|
| 1 | Supply, Installation, Testing and Commissioning (SITC) of outdoor-type Centralized Control and Monitoring System (Smart Control Feeder Panel / CCMS Panel), complete with enclosure, incomer and outgoing switchgear, power contactors, metering instruments, RTU/gateway with optical-fibre and SIM communication, smart energy meter, surge protection, internal wiring, earthing and all accessories, strictly as per Clause 2.2.7 and the approved CCMS Wiring Diagram. Make as approved by DSCL and as directed by the Engineer-in-Charge. |
| 2 | Supply and fixing of single-pole miniature circuit breaker (MCB), 6 A to 32 A rating, 240 V, 10 kA breaking capacity, ‘C’ curve, in the existing MCB distribution board, complete with connections as required. Make as approved by DSCL and as directed by the Engineer-in-Charge. |
| 3 | Providing, laying and fixing of 1100 V grade aluminium-conductor, XLPE-insulated, PVC-sheathed, armoured power cable of size 3.5 Core × 25 sq.mm, on surface or in duct, for the CCMS panel feed, including jointing kits and aluminium lugs, complete as required. Make as approved by DSCL and as directed by the Engineer-in-Charge. |
| 4 | Providing, laying and fixing of 1100 V grade aluminium-conductor, XLPE-insulated, PVC-sheathed, armoured power cable of size 4 Core × 10 sq.mm for the overhead and underground cabling system, including jointing kits and aluminium lugs, complete as required. Make as approved by DSCL and as directed by the Engineer-in-Charge. |
| 5 | Supply and laying of 63 mm dia (OD 70 mm / ID 58 mm) ISI-marked DWC pipe conforming to IS 14930 Part II, with all accessories (sockets, bends, couplers), including cutting and jointing, laid direct in ground 75 cm below ground level, including excavation and refilling but excluding sand cushioning and protective covering, complete as required. Make as approved by DSCL and as directed by the Engineer-in-Charge. |
| 6 | Supply and laying of 63 mm dia (OD 63 mm / wall thickness 3 mm) ISI-marked HDPE pipe conforming to IS 14930 Part II, with all accessories (sockets, bends, couplers), including cutting and jointing, laid direct in ground 75 cm below ground level, including excavation and refilling but excluding sand cushioning and protective covering, complete as required. Make as approved by DSCL and as directed by the Engineer-in-Charge. |
| 7 | Supply and laying of 50 mm dia (OD 50 mm / wall thickness 3 mm) ISI-marked galvanised-iron (GI) pipe conforming to IS 14930 Part II, with all accessories (sockets, bends, couplers), including cutting and jointing, laid direct in ground 75 cm below ground level, including excavation and refilling but excluding sand cushioning and protective covering, complete as required. Make as approved by DSCL and as directed by the Engineer-in-Charge. |
| 8 | Supply, Installation, Testing and Commissioning of 1 m GI earthing / grounding system for the LED street-lighting installation conforming to IS 3043, comprising: GI earthing rod 40 mm × 1 m; chemical compound bag 15 kg (1 No.); maintenance-free conductive gel (2.5 L); 8 sq.mm GI wire; inspection cover 300 × 300 mm; including installation, commissioning and all incidental charges, complete as required. Make as approved by DSCL and as directed by the Engineer-in-Charge. |
| 9 | Supply, Installation, Testing and Commissioning of 2 m GI earthing / grounding system for the LED street-lighting installation conforming to IS 3043, comprising: GI earthing rod 40 mm × 2 m; chemical compound bag 15 kg (2 Nos.); maintenance-free conductive gel (5 L); 8 sq.mm GI wire; inspection cover 300 × 300 mm; including installation, commissioning and all incidental charges, complete as required. Make as approved by DSCL and as directed by the Engineer-in-Charge. |
| 10 | Providing, laying and fixing of 1100 V grade copper-conductor, PVC-insulated, PVC-sheathed cable of size 3 × 2.5 sq.mm, on surface or in duct, including jointing kits and copper lugs, complete as required. Make as approved by DSCL and as directed by the Engineer-in-Charge. |
| 11 | Supply of Ground Type-A chemical anchor-bolt set for pole foundation: M20 × 400 mm, grade 8.8 (4 bolts = 1 set) with chemical anchor (82 ml × 4 = 328 ml per set), complete as required. Make as approved by DSCL and as directed by the Engineer-in-Charge. |
| 12 | Supply of Ground Type-B chemical anchor-bolt set for pole foundation: M20 × 400 mm, grade 8.8 (4 bolts = 1 set) with chemical anchor (82 ml × 4 = 328 ml per set), complete as required. Make as approved by DSCL and as directed by the Engineer-in-Charge. |
| 13 | Supply, Installation, Testing and Commissioning of 5 m decorative pole (IP66) with cast-aluminium embellishments and single-arm bracket, fitted with a 60 W LED hanging luminaire (3000 K warm white). The pole comprises a lower section of 90 mm × 4 mm RHS pipe (approx. 1075 mm) and an upper section (approx. 2925 mm) of hot-dip galvanised mild-steel tube; cast embellishments fitted and sealed by grub screw as per drawing; service window at base with 25 A connector terminal and MCB of suitable rating; pre-coated and polyurethane-painted to the approved shade. The 60 W LED luminaire shall have a die-cast aluminium housing, metal-clad PCB and LED driver. Complete as per Clause 2.2.4 and 2.2.6 and the approved drawing. Make as approved by DSCL and as directed by the Engineer-in-Charge. |
| 14 | Supply, Installation, Testing and Commissioning of 5 m decorative galvanised-steel pole (IP66) with cast-aluminium embellishments and single-arm bracket, fitted with a 60 W LED hanging luminaire (3000 K warm white). The pole comprises a lower section of 1000 × 140 × 4 mm and an upper section of 4000 × 75 × 3 mm hot-dip galvanised mild-steel tube; cast-aluminium embellishments fitted and sealed by grub screw as per drawing; service window at base with 25 A connector terminal and MCB of suitable rating; pre-coated and polyurethane-painted to the approved shade. The 60 W LED luminaire shall have a die-cast aluminium housing, metal-clad PCB and LED driver. Complete as per Clause 2.2.4 and 2.2.6 and the approved drawing. Make as approved by DSCL and as directed by the Engineer-in-Charge. |
| 15 | Supply, Installation, Testing and Commissioning of 240 W LED flood luminaire with high-efficiency LED source, pressure die-cast aluminium housing, toughened-glass cover, IP66 protection, surge protection and high-power-factor constant-current driver, complete with mounting accessories, wiring, fixing, testing and commissioning. Technical particulars: wattage 240 W; housing pressure die-cast aluminium; ingress protection IP66; input 140–270 V AC, 50 Hz; power factor > 0.95; surge protection ≥ 10 kV; CRI ≥ 70; correlated colour temperature (CCT) 4000 K (neutral white); luminous efficacy ≥ 120 lm/W; operating temperature –10 °C to +50 °C; adjustable MS/GI mounting bracket; BIS-approved constant-current driver; minimum rated life 50,000 burning hours; corrosion-resistant powder-coated finish; for outdoor area and flood lighting. Complete as per Clause 2.2.3. Make as approved by DSCL and as directed by the Engineer-in-Charge. |
| 16 | Supply, Installation, Testing and Commissioning of 3.5 m decorative pole with 40 W LED post-top luminaire (3000 K warm white), fabricated from MS steel pipe with gravity-cast-aluminium embellishments and horizontal arm as per drawing (dimensional tolerance ± 5%). The pole shall have an in-built junction box with 32 A connector and 6 A MCB behind a flush door; a surface-mounting base plate (IS 2062:2011 grade E250) welded at the base with elongated holes for alignment, with hot-dip GI foundation bolts and nuts (grade 5.6); hot-dip galvanised to ISO 1461 and PU-painted to the approved RAL shade. Manufacturer shall hold ISO 9001 / 14001 / 45001 and CE certification with in-house NABL laboratory; welding process and welders shall be TPI-certified. Material grades: MS steel pipe YST 240 / YST 210; base plate IS 2062 E250A; cast aluminium LM-6; galvanising ISO 1461. Complete as per Clause 2.2.5 and 2.2.6. Make as approved by DSCL and as directed by the Engineer-in-Charge. |
| 17 | Comprehensive Operation and Maintenance of the street and decorative lighting system (poles, brackets, luminaires, control panels, switchgear, hardware, software, tools and all components) for 3 (three) years, excluding the Defect Liability Period, as per Section 2.4 and 2.5 and as directed by the Engineer-in-Charge. Please Enable Macros to View BoQ information |
| 18 | Comprehensive Operation and Maintenance of the street and decorative lighting system (poles, brackets, luminaires, control panels, switchgear, hardware, software, tools and all components) for 3 (three) years, excluding the Defect Liability Period, as per Section 2.4 and 2.5 and as directed by the Engineer-in-Charge. Please Enable Macros to View BoQ information |
