|
| 1 | M & L for dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and directed by Engineer-in-charge. |
| 2 | Demolition of cement concrete un -reinforced in ground floors and pavings n.exc 15cm thickness complete all as specified and directed by Engineer-in-charge. |
| 3 | M& L plain cement concrete 1:2:4 type by using 20mm graded stone agregate (25mm thick) as in flooring with water proofing compound @ 2% dosage (1kgs) in 50kg cement complete all as specified and directed by Engineer-in-charge. |
| 4 | Supply of SBR based waterproofing compound @ 2% dosage by weight of cement (1kgs) of 50kg cement used to be mixed in cement concrete as water proofing and hardening complete all as specified and directed by Engineer-in-charge. |
| 5 | M & L For applying Pitch Free PU based Liquid applied single component elastomeric seamless, water and vapor proof membrane system Nitoproof 600PF for concrete @ 2.50 kg/m2 (2 coats). Typical applications will include roofs, podiums, balconies, floor slabs, suspended floors, patios, bathrooms, inspection pits, swimming pools, bridge decks, Conforming Tensile Strength (2N/mm2 ) (ASTM D412) / Tear resistance (15 kN/m) (ASTM D624-00 and Crack bridging (ASTM C836 / ASTM C1305 modified) 2mm. After 72 hours of curing, flood test can be carried out to a minimum depth of 50mm of water for 24 hours. Drains shall be plugged and barriers placed to contain the water complete all as specified and directed by Engineer-in-charge. Note : All above operations to be done in presence of auth applicator in order all as specified and directed. |
| 6 | M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in epoxy grouing only including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed by Engineer-in-charge. Note : Work will be in patches or in bulk all as specified and directed |
| 7 | M&L for Coloured Glazed ceramic tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in epoxy grouting only to match & including 10 mm thick rendering in cement mortar (1:4) complete all as specified and directed by Engineer-in-charge. |
| 8 | M&L for special treatment to floor/ wall sunken portion with demolition of PCC with plaster of entire sunken area (bottom and sides) including removal of demolised material exc 500m and , prepration of surface by cleaning to removal loose particles, dust latance etc to bottom and sides including replacement of floor trap, and applying 10MM thick plaster in cm (1:4) with WPC liquid Conplast 421 and applying one coat each of nitoproof 100 priming coat @1 ltr/5Sqm, after the priming coat applying Nitoproof 120 on plastered surfaces @1Ltr/2.5 Sqm, filling the sunken floor with PCC (1:5:10) using brick bat and WPC Conplast 421 , rendring again 40 MM thick in CM(1:4) mixed with WPC conplast-421 area of floor for toilet/ bathroom upto 1.2 Sqm complete all as specified and directed by Engineer-in-charge. |
| 9 | M&L for special treatment to floor/ wall sunken portion with demolition of PCC with plaster of entire sunken area (bottom and sides) including removal of demolised material exc 500m and , prepration of surface by cleaning to removal loose particles, dust latance etc to bottom and sides including replacement of floor trap, and applying 10MM thick plaster in cm (1:4) with WPC liquid Conplast 421 and applying one coat each of nitoproof 100 priming coat @1 ltr/5Sqm, after the priming coat applying Nitoproof 120 on plastered surfaces @1Ltr/2.5 Sqm, filling the sunken floor with PCC (1:5:10) using brick bat and WPC Conplast 421 , rendring again 40 MM thick in CM(1:4) mixed with WPC conplast-421 area of kitchen upto 0.5 Sqm complete all as specified and directed by Engineer-in-charge. |
| 10 | Taking down cement plaster of any description, any thickness of walls/soffits etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed by Engineer-in-charge. |
| 11 | M&L for rendering 15 mm thick readymade plaster on inner/outer walls with approved make by adding 17-19% of potable water by weight of material. For thickness above 15 mm it is recommended to be applied in multiple layers. Ready-mix plaster shall complies with IS 1661-1972, IS 2250-1965, IS 2402-1963 and confirms the Compressive strength @ 28 Days- 10-12 Mpa/ Bulk density- 1500-1600 Kg/m3 complete all as specified and directed by Engineer-in-charge. Note :The rate quoted by contractor shall include cleaning of surface, application as per instruction and scaffolding upto 20mtr height. |
| 12 | M&L for rendering 10-15 mm thick Levelmaxx plus plaster on inner/outer walls/ceiling with JK Cement by adding 22-25% of potable water by weight of material. For thickness above 15 mm it is recommended to be applied in multiple layers. plaster shall complies with Compressive strength @ 28 Days- 10-12 Mpa/ Bulk density150Kg/Ltr complete all as specified and directed by Engineer-in-charge. Note :The rate quoted by contractor shall include cleaning of surface, application as per instruction and scaffolding upto 20mtr height. |
| 13 | M & L for prepariation of new plastered surfaces of walls complete all as specified and directed by Engineer-in-charge. |
| 14 | M & L for prepariation of new plastered surfaces of ceiling complete all as specified and directed by Engineer-in-charge. |
| 15 | M & L for Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed by Engineer-in-charge. |
| 16 | M&L applying two coats of cement based paint over a coat of alkali resistant paint complete all as specified and directed by Engineer-in-charge. |
| 17 | M&L for applying three coats of white wash on ceiling complete all as specified and directed by Engineer-in-charge. |
| 18 | M&L for applying three coats of white wash on wall complete all as specified and directed by Engineer-in-charge. |
| 19 | Supply & Fixing 15mm bore of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors specified. with all fittings such as brasss Tee, brass elbows, brass sockets, brass unions, plugs, short lenghts etc. and fixed complete to walls and ceilings or laid in floors concealed or open of any length including taking down or up existing GI tubing & connections complete all as specified and directed by Engineer-in-charge. |
| 20 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories complete all as specified and directed by Engineer-in-charge. |
| 21 | S & F PVC (SWR) 75 mm bore pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by Engineer-in-charge. |
| 22 | S & F PVC (SWR) 110 mm bore pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by Engineer-in-charge. |
| 23 | S & F PVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed by Engineer-in-charge. |
| 24 | S & F PVC (SWR) 110 mm bore pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed by Engineer-in-charge. |
| 25 | S & F PVC (SWR) 75mm bends any radius complete all as specified and directed by Engineer-in-charge. |
| 26 | S & F PVC (SWR) 110mm bends any radius complete all as specified and directed by Engineer-in-charge. |
| 27 | S & F PVC (SWR) multi floor trap 75 mm with grating including jointing with solvent cement complete all as specified and directed by Engineer-in-charge. |
| 28 | S&F Vitreous china premium/1st quality wash down water closet pan floor mounting (Semi-pedestal pattern (Anglo Indian) white colour including CI S/P trap as directed including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe PVC 32mm dia and incl. plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and including supply and fix of PVC long arm S/P trap so that joint is avoided inside the building as well as in wall and outlet straight away come out of wall in all floors G.F.and taking down existing of any description/size complete in all respect complete all as specified and directed by Engineer-in-charge. |
| 29 | Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed by Engineer-in-charge. |
| 30 | S & F solid PVC door frames of size 50x47mm made out of 5mm plain colour PVC sheet supplying and fixing in opening as per specification and drawing shown in SSR complete all as specified and directed by Engineer-in-charge. |
| 31 | S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification incl the fwg S & F :-(a) Stainless Steel (304 Grade) Finished Butt Hinges 125mm - 3 Nos per leaf(b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf(c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf |
| 32 | S & F in repair Vitreous china premium/1st quality wash basin (under/top counter), white, size 550x400 mm including S&F all accessories as recommended by manufacturer complete fixed in position in all respect as per manufacturer's instructions and all as specified including all Waste fittings, brass,chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed by Engineer-in-charge. Note : The items for counter will be measured and paid separately. |
| 33 | S&F in repair wash basins vitreous china, white /coloured flat back size 550 x400mm fixed including bracket complete all as specified and directed by Engineer-in-charge. |
| 34 | S & F in repair Vitreous china squatting pan of Orissa patten size 580 x 440 white colour including CI S/P trap long size as directed joint run and lead front or back inlet with integral footrest including connection to trap and to flushing pipe,anti-syphonage pipe, etc, fixed in repair complete and making good to floor in PCC 1:2:4 complete all as specified and directed by Engineer-in-charge. |
| 35 | S&F European type water closet including CI P/S trap as directed including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe PVC 32mm dia and incl. plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and including supply and fix of PVC long arm P/S trap so that joint is avoided inside the building as well as in wall and outlet straight away come out of wall in all floors G.F.and taking down existing of any description/size complete all as specified and directed by Engineer-in-charge. |
| 36 | S & F Vitreous china premium/1st quality wash down water closet floor mounting EWC (One piece) P trap white/ivory/off white including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe PVC 32mm dia and incl. plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, incl 100mm dia cast iron sanitary connections short connections pipe of length upto 600 mm and Cutting holes in or through walls, packing with PCC 1 : 2 :4 complete and taking down existing of any description/size complete in all respect complete all as specified and directed by Engineer-in-charge. |
| 37 | Supply and fixing in repair PVC Flexible waste pipe 32/40 mm dia having length 900mm with socket for steel sink/WHB/urinal upto floor level complete all as specified and directed by Engineer-in-charge. |
| 38 | M & L Granite (of any type) work (table rubbed and polished) for wall lining / partition b/w urinals and for counter wash basin 12mm thick in cement mortar (1:3) and pointing / fixing with epoxy grouting only using marble dust with admixture of pigment to match with shade of granite including cleaning of damaged granite and fix with epoxy grouting only complete all as specified and directed by Engineer-in-charge. |
| 39 | S & F PVC (SWR) branch piece 75mm, single (single Y) equal or unequal with access door complete all as specified and directed by Engineer-in-charge. |
| 40 | S & F PVC (SWR) branch piece 110mm, single (single Y) equal or unequal with access door complete all as specified and directed by Engineer-in-charge. |
| 41 | S & F in repair stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays for fixing 75mm dia PVC pipe, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed by Engineer-in-charge. |
| 42 | S & F in repair stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays for fixing 110mm dia PVC pipe, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed by Engineer-in-charge. |
| 43 | S & F PVC (SWR) vent cowl 75 mm dia complete all as specified and directed by Engineer-in-charge. |
| 44 | S & F PVC (SWR) vent cowl 110 mm dia complete all as specified and directed by Engineer-in-charge. |
| 45 | S & F in repair brass chromium plated Health faucet with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed by Engineer-in-charge. |
| 46 | Supply and fixing in repair of fancy type pillar taps cast copper alloy with capstan heads, chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shank supply and fixing ly nuts for iron pipe of 15mm bore fancy type complete all as specified and directed by Engineer-in-charge. |
| 47 | S & F in repair Bib taps, CP, fency type long nose with wall flange screwed for 15mm bore of iron pipe or for brass ferrule and fixed in position complete fixed as in repair in all respect all as specified. |
| 48 | S&F in repairs 15mm dia two way angle cock of brass, chromium plated fancy type glossy finish fixed in repairs complete all as specified and directed. |
| 49 | Supply & Fixing in repair chromium plated shower rose 125mm round shape fancy type fixed to 15mm bore pipe all as specified and directed by Engr-in-charge. |
| 50 | S & F in repair Toilet paper holder with flat recessed type stainless steel Coomplete all as specified and directed. |
| 51 | S & F in repair Angular Stop Cock, CP, fency type with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed ends for 15mm bore of iron pipe or for union and fixed in position complete fixed as in repair in all respect all as specified. |
| 52 | S&F in repairs 15mm bore Brass CP basin mixer for mixing hot & Cold water screwed down for iron pipe complete all as directed by Engineer in charge. |
| 53 | Supply & Fixing in repair Brass CP wall Mixer 3 in 1 System with provision for overhead and hand shower suitable 15mm bore of pipe complete all as specified and directed. |
| 54 | Note :- (i) The water proofing treatment shall be applied by the company’s authorized applicator only. (ii) Contractor have to get prior approval of applicator or authorized agency by submitting its authorization letter to this office for approval prior to commencement of work. (iii) Submission of 3 year warranty certificate for waterproofing treatment work for leekage / seepage is mandatory after completion of work. (iv) The cost of Scaffolding work required at certain places is including in the respective items catered for repairs itself. No extra shall be paid for the same. Please Enable Macros to View BoQ information |
