Tender For Repair/ Replacement Of Roof, Plaster, Joinery, Plumbing And Allied Works At Dtf, Vtf, 416 Engr Bde, Icc Unit And Adjacent Area Under Age B/R-Ii Of Ge(North) Meerut Cantt
Tender Value
Ref. Documents
Estimated cost
Bid Submission
09 Jul 2026
5 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Meerut → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Replacement Of Roof, Plaster, Joinery, Plumbing And Allied Works At Dtf, Vtf, 416 Engr Bde, Icc Unit And Adjacent Area Under Age B/R-Ii Of Ge(North) Meerut Cantt
BOQ
| Sl. No. | Item Description |
| 1 | Please Enable Macros to View BoQ information |
| 2 | Attending complaints related to plumbing/water supply and obtaining completion from user including minor repair such as replacement of washers, tightening of taps, tightening of check nuts/unions/sockets/PVC connection etc and making water supply functional in case of blockage, refixing of GI pipe joints, application of white cement where required, complete all as specified and directed. Note : (I )Only experienced 01 Nos plumber shall be used to attend day to day complaints for above mentioned complaint shall be issued under respective item. (II) Contractor or his representative shall collect the complaints at 0830hrs from complaint cell of AGE B/R-II and the complaints shall be attended / make good/rectified within 24hrs on receipt of the complaints and info the status of the complaint at 1700hrs every day to complaint cell. On failure of the same a penalty of Rs 250/- per day per complaints shall be charged. |
| 3 | Attending complaints related to Carpenter Work , including repair and easing of wooden & aluminium doors, windows , re-fixing or retightening of doors, windows, resecuring of door/window wire guage etc including nails, screws etc required to make good the work, complete all as specified and directed |
| 4 | Attending complaints related to mason work such as repair to existing damaged plaster/ floor/ plinth protection/ jointing of damage brick/stone work in minor patches not exc 2.00 Sqm each including matching the surface with existing finish with necessary material like cement, sand, lime aggregate, brick stone etc complete all as specified and directed. |
| 5 | Taking down and refixing door shutters of any description of area exc 1.0 Sqm but n.exc 2.0 Sqm each in the same opening including easing of door/window/cup board shutters for easy closing/ opening incl tightning of hinges or changing the position of hinges adjustment of tower bolts, sliding bolts etc complete all as specified and directed. |
| 6 | Demolition of brick work or stone/boulder masonary built in cement mortar incl all quoins arches pillars etc complete all as specified and directed. |
| 7 | M&L for brick work with fly ash old size bricks, straight or curved on plan exceeding 6 cm mean radius built in cement mortar 1:6 complete all as specified and as directed. |
| 8 | All as described item Ser No 6 here-in-before but except bricks any types but curved on plan to any radius in cement mortar 1:6 complete all as specified and directed. |
| 9 | M&L for brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 complete all as specified and directed. |
| 10 | Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) n.exc 1.50 Sqm each complete all as specified and directed. |
| 11 | Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) exc 1.50 Sqm & n exc 4 Sqm each complete all as specified and directed. |
| 12 | Taking down Shutters of any description exc 1 sq. m but n exc 2 sqm each complete all as specified and directed. |
| 13 | M & L for Anodised aluminium Powder Coating (minimum thickness of powder coating 50 micron) frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed. |
| 14 | S&F Powder coated (Thickness or powder coating not less than 50 micron) anodised aluminium door shutters of aluminium sectioin weighing 0.55kg/m (minimum) including necessory joining cleats ,glazing clips, rubber neoprene packing, handles 2 Nos in each door, stainless steel hinges, sliding door bolts, tower bolts and anodised aluminum snap beading screws etc. complete all as specified and directed |
| 15 | S&F 9mm thick Prelaminatd particle board interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed. |
| 16 | S&F Glazing with sheet glass, 4.8mm thick, ordinary quality and glazing with oil putty and glazing pins in each pane complete all as specified and directed. |
| 17 | S&F powder coated anodised aluminium ventilators with sash bars, aluminium sections weighing 0.55 Kg/mtr (minimum) incl stainless steel mosquito proofing wire mesh fixed with , clips, frame , necessary joining cleats, glazing clips, neoprene rubber gasket with aluminium beading screws suitable anodised fittings such as hinges, handles including powder coated anodised aluminium frame, grill with one or more rebates including S&F 4.00 mm thick frosted glass complete all as specified and directed. |
| 18 | S&F powder coated anodised aluminium sliding glazed window with three track / shutter, three shutter sliding with following specification complete all as specified and directed.(i) Window frame of cross section 101 mm x 44mm x 1.5mm thick (ii) Three way track for sliding shutter of cross section 91.8 mm x 31.75mm x 1.1mm thick (iii) Sliding shutter frame of cross section 40 x 18 x 1mm thick(iv) 4 mm thick tinded glass supeiror quality (v) IDPE rubber gasket for fixing of glass (vi) Locking cleats per shutter 1 Nos (vii) Sliding rollers per shutter - 02 Nos (viii) Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 for shutter 1 No (ix) Fixing of screw for frame with wall per window -08 Nos |
| 19 | S & F for 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels,commercial type on both sides face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed. |
| 20 | S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) complete all as specified and directed. |
| 21 | S&F factory made solid panel PVC door shutter 30mm thick ( style) consulting of frame MS tubes fro top or bottom rails MS frame shall be covered with heat moulded plain clour PVC 'C' channel having a PVC sheet strips of 20mm with stick in side with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on other side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded sealed to bve sides and rails with suitable PVC sheet beading and joined together with solvent cement as per specification and drawing in SSR complete all as specified and directed. |
| 22 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as specified and as directed. (Note: stainless steel butt hinges and necessary S S crews shall be paid separately) |
| 23 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 24 | S&F 100mm stainless steel of 304 Gde Butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed. |
| 25 | S&F 150mm stainless steel of 304 Gde barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 26 | S&F 250mm size stainless steel of 304 Gde sliding door bolt with hasp staple ( bolt type ) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed. |
| 27 | S&F 150mm size stainless steel of 304 Gde, cast type anodised complete all as specified and directed. |
| 28 | M&L for Preparation of new wooden surfaces over 10 cm width or girth not otherwise described and applying two coat of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. |
| 29 | S&F in repairs Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed. |
| 30 | S & F in repairs hollow PVC Wall Lining consisting of 5mm thick having density more than 450 Kg/M3 printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed. |
| 31 | Hacking out old broken glass, glazing sheet (any thickness, size, quality or description) not exc 0.5 sq.m from metal frame in any position including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed. |
| 32 | M&L for 3mm thick figured glass, pin head type and glazing with oil putty in each pane complete all as specified and directed. |
| 33 | S&F Glazing with sheet glass, 3mm thick, ordinary quality and glazing with oil putty and glazing pins in each pane complete all as specified and directed. |
| 34 | M&L for Preparation of old painted wooden surfaces over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed. |
| 35 | M&L for Preparation of old painted steel or iron surfaces over 10 cm width or girth not otherwise described and applying two coat of synthetic enamel paint, complete all as specified and directed. |
| 36 | M&L for framed work such as grills, angle, hollow sections, grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to Fe-290 Grade E-165, complete all as specified and directed. |
| 37 | M&L for preparation of new surfaces of steel and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 38 | S&F in repairs SS wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and directed. |
| 39 | S&F in repairs aluminium sliding bolt 250 long bolt type with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed. |
| 40 | S&F in repairs heavy weight SS butt hinges 100mm in size complete all as specified and directed. |
| 41 | S&F in repairs stainless steel barrel tower bolt with bright bolt 200 mm long complete all as specified and directed. |
| 42 | S&F in repairs aluminium (Die cast) body, Door closer, hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and directed. |
| 43 | S&F in repairs stainless steel drapery rod of size 20mm inner dia (in lengths as directed) of approved colour with and including decorative finial at both ends and pair of stainless steel brackets fixed at both ends with PVC rawl plugs and screws on walls/beam complete all as specifed and directed. |
| 44 | Taking down of cement plaster of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 45 | M & L for 15 mm thick rendering in CM 1:4 on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified & directed. |
| 46 | M & L for 15 mm thick rendering in CM 1:6 on fair faces of brick or concrete surfaces finished even and smooth complete all as specified & directed. |
| 47 | M&L for rendering 5 mm thick on fair faces of concrete surfaces, finished even and smooth without using extra cement on ceiling in cement mortar (1:4) complete all as specified and directed. |
| 48 | Preparing new plaster surface of wall and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and directed. |
| 49 | Preparing new Plastered or unplastered surfaces of ceiling and applying three coat of white wash complete all as specified and directed. |
| 50 | Preparing new Plastered or unplastered surfaces of walls and applying three coat of white wash complete all as specified and directed. |
| 51 | Preparing old Plastered or unplastered surfaces of walls and applying one coat of white wash complete all as specified and directed. |
| 52 | Preparing old Plastered or unplastered surfaces of walls and applying two coat of white wash complete all as specified and directed. |
| 53 | Preparing old Plastered or unplastered surfaces of ceiling and applying one coat of white wash complete all as specified and directed. |
| 54 | Complete removal of existing treatment of wall, fins, chajja etc by scrapping with electric machine having vacuum machanism RPM not less than 1500, sanding pad of 80 grit of dia 7''/9'' to make surface free from smoke soot, moulds, moss and efforescent salts and trading oil and greasy spots and removing debris/ malba to low line area out side MoD land complete all as specified and directed. |
| 55 | M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old/new surfaces using painting with airless spray technology max pressure 3300 PSI with single spray gun on surface of walls complete all as specified and directed. Note: considered height upto 12m from FFL of Ground Floor. |
| 56 | M&L for applying ONE coat of oil bound distemper by using with fully automatic airless spray technology max pressure 3300 PSI with single spray gun on walls including preparation of old decorated surfaces shall include brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efforescent salts and trading oil and greasy spots complete all as specified and directed. |
| 57 | M&L for 2mm thick wall care putty Birla white/Jk wall care including prepration of smooth surface to receive painting coplete all as specified and directed. |
| 58 | Demolition of reinforced concrete of any description and any poisition not otherwise specifically provide reinforcement cut to faciliatate demolition complete all as specified and directed. |
| 59 | M & L for precast reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone aggegrate) as in Chullah hood chajja and manhole cover, kitchen shelves etc set in cement mortar 1:4.including all neccesary formwork & finishing exposed concrete surface complete all as specified and directed. |
| 60 | S&F precast cement concrete Jafri jallies, 35mm thick including all mouldings including Pre cast frame wk, using Type B0 1:2:4 (12.5mm aggregate) Set in cement mortar 1:4 complete all as specified and directed. |
| 61 | Cutting chases ,pinning in brick work girth exc 10cm but n exc 20 cm and making good to facing where required and poining ein cement mortar 1:3 to ends of edges of landing, sun shades, chajjas, shelves etc complete all as specified and directed. |
| 62 | S&F TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing clips complete all as specified and directed. |
| 63 | All as described item No 61 here-in-before but 6 to 8 mm dia complete all as specified and directed. |
| 64 | Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified and directed. |
| 65 | M&L for Non skid ceramic coloured tiles7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11Sqm but not exceeding 0.18 Sqm in floors/wall set and jointed in neat cement slurry and pointed with white or colour cemnt to match including 15 mm thick screed bed in CM 1:6 (cement : Coarse Sand) complete all as specified and directed. |
| 66 | S&F Virified Ceramic tiles double charge superior quality dark shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors/walls etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed or bedding layer CM 1:6 for laying floor finishes complete all as specified and directed. |
| 67 | S&F coloured Glazed ceramic coloured tiles in vertical surfaces (600x300x7mm) set and jointed in neat cement slurry and pointed in white or coloured cement to match as in vertical surfaces including 10mm thick back coat in CM 1:4 complete all as specified and directed. |
| 68 | M&L for vitrified ceramic tiles light shade 10 mm thick (square/rectangular) area of each tiles not exceeding 0.36 sqm, in floors etc, with neat cement slurry over and including 15 mm thick screed bed of cement mortar 1:6 including pointing in white or coloured cement with pigment to match the shade of tiles complete all as specified and directed. |
| 69 | All as described item No 67 here-in-before but on vertical surfaces such as skirting fixed on and including 10mm thick rendering in cement mortar 1:4 as backing coat complete all as specified and directed. |
| 70 | Taking up or down steel tubing and connection 15 mm bore pipe and removing from site complete all as specified and directed. |
| 71 | All as described item No.69 here-in-before but 20 mm bore pipe complete all as specified and directed. |
| 72 | Supplying and laying of CPVC 20mm outer dia pipes SDR 11 & Plain CPVC SDR 11, with all fittings, brass threaded fittings and fixed on walls/ceiling or laying in floors complete all as specified |
| 73 | Supplying and laying of CPVC 25mm outer dia pipes SDR 11 & Plain CPVC SDR 11, with all fittings, brass threaded fittings and fixed on walls/ceiling or laying in floors complete all as specified.incl holding the pipe with stainless steel ring with powder coated aluminium frame at 1 mtr c/c to be fixed walls where as required complete all as specified and directed. |
| 74 | Supplying and laying of 20mm bore galvanized iron tubes medium grade with all fittings and fixed on walls/ceiling or laying in floors complete all as specified. incl holding the pipe with stainless steel ring with powder coated aluminium frame at 1 mtr c/c to be fixed walls where as required complete all as specified and directed. |
| 75 | S&F Rotational moulded polythene water storage tanks (Cylinderical vertical with closed top) hoisted and fixed in position 500 ltrs, including 20 mm bore Ball PTMT valve, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed and dismantling of old water tank complete all as specified and directed. |
| 76 | S&F Rotational moulded polythene water storage tanks (Cylinderical vertical with closed top) hoisted and fixed in position 1000 ltrs, including ball PTMT valve 20 mm bore, high pressure with polythene ball & float and dismantling of old water tank complete all as specified and directed. |
| 77 | S&F in repairs 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete all as specified and directed. |
| 78 | S&F in repairs bib taps long body brass cromium plated fancy type 15 mm bore size screwed down screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 79 | S&F in repairs 15 mm dia stop cock/angle cock cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle, flench screwed both ends for iron or for union complete all as specified and directed. |
| 80 | S&F in repairs Pillar taps, cast copper alloy, fancy type cromium plated with capstan heads,chromium plated,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 81 | S&F in repairs of vitreous china squatting pan ‘Orrisa pattern’ size 580 x 440 mm white with integral foot rest lime concrete bedding and making good floor complete all as specified and directed. |
| 82 | S&F in repairs, vitreous china wash down water closet pan (Pedestal pattern), white with 'p' or 's' trap (excluding flushing cistern and flush pipe), including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc. complete all as specified and directed. |
| 83 | S&F in repairs Vitreous china premium/ 1st quality wash down water closet wall hung EWC single piece white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc.including combind flushing cistern & flush pipe complete all as specified and directed. |
| 84 | S&F in repairs vitreous china wash basin, size 550 x 400 mm including brackets and 32mm PVC waste pipe and coupling complete all as specified and directed. |
| 85 | S&F in repairs PVC valveless, syphonic action type (10 Ltr) flushing cistern low level white with intel ball valve, float and handle including bracket and flush pipe to squatt pattern closet including all joints and making good to the floor complete all as specified and directed. |
| 86 | S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 87 | S&F in repairs grating 125mm size of SS ( Minimum weight 100 gms) complete all as specified and directed. |
| 88 | S&F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes coupling; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 485mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 89 | S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm including waste coupling and waste pipe complete all as specified and directed. |
| 90 | S&F in repairs 600mm long heavy duty PVC Connection 15mm size with PTMT nuts complete all as specified and directed. |
| 91 | S&F in repairs PVC waste pipe 32mm dia for WHB, Urinal, Sink etc complete all as specified and directed. |
| 92 | S&F in repairs vitreous china urinal half stall white complete all as specified and directed. |
| 93 | S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed |
| 94 | S&F in Floor 140mm over all length with flap door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 95 | S&F in repairs looking mirror of size 600 mm x 450 mm mirror of selected quality glass fixing in PVC frame fixed with rawl plugs & screws complete all as specified and directed. |
| 96 | S&F in repairs chromium plated shower rose 125mm size with 450mm longcomplete all as specified and directed. |
| 97 | S&F in repairs CP brass soap dish complete all as specified and directed. |
| 98 | S&F in repairs 15 mm dia brass chromium plated central hole wash basin mixture, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut capstanhead screwed for 15mm dia pipe fixed complete all as specified and directed. |
| 99 | S&F in repairs 15 mm dia brass chromium plated central hole wash basin mixture, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut capstanhead screwed for 15mm dia pipe fixed complete all as specified and directed. |
| 100 | S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 101 | S&F in repairs fancy type glass corner fancy type of size 250mm x 250mm of 6 to 7mm thick toughned glass with CP railing fixed with fancy type screws complete all as specified and directed. |
| 102 | M&L for disconnecting existing tanks, setting aside (or lowering if required) for and cleaning and removing all scale and dirt etc from PVC tanks and from mouth of circulating pipes etc of tank capacity exc 250 ltr and not exc 500 ltr and hosted if required reconnecting & re-fixing in position including writing the date of tank cleaned, with synthetic enamel paint complete all as specified and directed. |
| 103 | All as described item No 101 here-in-before but exc 500 ltr and not exc 1000 ltrs complete all as specified and directed. |
| 104 | S&F in repairs 20mm dia gun metel globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 105 | S&F in repairs 15 mm gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. |
| 106 | S&F in repairs EWC seat covers any colour for pedestal pan with hinges complete all as specified and directed. |
| 107 | S&F in repairs Tubular towel rail, brass cromium plated 20mm dia, D type, 60cm long between flanges complete all as specified and directed. |
| 108 | S&F in repairs 75mm bore PVC Pipes single socketed in any length with rubber ring joints, fixed to walls and floor etc and supply and fixing powder coated aluminium frame and stainless steel ring to hold 75mm pipes in place at 1.5 mtr c/c to be fixed to wall as per site requirement complete all as specified and directed. Note: considered height upto 12m from FFL of Ground Floor. |
| 109 | S&F in repais 110mm bore PVC Pipes single socketed in any length with rubber ring joints, fixed to walls and floor etc. as in waste and rain water pipes and supply and fixing powder coated aluminium frame and stainless steel ring to hold 110mm pipes in place at 1.5 mtr c/c to be fixed to wall as per site requirement complete all as specified & directed.Note: considered height upto 12m from FFL of Ground Floor. |
| 110 | S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in repairs complete all as specified and directed. |
| 111 | S&F in repairs PVC(SWR) floor trap, 75mm bore, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 112 | S&F in repairs PVC Pipes single socketed in any length with rubber ring joints, fixed to walls, laid under floors etc. 75mm bore as in waste and rain water pipes complete all as specified & directed. |
| 113 | Dismantling wall and ceiling boards(fibre, pulp, insulation, etc) or insulation boards/slabs/blankets any thickness, including cover fillets complete all as specified & directed. |
| 114 | Providing & fixing false ceiling with semi perforated 12mm thick micro tegular edged GRG at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of size 595 x 595mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC 0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476(part4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of Hot dipped galvanized iron section of 0.33mm thick (galvanised @ 120grams per sqm including both sides) comprising of main-T runners of size 15x32mm of length 3000mm, cross-T of size 15x32mm of length 1200mm and secondary intermediate cross-T of size 15x32mm of length 600mm to form grid module of size 600x600mm suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85x85x2mm. Galvanised iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450mm centre to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions |
| 115 | S&F fibre cement coloured textured designer ceiling board 4mm thick of size 595x595 mm conforming to IS : 14862 & IS : 2380 Part-XIV fixed to timber / GI / Aluminium frame work with screws/clips complete all as per manufactures instructions complete complete all as specified & directed. |
| 116 | S&F GI snap grid frame work for false ceiling of size of grid 605x605mm all as specified and Hangers 2mm dia GI (upto 1200mm length) adjusting level fixed to steel frame work complete all as specified and directed. |
| 117 | Dismantling asbestos cement (corrugated, semi-corrugated, etc) sheet in roof coverings complete all as specified and directed. |
| 118 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roofcoverings complete all as specified and directed. |
| 119 | Dismantling unframed work timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed. |
| 120 | S&F pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with hot dip galvanised self dirilling and self tapping screws neoprene and EPDM washers complete all as specified, directed and as per manufacturer's instructions complete all as specified and directed. |
| 121 | S&F pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with hot dip galvanised self dirilling and self tapping screws neoprene and EPDM washers complete all as specified, directed and as per manufacturer's instructions complete all as specified and directed. |
| 122 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed. |
| 123 | S&F strucutral steel work (tubular/hollow/angle) in trusses, rafters, beams, purlins etc, including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and as as directed. |
| 124 | Taking down old existing water proofing treatment from the top of RCC/ arch slab, including taking down existing PCC padding or plaster and hacking the top of RCC slab, roof tile, cleaning with water and disposal of rubbish off the premises complete all as specified & directed.Note: considered height upto 12m from FFL of Ground Floor. |
| 125 | M&L for Providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in padding on roof finished the surface even and fair without using extra cement complete all as specified and directed. Note : considered height upto 12m from FFL of Ground Floor. |
| 126 | M&L for 10mm thick cement paster in CM 1:3 mixed with WPC @ 200ml by weight of 50kg cement finised even and smooth without using extra cement on roof surface (WPC will be measured and paid seperately as supply only rate complete all as specified and directed. Note: considered height upto 12m from FFL of Ground Floor.) |
| 127 | Supply only liquid water proofing compound complete all as specified and directed. |
| 128 | M&L for water prrofing tretment for sunken floors of kitchen , toilets, laboratories,WC's ect shall be as under (a) Applications of two components Acrylic modifed cementitious coating. i) the surfaces to be applied shall be completely dry and free from containments such as dirt,surfaces treatment and old coatings. concrete substractes must be mechanically prepared using blast cleanig or millling to remove cement laitance,existing coatings and acheive a gripping prof clean,dry and free from laitance and any other form of surface contamination. The installation instructions in manufacture's published literature should be strictly compiled with,but not limited to the following ii) chipping out any visible cracks in ''V-Groove'' pattern as applicable. special attention on cleaning of cracks & then filling those cracks with SIKA latex SBR 100 putty / Dr Fixit 302 SBR latex /Perma latex SBR / FOSROC Nitabond SBR latex/ Asian paint latex as required . Final cleaning of surface with power grinder,wire brush,hair brush &vacuum pressure if required. iii) Dampen all sorfaces immediatly ahead of application of Acrylic modifed cementitious coating of Sika Top Seal - 107 / brush bond FOSROC /Dr FIXIT /STP/CICO. iv) Whistle the surface is still damp from saturation(S.S.D), apply one coat of Acrcylic modifed cementitious coating of SIKA Top Seal -107/ Brush Bond FOSROC /Dr FIXIT /STP/CICO.of viscosity as per manufacturer's instructions. v) apply Glass Fabric Sheet of FOSROC /Dr FIXIT /STP/ whistle the first coat is wet. vi) Once touch dry , apply second coat of Acrcylic modifed cementitious coating of SIKA Top Seal -107/ Brush Bond FOSROC /Dr FIXIT /STP/CICOof viscosity as per manufacturer's instructions. on the entire area vii) Second coat shall be applied after 6-8 hrs of application of pervious coat and in the direction right angle to the perivious coat . |
| 129 | M&L for roof treatment in repair by complete removal of existing old treatment and treated with following specifications :-(a) Applying oil based bitumen primer @ 0.30 Ltr/Sqm on plastered surface and a coat of bitumenous tack coat 85/25 @ 1.20Kg/Sqm (b) Applying modified APP polymeric membrane 3mm thick and minimum weight 3.00 Kg / Sqm for water proofing of roof , sealing as directed at site with 100mm over laps as per manufacture's instruction.(c) Applying two coat of aluminium paint @200 gm/Sqm over bituminous surface of membrane. Note: considered height upto 12m from FFL of Ground Floor. |
| 130 | S&F in repairs fancy type vertical venation blinds consisting of alum head rail, vanes/louvers 4” wide of approved tint and traverse cord of any design & color complete fixed in position complete all as specified and directed. |
| 131 | S&F in repairs fancy type Roller blinds consisting of alum head rail, blind of approved tint and traverse of any design & colore complete fixed in position complete all as specified and directed. |
| 132 | Demolition of cement concrete of ground floor n exc 15 cm in depth in any position not otherwise specifically provided for complete all as specified and directed. |
| 133 | M&L for cement concrete type C-2, 1:3:6 using 40mm graded stone aggregate of 75 mm thick in floors complete all as specified and directed. |
| 134 | Providing, cement concrete 1:2:4, type B1 (20mm graded stone agg) in lintels upto 1..5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directing complete all as specified and directed. |
| 135 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded or pointed in cement mortor complete all as specified and directed. |
| 136 | M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plat forms and like vertical surfaces in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite including 15 mm thick screed in CM 1:4 for receiving Granite work complete all as specified and directed. |
| 137 | M&L for glory finish chequered cement concrete colour tiles size 300mm cmx300mmx25 mm thick, with colour pigment, set, jointed and pointed in neat cement slurry over and including 15 mm thick screed bed in cm (1:6) complete all as specified and directed. |
| 138 | M&L 75 mm thick cement concrete 1:4:8 type D-2 using (40 mm graded stone aggregates) as in sub base complete all as specified and directed. |
| 139 | M&L in repairs 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 140 | M&L for cutting and removing of bushes, small trees, vegetation (Peepal, bad small plants etc) of any ida and girth from roof projection, chajjas, wall junction, parapet etc at any height by necessary demolition of brick work, cment plaster, digging out roots from concrete or brick wall filling holes on building wall/roof/chhajja/water tank staging area etc and making good with cement mortar 1:4 complete all as specified and directed. |
| 141 | S&F in repairs GI Tank nipple of 20mm/15mm bore 150mm long suitable for PVC storage tank of capacity upto 1000 litre complete all as specified and directed. |
| 142 | S&F in repairs 15mm GI Socket/Elbow/Tee required against item No 1 above complete all as specirfied and directed. |
| 143 | S&F in repairs 20mm GI Socket/Elbow/Tee ISI marked required against item No 1 above complete all as specirfied and directed. |
| 144 | S&F of 15/20mm brass spindal suitable for wall mixer/wash hand basin mixer/CP Tap required against item no 1 above complete all as specified & directed. |
| 145 | S&F of brass leg piece connection suitable for wall/wash hand basin mixer required against item No1 above complete all as specified & directed. |
AI Tender Summary
Tender Timeline
Jun 17, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysJul 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender