|
| 1 | Repairing and rewinding of 0.5H.P, 240-volt single phase Booster pump with super enamelled copper winding wire of suitable size including dismantling of all scrap material and re-assembling, testing & necessary late work etc. as required. (scrap material retained by firm) |
| 2 | Repairing and rewinding of 0.5H.P, 240-volt single phase submersible motor with super enamelled copper winding wire of suitable size including dismantling of all scrap material and re-assembling, testing & necessary late work etc. as required. (scrap material retained by firm) |
| 3 | Repairing and Rewinding of 01 H.P, 240-volt single phase horizontal type (open well) submersible motor with PVC insulated submersible winding wire with suitable size including replacement of defective SS Gun Metal Bush, thrust bearing, Oil Seal etc as required and testing after reassemble. (scrap material retained by firm) |
| 4 | Repairing and Rewinding of 01 H.P, 240-volt single phase monoblock pump with PVC insulated submersible winding wire with suitable size including replacement of defective SS Gun Metal Bush, thrust bearing, Oil Seal etc as required and testing after reassemble. (scrap material retained by firm) |
| 5 | Repairing and Rewinding of 5H.P, 240-volt single phase horizontal type (open well) submersible motor with PVC insulated submersible winding wire with suitable size including replacement of defective SS Gun Metal Bush, thrust bearing, Oil Seal etc as required and testing after reassemble. (scrap material retained by firm) |
| 6 | Repairing and Rewinding of 7.5 H.P, 415-volt 3 phase horizontal type (open well) submersible motor with PVC insulated submersible winding wire with suitable size including replacement of defective SS Gun Metal Bush, thrust bearing, Oil Seal etc as required and testing after reassemble. (scrap material retained by firm) |
| 7 | Repairing and Rewinding of 10 H.P, 415-volt 3 phase vertical type submersible motor with PVC insulated submersible winding wire with suitable size including replacement of defective SS Gun Metal Bush, thrust bearing, Oil Seal etc as required and testing after reassemble. (scrap material retained by firm) |
| 8 | Repairing and Rewinding of 15 H.P, 415-volt 3 phase horizontal type (open well) submersible motor with PVC insulated submersible winding wire with suitable size including replacement of defective SS Gun Metal Bush, thrust bearing, Oil Seal etc as required and testing after reassemble. (scrap material retained by firm) |
| 9 | Repairing and Rewinding of 20 H.P, 415-volt 3 phase horizontal type (open well) submersible motor with PVC insulated submersible winding wire with suitable size including replacement of defective SS Gun Metal Bush, thrust bearing, Oil Seal etc as required and testing after reassemble. (scrap material retained by firm) |
| 10 | Lifting and lowering of 10/15/20 HP vertical type submersible motor pump set along with column pipes and submersible cable 400-foot deep borewell as per direction of engg in charge and testing and making motor in working condition etc as required. |
| 11 | Repairing of Pump unit of 10 H.P, 415-volt 3 phase vertical type submersible motor with replacement of Gun Metal Bush, neck ring, sleeve, Impeller & nuts tight and necessary late work and testing after reassemble. (scrap material retained by firm) Please Enable Macros to View BoQ information |
