|
| 1 | Supplying and delivery of following size Armoured cables XLPE/PVC insulated are designed for 1.1 kV Stranded Aluminium conductor, high tensile galvanized steel wire/strip armour for mechanical protection, and PVC/FR PVC outer sheathing power cable of following size. ) [Make Polycab / RR /KEI/ Havells/ Gloster as approved by E.I.C] |
| 2 | 4 core 185 sqmm [From Sub-Station Panel to VTPN DB Located at AC Panel Room(Top Floor)] (Double Run) |
| 3 | 4 core 95 sqmm [From AC Panel (Located at TOP Floor) to VTPN DB] |
| 4 | 4 core 35 sqmm [From VTPN DB To AC ODU] |
| 5 | Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below as per GS. |
| 6 | 4 Core x 185 sq.mm |
| 7 | 4 core 95 sqmm |
| 8 | 4 core 35 sqmm |
| 9 | Finishing of the XLPE/PVC insulated armoured cable ends by soldering with cable sockets and insulated tapes etc., including supplying sockets, soldering materials, tapes etc. and making connection to switch, BDB and BBC etc as per GS. |
| 10 | 4 Core x 185 sq.mm |
| 11 | 4 core 95 sqmm |
| 12 | 4 core 35 sqmm |
| 13 | Laying of one cable above 150 sqmm and upto 300 sqmm through existing covered masonry trench incl. taking out RC covers, setting them in order, mending good the damages filling the trench with fine dry sand incl. supplying sand as per GS. (For 2 run x 4 core 185 sqmm ) |
| 14 | Laying only Cable above 50 sqmm but not exceeding 400sqmm through existing RCC/ Hume/GI Pipe/open masonary trench for single, 2, 3, 3½ and 4 core as per GS. (For 2 run x 4 core 185 sqmm ) |
| 15 | Laying of cable as below, on existing Cable Tray and binding with suitable size GI wire as per GS. Above 150 sqmm (For 2 run x 4 core 185 sqmm ) |
| 16 | Do…....Do….....Up to 50 sqmm. (For 4 core 35 sqmm ) |
| 17 | Laying of cable above 3½ core 90 sqmm and upto 3½ core 150 sqmm on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting as per GS. (For 2 run x 4 core 185 sqmm ) |
| 18 | Do…..........Do…...(For 4 core 95 sqmm ) |
| 19 | Laying of cable from 3/3½ core 35 sqmm to 50 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting as per GS. (For 4 core 35 sqmm ) |
| 20 | Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. Up to 160A 4 way [Make: ABB/ Legrand/Havells/L&T as per GS] |
| 21 | Supplying and fixing 415 V Four Pole MCCB of Breaking capacity 25kA/35kA with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing DBs / enclosure and necessary connection 160 A [Make: ABB/ Legrand/Havells/L&T as per GS] |
| 22 | Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection. TP 63A [Make: ABB/ Legrand/Havells/L&T as per GS] |
| 23 | Supplying & fixing sheet metal (16 SWG) Iron Clad Busbar chambers on angle iron frame on wall, incl. earthing attachment and painting as required – ( As per Drawing no. 470 of PWD Specification Book – May 1991) Dimension of Al. bars [85mm long] : 4 bars 415 V, 600 A, 4 x 80x13mm ; Dimension of Sheet Metal Box :500x150mm as per GS. |
| 24 | Supply & Fixing of perforated GI cable tray with perforation not more than 17.5% suspended from ceiling incl. S&F GI connector, 6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support. With out angle iron support 150x50x1.25mm (18SWG) as per GS. |
| 25 | Supplying and fixing 415V, TPN Switch Disconnector Fuse Unit (SFU) with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. 630 A (Make -Lauritz Knudsen Cat No.SK90492/Legrand/Siemens as per direction of EIC) |
| 26 | Note: 1) All the above rates should be quoted inclusive of all taxes, duties and all ancilery charges with cost of maintenance, servicing, supply & replacement of spares for 1 (One) year from the date of commissioning. 2) Total is rounded off to the nearest rupees. Please Enable Macros to View BoQ information |
