Tender For Special Repair Of Building No P-06, Jcos /Or Living At No 01 Ps Sec, Ccib Under Ge Dehradun
Tender Value
77.62 Lakhs
Estimated cost
Bid Submission
15 Jul 2026
7 days left
EMD
1.41 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dehradun → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair Of Building No P-06, Jcos /Or Living At No 01 Ps Sec, Ccib Under Ge Dehradun
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 04-Jul-2026 | Corrigendum | BOQ | 15-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down shutter of any description, exc. 1 Sqm but n. exc. 2 Sqm each and removing from site complete all as specified & directed. |
| 2 | Taking down chowkhats or frames n. exc 1.5 sqm each without taking off shutter from the frame complete all as specified & directed. |
| 3 | All as per itme No 2 here in above but exc. 1.5 Sqm but not exceeding 4 Sqm each complete all as specified & directed. |
| 4 | M & L for 25 mm thick PCC 1:2:4 type B-0 using 12.50 mm graded stone aggregate as in leveling course to floors complete all as specified & directed . |
| 5 | S&F aluminium alloy powder coated door made out of hollow extruded aluminum section as mentioned below. Each door having 02 Nos Disc or D type handle, 02 Nos aluminum tower bolt 200mm size, one door closer,one brass mortice lock of six lever with key in duplicate regulated by double action hydraulic floor spring heavy duty (Make : Sandhu/Ritz ) shutter to be partly glaze with 5mm thick tined coloured glass in upper pannel and partly pannelled with 12 mm thick both side laminated particle board in lower pannel fixed with glazing clip, rubber beading/gasket, anodised aluminum beading screw, complete all as specified and directed at site. Chowkhat frame : 101.60x44.45x1.60mm, Shuter verticle style : 85x44.45x1.56mm, Shutter top rail and bottom rail : 114.30x44.45x1.55mm |
| 6 | S&F factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 7 | S&F in repair for powder coated aluminium ventilator fixed type half glazed and half gauged with and including hardware fitting, glazing, wire gauge, rubber packing, aluminium beading etc. as specified below including taking down old/ ventilator and making good of wall surface to match with existing surface complete all as specified and directed. aluminium section shall be of size as given below:Frame:- 44.5x44.5mmx 1.08mm thick, Top/ botton rails and middle / side styles of shutter - 44.5x 44.5 mm x 1.08 mm thick Including Glass: 5 mm thick frodted glass fixed with rubber gasket with aluminium beading, necessary aluminium beading,wire gauge incl aluminium gril with frame fixed to by means stainless steel screws . |
| 8 | S&F in repair for powder coated aluminium partion (fixed) made out of aluminium powder coated section 83x 44.45 x 2.00 mm including ACP sheet complete with rubber packing /aluminum beading etc including dismantling of existing structure complete all as specified and directed. |
| 9 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size given below comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified & directed. (Note: MS hold fast/lugs or SS dash fastener shall be paid separately) |
| 10 | Frame size 45 x 70 mm |
| 11 | Frame size 50 x 100 mm |
| 12 | Frame size 50 x 125 mm |
| 13 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge) minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws .Complete all as specified & directed.(Note: stainless steel butt hinges shall be paid separately) |
| 14 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws complete all as specified & directed.(Note: stainless steel butt hinges shall be paid separately) |
| 15 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type Glazed door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws complete all as specified & directed. (Note: stainless steel butt hinges shall be paid separately) |
| 16 | S&F Stainless steel, handle cast type 150mm long of extruded section complete all as specified & directed. |
| 17 | S&F Stainless steel barrel tower bolts 200mm long of extruded section complete all as specified & directed. |
| 18 | S&F Stainless steel sliding door bolt 300mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified & directed. |
| 19 | S&F Stainless steel Butt hinges 100mm size, medium weight, cold rolled mild steel complete all as specified & directed. |
| 20 | S&F 140mm long Floor door stopper of Stainless steel body & tongue, anodised, with hard drawn steel spring complete all as specified & directed. |
| 21 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4 mm complete all as specified and directed. |
| 22 | S&F mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 including necessary welding, drilling hole complete all as specified & directed. |
| 23 | S&F in repair factory made 100 % solid wood plastic composite (WPC) flush type shutter of 18mm thickness one side laminate consisting of panel of PVC profile of 18mm (+ 0.7mm) thick of density 600 kg per cum manufactured by ISO-9000 certified company using for shutter cilica ply 18mm thick and fixed with frame. The thickness of shutter is edges painted by matching colour of PVC lining of plain/prelim coloured PVC sheet using etc complete as per manufacture specification and as directed. |
| 24 | S & F continuous (Piano) hinges , mild steel, bright finished or stainless steel 304 grade, width of flaps (When open) 30 mm complete all as specified and ditected. |
| 25 | S&F magnet catcher for cub board with brass body and striking plate including letting complete all as specified and directed. |
| 26 | S&F stainless steel handle fency type 100 mm size for kitchen cabinet shutters complete all as specified and directed. |
| 27 | M&L non skid / mat finish ceramic coloured tiles of size 300x300x 6- 7 mm thick, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 15 mm thick screed bed in cement mortar 1:6 and including dismantling of existing floor tiling cement mortar bedding (but not backing) and rubbish off the premises complete all as specified & directed. |
| 28 | M&L glazed ceramic coloured tiles size 300x450x 6-7 mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match fixed over and including 10mm thick rendering in cement mortar 1:4 including dismantling of existing wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified & directed. |
| 29 | M&L for Vitrified Ceramic tiles Dark shed /double charged 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors, skirting etc. fixed over and including screed bed 15 mm thick in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile complete all as specified & directed. |
| 30 | Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified & directed. |
| 31 | M&L for Sand filling under flooring or in foundations including watering and consolidation complete all as specified and directed. |
| 32 | M & L for Hardcore of gauge not exc. 63 mm, deposited, spread and leveled in layers not exc. 50 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and directed. |
| 33 | M&L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundations, filling and mass-concrete complete all as specified & directed. |
| 34 | M&L for 100 mm thick PCC 1:2:4 type B-2 using 40 mm graded stone aggregate as in flooring, laid in alternate bays, surface finished even and smooth with using extra cement complete all as specified & directed . |
| 35 | M&L for 75mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection or similar work/places, laid in alternate bays and filling the joints with & including bitumen and sand 1:3 by weight, surface finished even and smooth without using extra cement complete all as specified & directed . |
| 36 | M&L for 18 to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and demolition of existing stone complete all as specified & directed. |
| 37 | S&F hollow PVC sheet wall panelling of thickness 5mm, consisting of panel having size 1220x2440 stuck on inner frame work of 50mm wide strips of 5mm thick PVC sheet. The strip shall have in their centre a groove of 6mm width and 1mm depth of sinking the head of the screw used to fixed the strip to the wall vertically at an equal interval of 250mm between two PVC strip. The PVC strip shall be fixed to wall using 65mm long MS screw & through the groove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200mm. A groove of 2mm may be left at the joint of two panel for astheic looks, the exact size of the panel and correspondingly the grid may vary depending on size of wall complete all as specified and directed. |
| 38 | Taking out interlocking paver blocks any shape or size and Re-laying the same after removeing all vegetation, algae, grass etc laid to proper slope and grandinte over sand cushioing complete all as specified and directed. NOTE : Sand, if required for correction and crushing level will be measured and paid sepertly. Replecement of broken paver block shall be paid sepertly as supply only. |
| 39 | Supply only machine made precast cement concrete blocks (interlocking paves) of 60mm thick with 6mm top layers of colour rubberised ante abrasive material laid over sand cushion complete all as specified & directed. |
| 40 | S&F in repair 25 mm dia stainless steel polished 304 grade drapery rod 1mm thick with final decorative, including brackets, decorative nobs at both ends as per approved sample complete all as specified and ditected. |
| 41 | Dismantling of Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings complete all as specified & directed. |
| 42 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering,ridge, cladding to wall, fixed with self tapping screws as specified having cap with rubber and metal washer complete all as specified and directed. |
| 43 | S&F Pre-painted galvalume aluminum zinc coating GI based crimped ridge with profile sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge , fixed with self tapping screws as specified having cap with rubber and metal washer . Complete all as specified and directed. |
| 44 | Dismantling of framed or unframed timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed |
| 45 | S&F roof truss (framed) trussed, purlins, crane gantries, rails and fastenings and heavy brackets framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified ta eg framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. conforming to Fe-410, Gde E-250 Quality-A complete all as specified and directed. |
| 46 | M & L applying two coats of synthetic enamel paint on new or previously untreated steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete all as specified and directed . |
| 47 | Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for reinforcement cut as required to facilitate demolition complete all as specified and directed. |
| 48 | M&L for RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in kitchen slab, slabs supported on walls, beams, roof bend, lintel beam, colums, in floors, roofs, landing balconies, canopies, deck slabs, chajja , cover slab and in shelves and the like complete all as specified and directed. |
| 49 | Use and waste for Formwork to sides and soffits of floor or roof beams, wall bend beam haunchings, girders, bressum-mers, lintels, cantilevers, slab, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed. |
| 50 | S&F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 51 | All as per Item No.47 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed . |
| 52 | S & F in repair of 20 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 53 | S & F in repair of 25 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified & directed. |
| 54 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as specified and directed . |
| 55 | S&F in repairs PVC connection 15 mm dia 450 mm long with brass fly nut at both ends complete all as specified and directed. |
| 56 | S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including cantilever brackets of suitable angle iron,CP brass waste coupling ,superior quality PVC waste pipe and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 57 | S & F in repairs, vitreous china wash down water closet pedestal pattern white (excluding flushing cistern and flush pipe) with CI ‘P’ or ‘S’ trap including plastic white sheet cover, CP jet spray with 1.0 metre long PVC pipe, connecting to stack pipe and to flushing pipe including making good to floor complete all as specified and directed. |
| 58 | S & F in repair vitreous china squatting pan “ORISSA PATERN” of size 580x440mm, white, with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor complete all as specified and directed. |
| 59 | S & F in repair 10 litre capacity PVC low level cistern ‘ white’ with inlet, float valve including brackets with 32 mm dia PVC pipe/bend 600 mm long complete. |
| 60 | S&F in repairs vitreous china wash down water closet pan (Padestal pattern) fancy type including fixing bolt, flushing cistern, Dual flush single piece EWC with soft close seat cover fittings 'P' or 'S' trap complete all as specified and dircted. |
| 61 | S&F in repair vitreous china Wash Basin counter Top 600x400x185mm including stainless steel bottle trap and 40 mm dia GI pipe up to Floor trap complete all as specified and directed. |
| 62 | S&F brass chromium plated ovehead fancy shower with shower arm complete all as specified and directed. |
| 63 | S&F in repair 15 mm bore Angle cock/stop valves, cast copper alloy, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 64 | S&F in repair 15mm bore Bib taps long body cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 65 | S&F in repair CP Health Faucet with 1.20 mtr metalic expandable tube & hook complete all as specified and directed. |
| 66 | S&F in repair CP grating 100mm to 125 dia round fix on floor/ nahani trap with hole/without fixed with cement mortar complete all as specified and directed. |
| 67 | S&F in repair CP Brass 3 in 1 hot & cold 15 mm dia wall mixer for mixing hot & cold water with telephonic shower provn with connecting legs & flanges complete all as specified and directed. |
| 68 | S&F in repair 15mm dia CP brass chromium plated Central hole basin mixer with accessories in wash basin for mixing hot and cold water, screwed down for 15mm bore GI pipe complete all as specified and directed. |
| 69 | S&F in repair 15mm dia CP brass chromium plated Sink mixer with accessories in sink for mixing hot and cold water, screwed down for 15mm bore GI pipe complete all as specified and directed. |
| 70 | S&F in repair looking mirror of size (450 X 600mm) mounted on decorative type PVC frame fixed to wooden plug with CP brackets and screw fixed complete all as specified and directed . |
| 71 | S&F 5mm thick Fancy type looking mirror fixed to wall with teakwood beading complete all as specified and directed. |
| 72 | S&F in repair 20mm dia brass chromium plated tubular towel rail 600mm long, Stainless Steel complete all as specified and directed. |
| 73 | S & F rotational moulded polyethylene water storage tanks of capacity 1000 litres tripple layer, white colour, (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 with 20 mm ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed including dismantling of existing unserviceable tank and removing from site complete all as specified and directed. |
| 74 | Providing & fixing false ceiling board tile Ivory painted Designer (High Pressure Steam cured) of 4mm thickness (as per IS : 14862) of size 595x595mm and any one of the design (Cascade or electra) in true horizental level, suspended on inter locking metal grid of hot dipped galvanised steel section (Galvanised @120 grms, both side inclusive and black painted groove on all T webs) consisting of main T runner with suitably spaced joints to get required length and 15x32mm made from 0.30mm thick sheet spaced at 1200mm c/c and croos 'T' of size 15x32mm made of 0.30mm sheet 1200mm long spaced between main \\"T\\" at 600 mm c/c to form a grid of 1200x600mm and secondary cross \\"T\\" of length 600mm and size 15x32 mm made of 0.30mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x22x0.40mm and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \\"T\\" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable rods of 3mm dia with galvanised Butterfly level clips, spaced at 1200mm c/c along main 'T', bottom exposed width of 15mm of all 'T'' sections of 3mm dia GI wire shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5mm width, including taking down existing ceiling of any type complete all as specified and directed. |
| 75 | Excavation in trenches not exceeding 1.50 metre wide and not exceeding 1.50 metre depth for foundation, manhole, laying of cable etc not exc 10 Sqm on plan and not exc 1.5 metre in depth including getting out in soft/loose soil complete all as specified and directed . |
| 76 | Returning, filling in including spreading, leveling watering and well ramming in layers not exceeding 25 centimetre in soft/loose soil complete all as specified and directed |
| 77 | Removing excavated surplus soil/material not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed . |
| 78 | S&F 150 mm Salt glazed stoneware drain pipes, grade ‘A’ including with packing under and haunching against the sides of pipes after they are laid and tested, PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in bed to drain pipes with excavation to existing depth for laying sewage line and getting out in any type of soil complete all as specified and directed |
| 79 | Demolition of Brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles . Complete all as specified & directed . |
| 80 | M&L brick work with sub class 'B' brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 stone masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified & directed. |
| 81 | All as per item No.77 above but except bricks complete all as specified and directed. (Old bricks obtained from demoltion shall be re-used) |
| 82 | M&L brick work with sub class 'B' brick straight or curved on plan to any radius built in cement mortar 1:4 as in half brick thick wall complete all as specified & directed. |
| 83 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. Complete all as specified & directed. |
| 84 | M & L for 15mm thick rendering on brick work or concrete surface in cement mortar 1:6, surface finished even and fair complete all as specified & directed. |
| 85 | M & L for 15mm thick rendering in cement mortar 1:4 on brick work or concrete surface, surface finished even and fair complete all as specified & directed. |
| 86 | M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified in SSR Part I and directed. |
| 87 | M&L for applying interior grade wall care putty 1mm thick to make the surface smooth complete all as specified and directed. |
| 88 | M&L for preparing of old plastered and unplastered surfaces of wall/ceiling and applying two coats of distemper oil emulsion complete all as specified & directed. Please Enable Macros to View BoQ information |
| 89 | M&L for preparing of old plastered and unplastered surfaces of wall/ceiling and applying two coats of distemper oil emulsion complete all as specified & directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 04, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 15, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 7 daysJul 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender