Tender For Maintenance Of Street Lights, High Masts On Delhi Pwd Roads Under Pwd M-South Division During 2026-27. (Sh: Replacement Of Wornout/Out Of Warranty With Upgraded Led Street Light Fittings At Various Road Under M-South Division.), Delhi-Delhi
TDR : 56039339
Tender Notice
BOQ
4 Days Left
Delhi
Delhi
Tender For Maintenance Of Street Lights, High Masts On Delhi Pwd Roads Under Pwd M-South Division During 2026-27. (Sh: Replacement Of Wornout/Out Of Warranty With Upgraded Led Street Light Fittings At Various Road Under M-South Division.)
Name of Work:- Maintenance of Street Lights, High Masts on Delhi PWD Roads under PWD M-South Division during 2026-27. (SH: Replacement of Wornout/Out of Warranty with upgraded LED street light fittings at Various Road Under M-South Division.)
Sl. No.
Item Description
1
Supplying, installation, Testing & Commissioning of Street light LED fixture, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED,Driver & electrical circuitary) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).
2
90 watt
3
150 watt
4
200 watt
5
Credit for the below mentioned accidental/distorted items i/c dismentling and shifting from site:-Assorted size Old wornout/Out of Warranty fittings Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
