|
| 1 | Bin Linen Multipurpose (FD/E6/MAP/09)Cabinet box complete with vertical and horizental partitions made of 18 mm thick BWP grade plywood (Make: Green Gold from Greenply/Gold from Archidply/ Bond 710 from Century ply)) over which pasting of sunmica 0.80mm (Make: Greenply/Archidply/Century ply) of shade approved by EIC/GE with suitable adhesive on one side and deco paint to be applied two coats on other side all as directed by GE/EIC and as per drg. Back ply shall be 12 mm BWR grade as per drg.Common Notes for : Repair of under mentioned furniture items will be carried out as follows (Sl No 1.01 to 18.02):-(a) Removal of existing unserviceable material carefully without disturbing the adjoining parts from furniture articles as mentioned in the schedule.Supply and fixing new parts as per given specification and drg after tightening the joints, pinning, screwing, nailing, wedging, glueing,providing hinges, placing every part in-tact including polishing/painting the entire article with standard workmanship and as directed by GE/Engr-in-Charge.All furniture items is to be painted /poilshed only after making the entire item intact by tightening the joints. (Sl No 1.01 to 18.02)(b) Work will be executed where the furniture exist in different User Units/Md accns of GE (Air Force ) Bamrauli including BSO's Furniture Yard as directed by Engineer-in-Charge (Sl No 1.01 to 18.02):-(c) All Timber shall be of 1st class seasoned hard teak wood (MP teak ) free from knots and cracks else specified in drg. (Sl No 1.01 to 18.02).(d) Anti-termite and anti-bug treatment shall be done before polishing the wooden items. (Sl No 1.01 to 18.02)(e) M&L for melamine polish high gloss/mate finish with spray machine applying shellac,wood filler,shelar etc after removing of complete existing polish making surfae smooth by sand paper (Emery paper) with standard workmanship as directed by EIC to the following furniture articles of MES pattern viz F/DB/FD/MAP series/TP or Similar items incl applying wax for depressed surface as well as washing with caustic soda wherever required before polishing all as specified and all as directed by Engineer-in-Charge. Shade of polishing/pinting will be directed by GE/Engr-in-Charge. Note: All material will be used to execute the work should be supplied by contractor in full no peacemeal material will be execpted. There should be atleast one day gap in each step during polishing.(Sl No 1.01 to 18.02 except Sl No 11.00 to 11.06 ) ). |
| 2 | Cabinet door made out of 18 mm thick BWP grade plywood (Make: Green Gold from Greenply/Gold from Archidply/ Bond 710 from Century ply)) over which pasting of sunmica 0.80mm ( Make: Greenply/Archidply/Century ply) of shade approved by EIC/GE with suitable adhesive for both sides all as directed by GE/EIC and drg. SS Piano higes shall be used for fixing. Lock (Make: Hettich/Ebco/Quba/Klazovyn) and CP Handle 4\\" (Make: Hettich/Ebco/Quba/Klazovyn) be provided in Cabinet all as directed by GE/EIC and as per drg. |
| 3 | Drawer made of 18 mm thick BWP grade plywood over which pasting of sunmica 0.80mm of approved shade by EIC/GE with suitable adhesive as approved by EIC/GE in front, sides shall be of 1st class teak wood and bottom of drawer shall be 9 mm thick BWP Plywood complete. Telescopic channel (Make: Hettich/Ebco/Quba/Klazovyn) and CP Handle 4\\" (Make: Hettich/Ebco/Quba/Klazovyn) be provided in Drawers all as directed by GE/EIC and as per drg. Duco paint to be applied two coats in all surfaces except front of drawers. |
| 4 | Base Frame structure to be made complete with 25mm dia PVC shoe all as specified and as per drg. |
| 5 | Fancy Knob SS CP as per sample held in yard. |
| 6 | Teapoy (FD-278, 34)(a) Top 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Action Tesa/Century Ply/Archid ply) duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 1.6 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg. |
| 7 | b) Legs as per drg. |
| 8 | c) Top rail/stiffener as per drg |
| 9 | d) Bottom rail as per drg. |
| 10 | e) Top short rail to be provided irrespective of drg. |
| 11 | f) Stiffener between bottom rail to be provided irrespective of drg. |
| 12 | g) Wooden corners to be provided all as directed by EIC/GE irrespective of drg. |
| 13 | Side Board (FD-241)Cabinet box complete with vertical and horizental partitions made of 18 mm thick BWP grade plywood (Make: Green Gold from Greenply/Gold from Archidply/ Bond 710 from Century ply)) over which pasting of sunmica 0.80mm (Make: Greenply/Archidply/Century ply) of shade approved by EIC/GE with suitable adhesive on one side and deco paint to be applied two coats on other side all as directed by GE/EIC and as per drg. Back ply shall be 12 mm BWP grade as per drg. |
| 14 | Cabinet door made out of 18 mm thick BWP grade plywood (Make: Green Gold from Greenply/Gold from Archidply/ Bond 710 from Century ply)) over which pasting of sunmica 0.80mm ( Make: Greenply/Archidply/Century ply) of shade approved by EIC/GE with suitable adhesive for both sides all as directed by GE/EIC and drg. SS Piano higes shall be used for fixing. Lock (Make: Hettich/Ebco/Quba/Klazovyn) and CP Handle 4\\" (Make: Hettich/Ebco/Quba/Klazovyn) be provided in Cabinet all as directed by GE/EIC and as per drg. |
| 15 | Drawer made of 18 mm thick BWP grade plywood over which pasting of sunmica 0.80mm of approved shade by EIC/GE with suitable adhesive as approved by EIC/GE in front, sides shall be of 1st class teak wood and bottom of drawer shall be 9 mm thick BWP Plywood complete. Telescopic channel (Make: Hettich/Ebco/Quba/Klazovyn) and CP Handle 4\\" (Make: Hettich/Ebco/Quba/Klazovyn) be provided in Drawers all as directed by GE/EIC and as per drg. Duco paint to be applied two coats in all surfaces except front of drawers. |
| 16 | Base Frame structure to be made complete with 25mm dia PVC shoeall as specified and as per drg. |
| 17 | Table Centre (FD-274)(a) Top 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Action Tesa/Century Ply/Archid ply duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 1.6 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg. |
| 18 | (b) Legs as per drg. |
| 19 | c) Top rail/stiffener as per drg |
| 20 | d) Bottom rail as per drg. |
| 21 | e) Top short rail to be provided irrespective of drg. |
| 22 | f) Stiffener between bottom rail to be provided irrespective of drg. |
| 23 | g) Wooden corners to be provided all as directed by EIC/GE irrespective of drg. |
| 24 | Peg Table (FD-277)(a) Top 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Action Tesa/Century Ply/Archid ply duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 1.6 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg. |
| 25 | Legs as per drg. |
| 26 | Top rail/Bottom Rail rail as per drg irrespective of drg. |
| 27 | Top short rail to be provided irrespective of drg. |
| 28 | stiffener between bottom rail to be provided irrespective of drg. |
| 29 | Table Dressing Ladies (FD/E6/MAP/07)Cabinet box with partitions with 18 mm thick BWP grade plywood ( Make: Green Gold from Greenply/Gold from Archidply/ Bond 710 from Century ply)) over which pasting of sunmica 0.80mm ( Make: Greenply/Archidply/Century ply) of shade approved by EIC/GE with suitable adhesive on one side and duco paint to be applied two coats on other side all as directed by GE/EIC and as per drg. Back ply shall be 12 mm BWP grade as per drg. |
| 30 | Drawer made of 18 mm thick BWP grade plywood over which pasting of sunmica 0.80mm of approved shade by EIC/GE with suitable adhesive as approved by EIC/GE in front, sides/back shall be of 18 mm thick BWP plywood and bottom of drawer shall be 9 mm thick BWP Plywood complete. Telescopic channel (Make: Hettich/ Ebco/Quba /Klazovyn) and CP Handle 4\\" as per sample held in BSO yard be provided in Drawers all as directed by GE/EIC. Synthetiv Enamel Paint to be applied two coats in all surfaces after applying wooden putty except front of drawers |
| 31 | 12 mm thick back ply BWP grade of table dressing box as per drg. |
| 32 | Supply and fixing of Mirror for dressing ladies as per drg. Looking Mirror shall be Make of Saint Gobbain/ Modi guard/ Atul . Frame of mirror will be made as per drg |
| 33 | Stool Dressing with Cushion (FD/MAP-II/07)Cabinet box for stool dressing with 18 mm thick BWP grade plywood ( Make: Green Gold from Greenply/Gold from Archidply/ Bond 710 from Century ply)) over which pasting of sunmica 0.80mm ( Make: Greenply/Archidply/Century ply) of shade approved by EIC/GE with suitable adhesive on one side and duco paint to be applied two coats on other side all as directed by GE/EIC and as per drg. Back ply shall be 12 mm BWP grade as per drg. |
| 34 | Supply and fixing cushion of size as per drg 40 density (Model name :Primo of make Sleep well /Model name Goldline Plus of make :Kurlon), including tapesty cloth of best quality (cost not less than Rs.500/- per metre ) and fxing over ply of suitable size required shape and colour complete as per sample all as specified and shown in drawing and directet by EIC |
| 35 | Heavy duty Revolving Nylon double wheels as per drg.Rest all as per drg and approved by Engr-in-Charge. |
| 36 | Table writing Top 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Action Tesa/Century Ply/Archid ply duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 1.6 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg. |
| 37 | Legs as per drg |
| 38 | Foot rest as per drg |
| 39 | Stiffener side as per drg |
| 40 | Cabinet box with vertical and horizontal partitions with 18 mm thick BWP grade plywood ( Make: Green Gold from Greenply/Gold from Archidply/ Bond 710 from Century ply)) over which pasting of sunmica 0.80mm ( Make: Greenply/Archidply/Century ply) pasted on exposed view and other side with balancing white sunmica with suitable adhesive of shade approved by EIC/GE all as directed by GE/EIC. Back ply shall be 12 mm BWP grade. |
| 41 | Cabinet door made out of 18 mm thick BWP grade plywood ( Make: Green Gold from Greenply/Gold from Archidply/ Bond 710 from Century ply)) over which pasting of sunmica 0.80mm ( Make: Greenply/Archidply/Century ply) pasted on exposed view and other side with balancing white sunmica with suitable adhesive of shade approved by EIC/GE and drg. Lock (Make: Hettich/Ebco/Quba/Klazovyn) and CP Handle 4\\" (Make: Hettich/Ebco/Quba/Klazovyn) be provided in Cabinet all as directed by GE/EIC and as per drg. |
| 42 | Back ply BWP grade as per drg. |
| 43 | Drawer made of 18 mm thick BWP grade plywood over which pasting of sunmica 0.80mm of approved shade by EIC/GE with suitable adhesive as approved by EIC/GE in front, sides/back shall be of 18 mm thick BWP plywood and bottom of drawer shall be 9 mm thick BWP Plywood complete. Telescopic channel (Make: Hettich/Ebco/Quba/Klazovyn) and CP Handle 4\\" as per sample held in BSO yard be provided in Drawers all as directed by GE/EIC. Synthetiv Enamel Paint to be applied two coats in all surfaces after applying wooden putty except front of drawers. |
| 44 | Table 3'X2' with / without Drawer (FD-284/283)Top 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked (Action Tesa/Century Ply/Archid ply) duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 1.6 mm thick PVC edging of Make-Rehau/Pegasus/Kynex shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all as per drg. |
| 45 | Legs as per drg |
| 46 | Long rail as per drg |
| 47 | Short rail as per drg |
| 48 | Center Stiffener as directed by EIC |
| 49 | Short stiffener as per drg |
| 50 | Drawer made of 18 mm thick BWP grade plywood over which pasting of sunmica 0.80mm of approved shade by EIC/GE with suitable adhesive as approved by EIC/GE in front, sides/back shall be of 18 mm thick BWP plywood and bottom of drawer shall be 9 mm thick BWP Plywood complete. Telescopic channel (Make: Hettich/Ebco/Quba/Klazovyn) and CP Handle 4\\" as per sample held in BSO yard be provided in Drawers all as directed by GE/EIC. Synthetiv Enamel Paint to be applied two coats in all surfaces after applying wooden putty except front of drawers. |
| 51 | Fancy Knob CP as per sample held in yard. |
| 52 | Wooden corners to be provided all as directed by EIC/GE. |
| 53 | Table 3'X2' with / without DrawerFD-55/284/283 or simillar (a) Anti-termite and anti-bug treatment shall be done before polishing the wooden items.(b) M&L for melamine polish high gloss/mate finish with spray machine applying shellac,wood filler,shelar etc after removing of complete existing polish making surfae smooth by sand paper (Emery paper) with standard workmanship as directed by EIC to the following furniture articles of MES pattern viz F/DB/FD/MAP series/TP or Similar items incl applying wax for depressed surface as well as washing with caustic soda wherever required before polishing all as specified and all as directed by Engineer-in-Charge. Shade of polishing/pinting will be directed by GE/Engr-in-Charge. c) Work will be executed where the furniture exist in different User Units at OTM/Md Accn under the jurisdiction of GE (West) Allahabad including BSO's Furniture Yard as directed by Engineer-in-Charge. |
| 54 | Table 3'X3' |
| 55 | Table Dining 4 Persons : |
| 56 | Table Dining 6 Persons : |
| 57 | Table Dining 8 Persons : |
| 58 | Table writing |
| 59 | Table Dressing Ladies |
| 60 | Table Dressing Ladies (MAP) |
| 61 | Table Centre |
| 62 | Side Board |
| 63 | Teapoy |
| 64 | Table Bed Side |
| 65 | Peg Table |
| 66 | Stool Dressing with Cushion |
| 67 | Book Case Wooden |
| 68 | Bin Linen Multipurpose |
| 69 | Bed Hard |
| 70 | Chair dining |
| 71 | Chair writing |
| 72 | Chair easy |
| 73 | Table office officer wdn |
| 74 | Table office clerk wdn |
| 75 | Chair writing map with cushion (FD/E6/MAP/12) (powder coating painting as per drg specification duly removing the existing paint or directed by Engr-in-Charge) |
| 76 | Table ExecutivePoishing of various type of TP furniture with Duco Paint by scrubing of the full existing polish of the furniture with water paper/ sand paper with disturbing the surface of the the furniture and applying two coat of duco paint with proper spray painting machine and gun to give it aesthatic or uniform look as required complete all as specified and directed by the Engineer-in-Charge.There should be atleast one day gap in each step during polishing. |
| 77 | Chair visitor wooden |
| 78 | Side unit |
| 79 | Pedastal with drawer |
| 80 | Table Peg with Glass top |
| 81 | Center table with Glass top |
| 82 | Corner Table with Glass top |
| 83 | Recanning of various types of chairs / stool with plastic cane half round 2mm wide 0.35 mm thick (4mm wide semi round for border) best quality as per Godrej pattern including removing of old cane complete all as specified and directed. Make of cane : Premier/SHAH |
| 84 | BED PLY WOOD TOP ( FD-246)Long Rail all as shown on drg and as specified. |
| 85 | Stiffners all as shown on drg and as specified |
| 86 | Head Rest complete as shown on drawing and as specified . |
| 87 | Foot Rest complete all as shown on drawing and as specified. |
| 88 | Replacement of unserviceable Top with Ply top 12 mm thick BWP Grade (Make: Green Gold from Greenply/Gold from Archidply/ Bond 710 from Century ply) all as per drg. |
| 89 | Replacement of Teak face ply 4 mm thick (Make: Green Gold from Greenply/Gold from Archidply/ Bond 710 from Century ply) in head rest as per drg. |
| 90 | Replacement of Teak face ply 4 mm thick (Make: Green Gold from Greenply/Gold from Archidply/ Bond 710 from Century ply) in foot rest as per drg. |
| 91 | Wooden corners to be provided in shape all as directed by EIC/GE. |
| 92 | PVC Shoes 35 mm dia superior quality all as specified and as per drg. |
| 93 | ALMIRAH LARGE STEEL 1/21H, 1/2 S ( FD/E6/MAP/18)Steel 6 lever locks (Make : Godrej/Link/Harison ) with duplicate key as per drg |
| 94 | CP Handle as per drg |
| 95 | Legs as per drg |
| 96 | Repairs to door as specified including replacement of hinges |
| 97 | Repair/adjustment to existing shelf including welding as per drg |
| 98 | Shutter/Drawer as per drg. |
| 99 | Shelf as per drg |
| 100 | Locking arrangement complete including MS bar. |
| 101 | Welding wherever required as directed by GE/EIC |
| 102 | Material and labour for preparation of old / new painted steel surfaces (external and internal duly rubbing the whole almirah including intenally and existing old paint from almirah by using emery paper) and applying powder coating paint as per drawing with stage passing with full satisfaction of E-in- Charge including preparation of surfaces and filling cavities with putty and primer wherever required complete all as specified and directed by the Engineer-in-Charge.There should be atleast one day gap between every step of painting. |
| 103 | Almirah Large Steel (FD-67 / 1031/ TP/MAP)Steel 6 lever locks (Make : Rydass/Link/EBCO) as per drg |
| 104 | CP Handle as per drg |
| 105 | Legs as per drg |
| 106 | Repairs to door as specified including replacement of hinges |
| 107 | Repair/adjustment to existing shelf including welding as per drg |
| 108 | Shutter/Drawer as per drg. |
| 109 | Shelf as per drg |
| 110 | 3 way Locking arrangement complete including MS bar. |
| 111 | Welding wherever required as directed by GE/EIC |
| 112 | Almirah Medium / Small Steel (FD-1032/FD-104(m) )Steel 6 lever locks (Make : Rydass/Link/EBCO) as per drg |
| 113 | CP Handle as per drg |
| 114 | Legs as per drg |
| 115 | Repairs to door as specified including replacement of hinges |
| 116 | Repair/adjustment to existing shelf including welding as per drg |
| 117 | Shutter/Drower as per drg. |
| 118 | Shelf as per drg |
| 119 | 3 way Locking arrangement complete including MS bar. |
| 120 | Welding wherever required as directed by E-in-Incharge |
| 121 | Material and labour for preparation of old / new painted steel surfaces (external and internal duly rubbing the whole almirah including intenally and existing old paint from almirah by using emery paper) and applying powder coating paint as per drawing with stage passing with full satisfaction of E-in- Charge including preparation of surfaces and filling cavities with putty and primer wherever required complete all as specified and directed by the Engineer-in-Charge.There should be atleast one day gap between every step of painting. |
| 122 | Repair of sofa sets 05 seater (Make: Godrej/ Durian or similar type TP)Material and labour for in replacement of unserviceable pure leather upholstering from seat and back of sofa set of five seater (Special) with new material pure leather of approved quality from the same brand and colour including 40 density cushion 100mm/110mm high (Model name :Primo of make Sleep well /Model name Goldline Plus of make :Kurlon) as required size and shape and replacement of all spring dumb bell shape 10 gauge with 100mm dia and 100mm/150mm high with new steel spring copper coated, complete duly French polished on wooden surface from all sides complete directed.Note : Pure leather upholstry should be purchase from original OEM and shade shall be as approved by GE .Trade pattern/ Godrej/ Durrian complete all as specified and shown in drawing and directed. |
| 123 | Material and labour for in replacement of cushion of size 560 mm X 530 mm X 100 mm thick, 40 density (Model name :Primo of make Sleep well /Model name Goldline Plus of make :Kurlon), including tapesty cloth of best quality (cost not less than Rs.400/- per metre) and stitching in required shade and colour including one side shall be left open by giving proper margin of cloth towards inside upto 2 inch for the purpose of washing to cover complete as per sample all as specified and shown in drawing and directed. |
| 124 | Supply and fixing cushion of size Chair dining map as per drg 40 density (Model name :Primo of make Sleep well /Model name Goldline Plus of make :Kurlon), including tapesty cloth of best quality (cost not less than Rs.500/- per metre ) and fxing over ply of suitable size required shade and colour complete as per sample all as specified and shown in drawing and directed. |
| 125 | Sofa 5 seater with cushion TPMaterial and labour for dry cleaning for cloathing, textiles and upholestry using a chemical solvent other than water after preparation of surface including repair and stiching to the following furniture items all over complete and as directed by Engr-in-charge. |
| 126 | Sofa single seater with cushion TP |
| 127 | Chair dining with cushioned |
| 128 | Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material. Please Enable Macros to View BoQ information |
