|
| 1 | Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire(Brand approved by EIC) in 20 mm size PVC rigid conduit 'FR' (Precision make) incl. necy. Fittings as required [Wire Make: Havells/Polycab/RR Kabel/Finolex/Gloster] |
| 2 | 3 x (1.5 sqmm) |
| 3 | 2x(2.5 sqmm)+1x(1.5 sqmm) |
| 4 | 2x(4 sqmm)+1x (2.5 sqmm) |
| 5 | 2x (6 sqmm) + 1x (4 sqmm) |
| 6 | Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. |
| 7 | 2.5sqmm |
| 8 | 4sqmm |
| 9 | 6sqmm |
| 10 | Supplying and fixing 415V, 63A TPN on load front operated Changeover switch with Sheet Steel enclosure on angle iron frame on wall with nuts bolts etc. [Make: Havells/LK(L&T)/Standard/ABB] |
| 11 | Supply & Fixing 240 V, 4 nos. 6 A, 3 pin Modular type plug socket with 4 nos. 6A Modular type switch (Brand approved by EIC), 16A Modular switch type MCB (C-Curve) and Indicator without plug top on 2 row 18 Module GI Modular type switch board with 2 row 18 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. |
| 12 | Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. |
| 13 | Supply & Fixing 240 V, 25 A/27A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (C-Curve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. |
| 14 | Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc. |
| 15 | Supplying and fixing 415V, 100A HRC fuse base cutout unit (3nos) fixed on hylum sheet on wall with necessary nuts bolts washers etc incl. S & F 1 no. neutral link set. (Make-LK(L&T)/Havells/Standard) |
| 16 | Supply and delivery of 4 Core 25 sqmm. XLPE Insulated, Cores Laid Up, Thermoplastic Tape Inner Sheathed, Unamoured/ Armoured and Extruded PVC Type ST2 Outer Sheathed As Per IS‐7098 (Part 1) 2011 with Up To Date Amendments, Aluminium armoured cable. [Make:- Finolex/Havells/RR Kable / Polycab/Gloster] |
| 17 | Laying of cable upto 4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting. 4 core 25 sqmm |
| 18 | Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below. 4 core 25 sqmm |
| 19 | Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : 4 core 25sqmm |
| 20 | Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required |
| 21 | Connecting the equipment to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipment with bolts, nuts, washers, cable lugs etc. as required and mending good damages. No. 4 SWG |
| 22 | Supplying and fixing 415V, 63 A TPN SFU with sheet steel enclosure on angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. [Make: Lauritz Knudsen (L&T)/Siemens/ABB] |
| 23 | Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. 4 way [Enclosure 607715] Incomer:- 415 V 4 Pole 63 A MCB Isolator - 01 Nos Outgoing:- 240 V 1 Pole 6-32 A MCB [Breaking capacity 10kA & C characteristics] - 12 Nos [Make:- Lrgrand/Schneider/Seimens] |
| 24 | Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works.20 mm dia |
| 25 | Supplying and fixing double door SPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. SPNDB ---2+6 way Incomer:- 240 V 2 Pole 32 A MCB Isolator - 01 Nos Outgoing:- 240 V 1 Pole 6-32 A MCB [Breaking capacity 10kA & C characteristics]- 06 Nos [Make:- Lauritz Knudsen(L&T)/Schneider/Seimens/Lrgrand] Please Enable Macros to View BoQ information |
