth plate eletrode 60x60 cm x6.3 mm thick burred directly in ground (earth pit not less than 2.25 meters deep below ground level with top edge of the plate not less than 1.5 Metrs below normal ground level connected to galvanized earth lead wire 4.00mm dia by means of bolts, nuts check nuts and washers of galvanized iron or steel all as shown in electrical plate No.5 connected to earthling test point all as specified and indicated including testing on completion including excavation and arth work PCC pit & RCC pit over funnel with watering pipe wire mesh GI protection pipe etc complete. Please Enable Macros to View BoQ information |
