|
| 1 | Supply & Fixing in repairs Galvanized 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins, etc ( each line of wire to be measured) complete all as specified and directed. |
| 2 | Supply and fixing of Razor blade galvanized barbed concertina coil 1.05m dia coil stretched to a length of 10m to 12m to achieve 950mm dia as in fencing including supply and fixing with special galvanized fasteners such as 'J' clips 'C' clips including dismantling of existing concertina coils any description complete all as specified |
| 3 | Demolition of cement concrete in ground floor / paving not exceeding 15Cm thick below or above GL unreinforced complete all as specified . |
| 4 | Material & Labour plain cement concrete type D2, 1:4:8, Cement concrete in foundations, filling and mass concrete complete all as specified and directed. |
| 5 | Demolition of brick or stone masonry built in cement mortar including all quoins, arches, pillars and angle iron fixed at top etc complete all as specified and directed. |
| 6 | Material & Labour for Walling of random rubble masonry un coursed built in cement mortar 1:6 complete all as specified and directed. |
| 7 | Ditto all as per item No. 6.00 but with old stone masonry ( Except stone) complete all as specified and directed. |
| 8 | Material & Labour for Pre-cast cement concrete block Type B1 (20 mm graded aggregate) masonry with solid blocks, exc. 10 cm in width and setting in Cement Mortar 1:6, complete all as specified and directed. |
| 9 | Raking out joints / pointing to random rubble or polygonal rubble uncoursed or brought up to courses built in cement mortar complete all as specified and directed. |
| 10 | Material & Labour for Keyed pointing to random rubble uncoursed masonry in CM 1:4 complete all as specified and directed. |
| 11 | Dismantling wrought iron or mild steel work of any description complete all as specified and directed. |
| 12 | Framed work such as in grills, gratings with ends of bar shouldered and/ or riveted forged into spikes including welding all as specified & directed. |
| 13 | S& F Mild steel angle iron cut to shape as directed drilling holes notching for wire as in posts and struts in fencing etc including all necessary cutting and welding etc and for similar work complete all as specified. |
| 14 | Material & Labour String courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, Type B1, 1 : 2 : 4 (using 20mm graded stone aggregate) for holding down angles including necessary form work complete all as specified and directed. |
| 15 | Dismantling of fencing wire mesh any type and size complete all as specified and directed. |
| 16 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed. |
| 17 | Material & Labour for MS work like posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work complete all as specified and as directed |
| 18 | Excavation in post holes (or similar holes) each n exc 0.5 cum and getting out, soft loose soil and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and directed. |
| 19 | Material & Labour for cement concrete type C-2 , 1 : 3 : 6 (using 40mm graded stone aggregate) in foundation and filling concrete for columns, fencing posts etc complete all as specified and directed. |
| 20 | Supply & Fixing for mild steel screw bolts (machine cut) with hexagonal or square heads at one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square not exceeding 5 cm long and diameter of neck 5 to 10mm complete all as specified and directed. |
| 21 | Supply only PVC coated Chain Link fencing of 50mm x 50mmx 4mm mesh size complete all as specified and directed. |
| 22 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and directed. |
| 23 | Material & Labour mild steel Round bars Fe 410W (Gde.E-250) quality-A, 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for stiffeners complete all as specified and directed. |
| 24 | Material & Labour for brick work with fly ash bricks bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 25 | Taking down cement plaster on brick or stone wall and concrete surfaces etc including racking out joints, hacking for key, scrubbing down with water etc.complete all as specified and directed. |
| 26 | Material & Labour for rendering 15 mm thick on concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and directed. |
| 27 | Material & Labour for preparation of newly plastered surfaces & applying 2 coat of cement base paint over a coat of alkali resistant priming paint on walls complete all as specified and directed. |
| 28 | S& F Mild steel work cut to shape as directed drilling holes and fixing of PVC jally as in posts in fencing etc including all necessary cutting and welding etc and for similar work complete all as specified. |
| 29 | S &F for 23-24mm thick PVC jallies CNC machine cut as per the approved pattern and design as approved by GE. The PVC Jallies shall be fixed with the help of screw/nut bolt of suitable size and numbers as decided by the Engr-in-Charge. PVC Jallies shall be fixed to the existing steel frame work after replacing of rusted steel including necessary welding work complete all as specified and as directed. Note: MS steel work will be measured and paid separately under relevant item of Bow. |
| 30 | Preparation of new or previously untreated surface exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide on steel surfaces all as specified. |
| 31 | Material and labour Preparation of old surfaces exc 10cm width or girth and applying one coat of synthetic enamel paint on steel surfaces complete all as specified and directed. Please Enable Macros to View BoQ information |
