|
| 1 | M&L for taking out submersible pumping set 41 HP capacity of any make from bore well (60 mtr deep) connected with 7/6 stage column pipes and transporting the same to civil work shop, dismantling of pump and motor and checking out all electrical and mechanical parts for identification of fault/ defective parts etc, re-assembling the pump motor set after carrying out necessary repairs, transporting back to original location and installed complete at site including necessary electrical and water connections, testing & commissioning complete all as specified and as directed by Engineer-in-Charge. |
| 2 | All as per Item No. 1.00 here-in-before but pumping set of 25 HP capacity all as specified. |
| 3 | All as per Item No. 1.00 here-in-before but pumping set of 10 HP / 12.5 HP capacity all as specified. (Note for item No. 1, 2 & 3 : Repair / replacement of various parts of pump, rewinding of motor etc shall be measured & paid separately based on fault / test report and as directed by Engineer-in-Charge) |
| 4 | M&L for taking out submersible pumping set 0.5 / 2 HP capacity of any make from bore well (30 mtr deep) connected with 3 stage column pipes and transporting the same to civil work shop, dismantling of pump and motor and checking out all electrical and mechanical parts for identification of fault / defective parts etc, re-assembling the pump motor set after carrying out necessary repairs, transporting back to original location and installed complete at site including necessary electrical and water connections, testing & commissioning complete all as specified and as directed by Engineer-in-Charge.(Note: Repair / replacement of various parts of pump, rewinding of motor etc shall be measured & paid separately based on fault / test report and as directed by Engineer-in-Charge) |
| 5 | Supply only for replacement of stainless steel impeller suitable for submersible pump set 41 HP capacity of any make complete all as specified. |
| 6 | Supply only for replacement of stainless steel impeller suitable for submersible pump set 25 HP capacity of any make complete all as specified. |
| 7 | Supply only for replacement of stainless steel impeller suitable for submersible pump set 10 / 12.5 HP capacity of any make complete all as specified. |
| 8 | Supply only for replacement of stainless steel impeller suitable for submersible pump set 0.5/ 2 HP capacity of any make complete all as specified. |
| 9 | Supply only for replacement of coupling sleeve stainless steel suitable for submersible pump set 41 HP capacity of any make complete all as specified. |
| 10 | Supply only for replacement of coupling sleeve stainless steel suitable for submersible pump set 25 HP capacity of any make complete all as specified. |
| 11 | Supply only for replacement of coupling sleeve stainless steel suitable for submersible pump set 10 / 12.5 HP capacity of any make complete all as specified. |
| 12 | Supply only for replacement of coupling sleeve stainless steel suitable for submersible pump set 0.5 / 2HP capacity of any make complete all as specified. |
| 13 | Supply only for replacement of stainless steel stud with nut suitable for submersible pump set 41 HP capacity of any make complete all as specified and as directed. |
| 14 | All as per Item No. 13 here-in-before but for 25 HP capacity all as specified. |
| 15 | All as per Item No. 13 here-in-before but for 10 / 12.5 HP capacity all as specified. |
| 16 | All as per Item No. 13 here-in-before but for 0.5 / 2 HP capacity all as specified. |
| 17 | Supply only for replacement of thrust plate with bearing suitable for submersible pump set 41 HP capacity of any make complete all as specified. |
| 18 | All as per Item No. 17 here-in-before but for 25 HP capacity all as specified. |
| 19 | All as per Item No. 17 here-in-before but for 10 / 12.5 HP capacity all as specified. |
| 20 | All as per Item No. 17 here-in-before but for 0.5 / 2 HP capacity all as specified. |
| 21 | Supply only for replacement of bush GM suitable for submersible pump set 41 HP capacity of any make complete all as specified. |
| 22 | All as per Item No. 21 here-in-before but for 25 HP capacity all as specified. |
| 23 | All as per Item No. 21 here-in-before but for 10 / 12.5 HP capacity all as specified. |
| 24 | All as per Item No. 21 here-in-before but for 0.5 / 2 HP capacity all as specified. |
| 25 | Supply only for replacement of bush rubber suitable for submersible pump set 41 HP capacity of any make complete all as specified. |
| 26 | All as per Item No. 25 here-in-before but for 25 HP capacity all as specified. |
| 27 | All as per Item No. 25 here-in-before but for 10 / 12.5 HP capacity all as specified. |
| 28 | All as per Item No. 25 here-in-before but for 0.5 / 2 HP capacity all as specified. |
| 29 | Supply only for replacement of GM neck ring suitable for submersible pump set 41 HP capacity of any make complete all as specified. |
| 30 | All as per Item No. 29 here-in-before but for 25 HP capacity all as specified. |
| 31 | All as per Item No. 29 here-in-before but for 10 / 12.5 HP capacity all as specified. |
| 32 | M&L for rewinding of submersible pump set motor 41 HP capacity of any make by taking out rotor, taking out burnt stator winding, cleaning the stator and rewinding the motor with appropriate gauge, weight and turns of super enameled copper wire using proper insulating material, varnishing with class-I varnish, heating/ baking etc complete all as specified and directed by Engineer-in-Charge. |
| 33 | All as per Item No. 32 here-in-before but for 25 HP capacity complete all as specified. |
| 34 | All as per Item No. 32 here-in-before but for 10 / 12.5 HP capacity complete all as specified. |
| 35 | All as per Item No. 32 here-in-before but for 0.5 / 2 HP capacity complete all as specified. |
| 36 | M&L for taking out defective block / mono block pumping set for 60 HP capacity by dismantling from suction and discharge pipe line and existing motor shaft, transporting to civil workshop for cleaning, scraping, painting, machine repair work, and necessary overhauling, replacement of worn out and defective part including machining, threading, tapping all as required to bring the pump in perfect working condition and transporting back the same to its original location, re-assembling installation, commissioning and testing complete all as specified and directed by Engineer-in Charge. |
| 37 | All as per Item No. 36 here-in-before but for 15 HP capacity complete all as specified. |
| 38 | All as per Item No. 36 here-in-before but for 7.5 HP capacity complete all as specified. |
| 39 | All as per Item No. 36 here-in-before but for 0.5/ 3 HP capacity complete all as specified.(Note for item No. 36, 37, 38 & 39 : (i) Spare parts of pumping set shall be measured & paid separately as supply only based on faults/ test report and as directed by Eng-in-charge. (ii) Rewinding of defective motor shall be measured & paid separately. |
| 40 | M&L for rewinding of defective Booster/ mono-block motor set of 60 HP capacity of any make, replacement of worm out parts/ burn out winding. Rewinding with same gauge of existing wire complete and re-fitting the motor complete all as specified and directed by Eng-in-Charge. |
| 41 | All as per Item No. 40 here-in-before but for 15 HP capacity complete all as specified. |
| 42 | All as per Item No. 40 here-in-before but for 7.5 HP capacity complete all as specified. Please Enable Macros to View BoQ information |
| 43 | All as per Item No. 40 here-in-before but for 7.5 HP capacity complete all as specified. Please Enable Macros to View BoQ information |
