|
| 1 | Demolition of RCC of any description and in any position not other wise specially provided for reinforcement cut as required to facilitate demolition complete all as specified and directed. |
| 2 | M&L for pre cast cement concrete 1:1.5:3, type A-1, using 20mm graded stone aggregate as in cover slabs (for manholes etc) and similar articles with plain faces, set in CM 1:4 complete all as specified and directed. |
| 3 | M&L for Mild Steel TMT bar 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 4 | Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 5 | M&L Random rubble masonry walling well bonded, bedded, solidly hearted, uncoursed built in CM 1:6.Complete all as specified and directed. |
| 6 | M&L Brick work using fly ash bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 7 | S&F pre- painted galvalume aluminum zinc corrugated steel based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping serews as specified and directed by Engr - in - Charge. |
| 8 | Dismantling asbestos cement (corrugated, semi corrugated etc) sheets in roof coverings including ridges complete all as specified and directed. |
| 9 | M&L for Fe 410-W (Gde E-250 quality A) Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed. |
| 10 | M&L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed. |
| 11 | Excavating in post holes (or similar holes) each n.exc 0.5 cum getting out making good the disturbed surface if required in soft/ loose soil complete all as specified and directed. |
| 12 | M&L for PCC 1:3:6 Type C-2 using 40 mm graded stone aggregate in foundation filling and mass concrete all as specified and directed. |
| 13 | Demolition of Cement Concrete (unreinforced) of any description & in any position not otherwise specifically provided for. Complete all as specified & directed. |
| 14 | M&L for Fe 410-W (Gde E-250 quality A) Framed work as in doors or gates of angle or other section with gusset plates,rails,braces etc complete,drilled for fixing of steel sheeting or other covering. Doors,etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening anf fixing complete all as specified and directed. |
| 15 | Dismantling wrought iron or mild steel work of any description not otherwise provided for. |
| 16 | M&L for two coats synthetic enamelled paint to new steel surfaces after preparation over a coat of red oxide primer area over exc 10cm in width or girth etc all as specified and directed by Engr - in - Charge. |
| 17 | M&L preparation of new steel surfaces of any description n exc 10cm in width or girth and priming with red oxide zinc chrome and applying two coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge |
| 18 | S&F machine pressed precast concrete interlocking paver block any shape & size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement & pigment complete all as specified & directed. |
| 19 | M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 20 | M&L for 100 mm thick cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as sub base of floor complete all as specified and directed. |
| 21 | M&L for hard core of gauge n exc 63 mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface all as specified and directed. |
| 22 | M&L for cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in path/ hard standing surface finished even and fair complete all as specified and directed. |
| 23 | M&L 75 mm thick cement concrete 1:3:6 type C2 using 40 mm graded stone aggregate as in sub base,floor , plinth protection etc and finishing cement concrete even and fair specified and directed by Engr - in - Charge. |
| 24 | M&L Excavating over areas, n exc 1.5 m deep and getting out in soft/ loose soil complete all as specified and directed. |
| 25 | M&L for 10 mm thick heavy duty exterior designer tiles of size 300 mm x 300 mm as in floor set, jointed in neat cement slurry and pointed with grey cement and pigment complete all as specified and directed. |
| 26 | M&L for screed bed or bedding layer of mortar 15 mm thick in CM 1:4 for laying floor finishes complete all as specified and directed. |
| 27 | M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub base flooring average 25 mm thick surface finished even and rough (as in levelling course) to receive the topping layer complete all as specified and directed. |
| 28 | Dismantling floor, hearth or wall tiling including cement mortar bedding etc (but not backing) and removing rubbish off the premises complete all as specified and directed. |
| 29 | M & L for 15mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes finished even and rough complete all as specified and directed. |
| 30 | M&L for Pre painted Chequered cement concrete tiles 20cm x 20cm x 25mm thick with grey cement and pigment set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile as in floor complete all as specified and directed. |
| 31 | S&F in repairs 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed |
| 32 | S&F in repairs 110mm bore PVC (SWR) bends any radius complete all as specified and as directed |
| 33 | M&L for finishing cement concrete even and smooth using extra cement complete all as specified and directed. |
| 34 | M&L for Cleaning and removing all scale and dirt, etc, from RCC/PVC tanks exc 250 ltr n.exc 500 ltr capacity incl washing of water tank with the use of Tank cleaning motor jet pressure machine and using bleaching powder @ 0.25 Kgs per tank with writing the date of cleaning with any type of paint and from mouths of circulating pipes, including disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed. |
| 35 | M&L for Cleaning and removing all scale and dirt, etc, from RCC/PVC tanks exc 500 ltr n.exc 1000 ltr capacity incl washing of water tank with the use of Tank cleaning motor jet pressure machine and using with bleaching powder @ 0.50 Kgs per tank with writing the date of cleaning with any type of paint and from mouths of circulating pipes, including disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed. |
| 36 | S&F in repairs ball valves for 20 mm bore dia of pipe high pressure of PTMT with Epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 210 gms) complete all as specified and directed. |
| 37 | S&F in repairs ball valves for 25 mm bore dia of pipe high pressure of PTMT with Epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 455 gms) complete all as specified and directed. |
| 38 | Taking down cement plaster on brick or concrete surface including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 39 | M&L for preparing new plastered surfaces of walls and applying three coats of white wash complete all as specified and directed |
| 40 | M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of cement based paint over a coat of primer complete all as specified and directed. |
| 41 | Dismantling posts or sturts (wood,steel or RCC) any section incl taking out embedded portion and making good disturbed ground etc all as specified and directed. |
| 42 | Dismantling fencing wire mesh any type etc all as specified and directed. |
| 43 | S&F Angle iron posts and rails,drilled and struts in fencing including cutting tops to shape as directed, driiling holes, notching for wire, etc, flat iron fillets (for secruing wire mesh etc) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-290 Gde E-165. |
| 44 | Mild Screw bolts (Machine made) with hexagonal or square head at one ends and to fitted with washers and one hexagonal or square n.exc 15cm long, dia of neck 11 to 15mm all as specified and directed by Engr-in-Charge. |
| 45 | Fixing only chain link fencing including line wire, any mesh, any size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed. |
| 46 | Supply only PVC coated chain link of 3.16mm dia mild steel galvanised fencing of mesh size 75 mmx 75mm as per IS : 2721-2003 weight n exc 4.00 kg per sqm complete all as specified and directed by Engr - in - Charge. |
| 47 | S&F mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conforming to Fe-410-W (Gde E-250) quality-A or Fe-290 (Gde-E-165) complete all as specified & directed. |
| 48 | M&L for writing letters or figures (Block, Roman, Italic or Indian) n.exc 30 cm high etc complete all as specified and as directed by Engineer-in-Charge. (Note : Rates to be deemed fit for all security measures while working in heights more than 6m from GL). |
| 49 | M&L preparation of old painted surfaces and applying one coat of cement based on walls complete all as directed by Engineer-in-Charge |
| 50 | M & L for two coats of cement based paint over a coat of primer on new plastered surface of walls including preparation of surface complete all as specified and directed by Engr-in-Charge/GE. |
| 51 | M&L applying two coats of acrylic exterior weather proof emulsion paint over a coat of exterior primer on newly plastered wall surfaces/ old decorated wall surfaces, in case of old decorated wall surfaces includes complete removal of existing wall finish of any type with wire brush, brooming, dusting & finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc complete all as specified and directed by Engr-in-Charge/GE. |
| 52 | Comprehensive maintenance and repairs of Mechanical laundry consisting of following items (Spares/items mentioned herein after shall be paid seperately. Cost of any other spares not included in items herein after shall be borne by the contractor):- Items covered for preventive and breakdown maintenance are:- (i) Industrial Water Extractor Model NXS15 – 1 No.(ii) Industrial Water Extractor ModelNXS30 – 2 Nos(iii) Industrial Drying Tumbler Model DRS 30- 1 No.(iv) Flat bed Drying Press Model FPS150(v) Air compressor – 1 No.Note :- maintenance will be carried out by OEM in every quarter |
| 53 | Supply and fix in repair for hose pipe for drain straight 3\\" for AXE 15 complete |
| 54 | Supply and fix in repair for over flow pipe 1.25\\" for AXE 15 complete |
| 55 | Supply and fix in repair for drain L shape 3\\" for AXE 15 complete |
| 56 | Supply and fix in repair for hose pipe for drain straight 3\\" for AXE 30 complete |
| 57 | Supply and fix in repair for control relay for AXE 30 complete |
| 58 | Supply and fix in repair for relay with base for AXE 30 complete |
| 59 | Supply and fix in repair for electric heater for AXE 30 complete |
| 60 | Supply and fix in repair for V belt B 98r for AXE 30 complete |
| 61 | Supply and fix in repair for door lock electromagnetic for AXE 30 complete |
| 62 | Supply and fix in repair for heater for DRE 30 complete |
| 63 | Supply and fix in repair for forward reversing timer for DRE 30 complete |
| 64 | Supply and fix in repair for V belt A 87 for DRE 30 complete |
| 65 | Supply and fix in repair for V belt B 65 for DRE 30 complete |
| 66 | Supply and fix in repair for hose clamp for DRE 30 complete |
| 67 | Supply and fix in repair of solenoid cut off switch complete as specified and as directed |
| 68 | Supply and fix in repair of push button start stop type complete as specified and as directed |
| 69 | Supply and fix in repair of Coil with core drain valve and as per existing sample complete as specified and as directed. |
| 70 | Supply and fix in repair of Checking and thoroughly cleaning of steam supply MS Pipe line to all equipments connection and point complete all as specified and as directed.Note: overhauling asbestos rope and aluminium foil paper etc. Are included in the unit rate quoted. |
| 71 | Supply and fix in repair of steam line control valve as per existing sample complete all as specified and as directed. |
| 72 | M&L for cleaning of Air compressor Machine air line and air storage tank as per existing sample complete all as specified and as directed. |
| 73 | Supply and fix in repair of pressure release valve per existing sample complete all as specified and as directed. |
| 74 | Supply and fix in repair of double function type bearing for washer extractor or drying tumbler of capacity of 30 Kgs including all fitting and fixture washer nut,bolts complete all as specified and as directed |
| 75 | Supply and fix in repair Vibrator bush as per existing sample complete all as specified and as directed |
| 76 | Supply and fix in repair of Ball Cock 15MM complete all as specified and as directed |
| 77 | Comprehensive maintenance and repairs of electrically operated overhead travelling cranes (EOT) consisting of main girder, cross travel, hoist crab, carriage, long travel drive mechanism, long and cross travel wheel pinions, bearings, rope drum, gear boxes, motors, wire rope, limit switches, overload and time delay relays/resistors, bottom control panels, contactors 3 pole, pendant push button suspension mechanism, etc complete of the following capacities (Spares/items mentioned herein after shall be paid seperately. Cost of any other spares not included in items herein after shall be borne by the contractor):- ( a) EOT Crane 1 Ton to 15 Ton Capacity |
| 78 | Rewinding of 3 phase 415 Volts electric motor of main hoist, creep hoist, long traverse and cross traverse of following capacity with super enamelled copper conductor of gauge as per the existing for the following:- (a) Electric motor above 1 HP but upto and including 5 HP. |
| 79 | Supply and Fixing only following spares of EOT cranes (a) MCB SPN 6 to 32 Amps, 240V |
| 80 | (b) All as per item no 79 but for MCB triple pole 16 to 32 Amps, 240V |
| 81 | (c)All as per item no 79 but for MCB triple pole and neutral 32 to 63 Amps, 240 V |
| 82 | (d) All as per item no 79 but for contactors 4 pole 25 Amps, 3Ph, 415V |
| 83 | (e) All as per item no 79 but for contactors 4 pole 32 Amps, 3Ph, 415V, |
| 84 | (f) All as per item no 79 but for contactors 3 pole 40 Amps, 3Ph, 415V, |
| 85 | (g) All as per item no 79 but for contactors 3 pole 70 Amps, 3Ph, 415V, |
| 86 | (h) All as per item no 79 but for overload relay 16 to 44 Amps, 415 V, |
| 87 | (i) All as per item no 79 but for overload relay 4-11 Amps, 415 V, |
| 88 | (j) All as per item no 79 but for overload relay 0 to 4 Amps, 415 V, |
| 89 | (k) All as per item no 79 but for Illumanated push button switch LED type with remote and accessories |
| 90 | (l) All as per item no 79 but for Cable PVC insulated sheathed with copper conductor of size 4Core 2.5Sqmm with metal hose covered |
| 91 | (m) All as per item no 79 but for Cable PVC insulated sheathed with copper conductor of size 4Core 1.5Sqmm with metal hose covered |
| 92 | (n) All as per item no 79 but for Cable PVC insulated sheathed with copper conductor of size1.5 sqmm 16 core |
| 93 | (o) All as per item no 79 but for Ball bearing of Size 6208/6209. |
| 94 | (p) All as per item no 79 but for Topping up of Gear box oil 90 Grade Servo in sealed containers. |
| 95 | (q) All as per item no 79 but for Brake Unit for 100 mm dia for EOT/HOT cranes. |
| 96 | (r) All as per item no 79 but for Brake Unit for 150 mm dia for EOT/HOT cranes. |
| 97 | (s) All as per item no 79 but for Limit switch 6A roller/lever type for EOT cranes |
| 98 | (t)All as per item no 79 but for MCB TPN 63 Amps, 415 Volts |
| 99 | (u)All as per item no 79 but for MCB TPN 40 Amps , 415 Volts |
| 100 | (v) All as per item no 79 but for MCB SPN 32 Amps , 415 Volts |
| 101 | (w) All as per item no 79 but for MCB SPN 16 Amps , 415 Volts |
| 102 | (x) MCB SP 6 Amps , 415 Volts |
| 103 | (y) All as per item no 79 but for Steel Wirerope 16 Sqmm as per existing complete |
| 104 | (z) All as per item no 79 but for Steel Wirerope 12 Sqmm as per existing complete |
| 105 | (ad) All as per item no 79 but for Steel Wirerope 10 Sqmm as per existing complete |
| 106 | (ae) All as per item no 79 but for Copper wire 1.5 Sqmm 10 core complete |
| 107 | (af) All as per item no 79 but for Step down transformer 415-110V AC |
| 108 | (ag) All as per item no 79 but for Step down transformer 415-150 Volts AC |
| 109 | Carry out load and deflection test for each EOT crane from 1 to 15 TON capacity upto 125% full load with necessary instruments on hoisting, LT/CT for checking the performance of the cranes as directed by the engineer In Charge/and upto the users safisfaction.Note: (i) Load/deflection test is to be carried out by the Govt authorized inspector to carry out test in the relevant field in presence of the department rep and recording the test and issue necessary certificate.(ii) The load required for the testing and necessary transportation, will be arranged by the contractor at the location of testing as per ground requirement. |
| 110 | Painting of EOT crane complete with double girder by scraping the old surface and Rust applying one coat of primer with two coat of emulsion paint as per existing colour as per direction of Engr-in-Charge complete all as specified and directed |
| 111 | M&L for repair and maintence of lift 15 passenger and 1320 kg with repair of mechanical parts and attending day to day breakdown complaints/ emergency breakdown compalint after receiving phone from JE concerned. Testing of lift to be carried out every month by KONE company representative and test report in this regards to be submitted by contractor till the completion of his contract. |
| 112 | Supply and fix & Taking down old unsv centrifugal Blower Fan AC Centrifugal Fan forward curved,137x143x113mm round, 230v AC 180m/h IP44 with galvanised steel/ sheet impellers housing , low noise level suitable for cabin environment , high static pressure as per direction of Engr- in- Charge Complete all as Specified and directed. |
| 113 | M&L for in repairs maintenance free battries for lift type EP 12-12, capacity 12V 12 Ah valve regulated lead acid, Absorbent glass matting (AGM ) battery complete all as specified and directed complete. Note :- Battery should be suitable to be fixed with the existing arrangement. |
| 114 | S&F in repairs PVC insulated and FR PVC round sheathed copper conductor(flexible), 1100 volts, conforming to IS 694 of size 1.0 Sqmm 3 core complete all as specified and directed |
| 115 | Supply and fix and taking down old unsv operating computer ST-9 for NXS-15 for mechanical laundry Engr- in- Charge Complete all as Specified and directed. Please Enable Macros to View BoQ information |
