|
| 1 | Providing and laying vitrified floor tiles of size 600X1200 mm with 15mm minimum thickness in all colour shades made using Full Body Technology with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.) as per approved drawings complete in all respect to the entire satisfaction of Engineer in charge. |
| 2 | Size 600x1200 mm |
| 3 | Fixing glazed/ Ceramic/ Vitrified floor tiles withcement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. |
| 4 | Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. |
| 5 | Chipping of existing Kota stone flooring, raking of joints, cleaning of surface for laying of tiles complete in all respect to entire satisfaction of Engineer in charge |
| 6 | Providing and laying Polished Granite stone 18 mm thick flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge |
| 7 | Providing and supplying aluminum extruded tubular and other aluminum sections as per the architectural drawings and approved shopdraw ings , the aluminum quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminum frame work. Nothingextra shall be paid on this account). The weight of aluminum extruded section shall be taken for purpose of payment.Providing and supplying aluminum extruded tubular and other aluminum sections as per the architectural drawings and approved shopdraw ings , the aluminum quality as per grade 6063 T5 or T6 as per BS 1474,including supe durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminum frame work. Nothing extra shall be paid on this account). The weight of aluminum extruded section shall be taken for purpose of payment. |
| 8 | Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including: |
| 9 | Providing and fixing 12 mm thick frameless toughened glass door shutter including providing and fixing top & bottom pivot & making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge |
| 10 | Providing and fixing Patch fitting code Lo10-Yale corner lock with cylinder to be fixed over openable glass pannel approved list make by department to the entire satisfaction of engineer-in-charge. |
| 11 | Providing and fixing of ASSA-YALE/Stanley-Wall/Dorma crownYEH-01 (450X25mm H type handles with extended spingle back to back with 300 mmm CTC adjustable fiixing for doors including the fixing accessories complete to entire satisfactoin of Engineer in charge |
| 12 | Providing and fixing of crown Floor spring with standard spindle conforming to double cylinder non handed unit suitable for door upto 150kg leaf weigh complete including the fixing accessories complete to entire satisfactoin of Engineer in charge |
| 13 | Providing & fixing of knobset made of stainless steel body, having provision of latch and bolt, 3 nos key set, inside push lock model ETL-101A, Finish SS/PB/AB make-ENOX or any equivalent (Lock should be releasable from out side in case of emergency) as per requirement for unisex toilet for PwD complete as per specifications, Harmonised guidelines for PwD and as desired by engineer-in charge |
| 14 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including cost of neat coat of cement disposal of rubbish to the dumping ground within 50 mtr lead |
| 15 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes,M.S. tube challies, M.S.clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of ngineer in charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done. |
| 16 | Extra rate for fixing of Toughened glass of height more than 3mtr including the cost of labour, machinery etc |
| 17 | Providing supplying and fixing of Main entry automatic 2 doors of size (1 Mtr. Each) Sensor operator including all the fittings related to sensor door complete in all respect to entire satisfaction of Engineer in charge |
| 18 | Providing and fixing BWP plywood 19 mm thick heat Retardant/Resistance , waterproof of approved make over existing wooden/aluminum/ GI frame work including necessary screws, adhesive etc complete to the entire satisfaction of Engineer-in-Charge. |
| 19 | Providing and Fixing ceiling consisting of 12.5mm thick Gypsum Board of any size G.I. Cradling hanged from the ceiling by means of G.I.hanger complete as per drawings, specifications and to the entire satisfaction of engineer-in- charge. |
| 20 | Providing and fixing 4mm thick 300mm wide Asbestos sheet with gatties and screw on vertical expansion joints one side fixed and one side fixed with slotted holes complete in all respect as per specifications. |
| 21 | Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflection > 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge. |
| 22 | With 20 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.7) |
| 23 | Providing and fixing 12 mm thick toughened glass of approved brand and manufacture in MS railing and aluminum sections with necessary Adhesives/screws etc., all complete as per direction of Engineer-in-charge. |
| 24 | Providing & fixing16 gaugestainless steel pipe railing of grade 304 duly fixed on steps with the help of bolts grouted on steps with hand rail and newel post of 50mmdiaStainless steel pipe, Balustersof 40mm dia Stainlesssteel pipeand guard 3Nos of 15mm dia StainlessSteel pipe complete in all respect |
| 25 | Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish |
| 26 | Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two or more coats) |
| 27 | Providing and fixing glass film as per site requirement to the entire satisfaction of engineer-in-charge. |
| 28 | Providing and fixing 6mm HDHMR approved make over existing wooden/aluminum/ GI frame work including necessary screws, adhesive etc complete to the entire satisfaction of Engineer-in-Charge. |
| 29 | Chil wood wrought planed and fixed in position |
| 30 | Providing & Fixing decorative high pressure laminated sheet 1mm (2 Star) thick with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. |
| 31 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. |
| 32 | Extra for providing & fixing Steel beading of approved shape steel tube beading size 12mmX 12mm,18gaugeofapprovedshapeandsection withscrew for fixing of glass panes instead of glazing clips and metals lash putty in steel doors, windows & Ventilators complete in all respect |
| 33 | Providing and fixing of Moulding of teak wood on paneling, walls etc of size 20-25 mm including the cost of nails, fevicol, cutting, etc complete in all respect to entire satisfaction of Engineer in charge |
| 34 | Providing and fixing 5-6 mm thickply ISI marked should be pasted with best quality adhesive & nails over existing wooden frame as per approved drawings as per approved drawings complete in all respect to the entire satisfaction of Engineer in charge. |
| 35 | Providing and fixing of patch fitting code LO 10/ Coroner Lock with cylinder to be fixed over openable glass panel approved list make by department to the entire satisfactions of engineer-in-charge. |
| 36 | Providing and fixing patch fitting code po 10 patch fitting bottom patch approved list make by department top be fixed at bottom of openable glass to the entire satisfaction of engineer-in-charge. |
| 37 | Providing and fixing patch fitting code patch fitting top pannel patch as per approved list make by department to be fixed over openable glass to the entire satisfaction of engineer-in-charge. |
| 38 | Making cutout position except holes to toughened glass with smooth finishing to entire satisfaction of Engineer-in-Charge. Please Enable Macros to View BoQ information |
